LG D631 McAfee account reset question [Solved]

[Medofficiel]

hello team i need to remove McAfee account here logs

Welcome to Medusa Pro Software version 1.5.5.
Started.
Reader #0: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : D631
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D631_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : LG
Model : D631
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D631_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID : 1101003030384745300019E1039251EF
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) 19E10392
Manufacturing date : 05/2014
---------------------------------------------------------------
CSD Info

CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 704512
Number of sectors : 4194304
Device Manufacturer :lge
Device Platform :msm8226
Build ID :LRX22G
Display Build ID :LRX22G
Release ID :5.0.2
Device Model :LG-D631
Device Name :b2l_att_us
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :b2l_att_us-user 5.0.2 LRX22G 151562013570b release-keys

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/008GE0_16_03_2018_15_10_11.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
Please select file.

Switched to boot area partition 1.
Opening C:/Users/SIMO/Desktop/Toshiba eMMC 008GE0_16_03_2018_15_10_43.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 1.5.5; FW: 1.23.

Switched to boot area partition 2.
Opening C:/Users/SIMO/Desktop/Toshiba eMMC 008GE0_16_03_2018_15_11_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 1.5.5; FW: 1.23.

[Medusa Box]

Hello.

Please read out "misc" partition to binary file, upload somewhere and post here link.

[Medofficiel]

Originally Posted by Medusa Box

Please read "misc" partition into binary ("*.bin") file, not into "*.srf". To read partitions into binary files do the following: connect the device, press "Partition manager" button in Software, select necessary partitions, check (select) «Read each partition into separate binary («*.bin») file» option in the software and press "Read".

here sir
https://www.4shared.com/file/gjmC-F8..._2018_11_.html

[Medusa Box]

OK, we will patch it and will send You here to You write pathed "misc" partition back into the phone. Please read out Full flash from your device (connect the device, select "Full" option in Software and press "Read" button), it is better always to have full backup.

[Medofficiel]

Originally Posted by Medusa Box

OK, we will patch it and will send You here to You write pathed "misc" partition back into the phone. Please read out Full flash from your device (connect the device, select "Full" option in Software and press "Read" button), it is better always to have full backup.

full backup done waiting you ^^

[Medusa Box]

OK, here is the patched "misk" partition for You: https://drive.google.com/file/d/1pw4...28pqn8fIp/view.

Accordingly to Software log, the start address of "misk" partition on flash chip is 0002BC00 and length - 00008000.

P13: misc (0002BC00, 00008000) 16 MB

So, to write "misk" partition, do the next:

1. Connect the device.
2. Select "Custom" option in Software.
3. Select "Hex block" type of data.
4. Set "Start: 0002BC00".
5. Set "Length: 00008000".
6. Press "Write" button, select "misk" partition file and write it.

After writing of the patched "misk" partition, You shouldn't power the phone ON! If You will power on the phone, "misk" partition will be rebuilded by phone and Mcafee account will remain. So after writing the patched "misk" partition, You need to put the phone into Download (Emergency) Mode manually and re-flash it with the same firmware version, which is in the phone now, or with higher firmware version. After writing firmware, check, whether Mcafee account was removed.

[Medofficiel]

Originally Posted by Medusa Box

OK, here is the patched "misk" partition for You: https://drive.google.com/file/d/1pw4...28pqn8fIp/view.

Accordingly to Software log, the start address of "misk" partition on flash chip is 0002BC00 and length - 00008000.

So, to write "misk" partition, do the next:

1. Connect the device.
2. Select "Custom" option in Software.
3. Select "Hex block" type of data.
4. Set "Start: 0002BC00".
5. Set "Length: 00008000".
6. Press "Write" button, select "misk" partition file and write it.

After writing of the patched "misk" partition, You shouldn't power the phone ON! If You will power on the phone, "misk" partition will be rebuilded by phone and Mcafee account will remain. So after writing the patched "misk" partition, You need to put the phone into Download (Emergency) Mode manually and re-flash it with the same firmware version, which is in the phone now, or with higher firmware version. After writing firmware, check, whether Mcafee account was removed.

can't find custom option in software

[Medofficiel]

Originally Posted by Medusa Box

OK, here is the patched "misk" partition for You: https://drive.google.com/file/d/1pw4...28pqn8fIp/view.

Accordingly to Software log, the start address of "misk" partition on flash chip is 0002BC00 and length - 00008000.

So, to write "misk" partition, do the next:

1. Connect the device.
2. Select "Custom" option in Software.
3. Select "Hex block" type of data.
4. Set "Start: 0002BC00".
5. Set "Length: 00008000".
6. Press "Write" button, select "misk" partition file and write it.

After writing of the patched "misk" partition, You shouldn't power the phone ON! If You will power on the phone, "misk" partition will be rebuilded by phone and Mcafee account will remain. So after writing the patched "misk" partition, You need to put the phone into Download (Emergency) Mode manually and re-flash it with the same firmware version, which is in the phone now, or with higher firmware version. After writing firmware, check, whether Mcafee account was removed.

done download mode ok
but cant find the higher firmware please help

Platform: LG Qualcomm
Selected port: COM11
Selected model: D631
Reading info...
Model ID: LG-D631
IMEI: 014087-00-087394-4
Android version: 5.0.2
Battery level: 89%
SW Version: D63120d
Mode: Emergency
Initializing flash...OK
SW version: LGD631AT-00-V20d-ATT-US-JUN-05-2015+0
Android version: 5.0.2
LAF Version: 1.1
Product ID: CT65S140824002126
IMEI: 014087-00-087394-4
Target operator: ATT
Hardware: rev_10
Performed by 2.8.0 Software version.

[Medofficiel]

Solved kill switch disabled done first in the world

[yusniel]

Link deleted, please reupload, i need patched misc partition

Originally Posted by Medusa Box

OK, here is the patched "misk" partition for You: https://drive.google.com/file/d/1pw4...28pqn8fIp/view.

Accordingly to Software log, the start address of "misk" partition on flash chip is 0002BC00 and length - 00008000.

So, to write "misk" partition, do the next:

1. Connect the device.
2. Select "Custom" option in Software.
3. Select "Hex block" type of data.
4. Set "Start: 0002BC00".
5. Set "Length: 00008000".
6. Press "Write" button, select "misk" partition file and write it.

After writing of the patched "misk" partition, You shouldn't power the phone ON! If You will power on the phone, "misk" partition will be rebuilded by phone and Mcafee account will remain. So after writing the patched "misk" partition, You need to put the phone into Download (Emergency) Mode manually and re-flash it with the same firmware version, which is in the phone now, or with higher firmware version. After writing firmware, check, whether Mcafee account was removed.

[Medusa Box]

You can't use "misc" partition from another phone, this may lead to damage your device. Please read out "misc" partition and post here link, we will patch it and send You to write it.

[yusniel]

Originally Posted by Medusa Box

You can't use "misc" partition from another phone, this may lead to damage your device. Please read out "misc" partition and post here link, we will patch it and send You to write it.

Here its my Misc partition...

https://mega.nz/#!FZImjAbD!ypZ6I2ifI...CHkooPX6fOkpnI


Thanks

[Medusa Box]

Please, check your PM.

[lilshane]

Originally Posted by Medusa Box

You can't use "misc" partition from another phone, this may lead to damage your device. Please read out "misc" partition and post here link, we will patch it and send You to write it.

patch this misc for me:


https://drive.google.com/file/d/1qFy...ew?usp=sharing

[Octopus box]

Hello.

Please, check your PM.