Care Unlock  
Your online unlock store
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > GSMServer Products > Medusa
Reload this Page LG E510 problem repair [Solved]
Register FAQDonate Forum Rules ★. iPhone Unlock .★ -= JTAG BOOM =- .: Nokia Unlock :. Search Today's Posts Mark Forums Read

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 06-18-2012, 09:30   #1 (permalink)
Freak Poster
 
huahaonam's Avatar
 
Join Date: Nov 2008
Location: VietNam Team
Age: 38
Posts: 295
Member: 890799
Status: Offline
Sonork: 100.999999
Thanks: 896
Thanked 321 Times in 77 Posts
LG E510 problem repair [Solved]
dead flash die in octopus box, i cant repair in medusa
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Please connect the target device and power it on...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
JTAG speed : 6000 KHz.
VREF level : 2.64 V
CPU : Qualcomm MSM7227T
Core ID : 503C00E1
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
ERROR[045]: Scan chain is too long or damaged. Scanned TAP ID's list:
0xFFFC00E1
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
JTAG speed : 6000 KHz.
VREF level : 2.64 V
CPU : Qualcomm MSM7227T
Core ID : 503C00E1
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
JTAG speed : 6000 KHz.
VREF level : 2.64 V
CPU : Qualcomm MSM7227T
Core ID : 503C00E1
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
ERROR[030]: TDO is constant high. Please check target device connection.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
JTAG speed : 6000 KHz.
VREF level : 2.64 V
CPU : Qualcomm MSM7227T
Core ID : 503C00E1
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
ERROR[045]: Scan chain is too long or damaged. Scanned TAP ID's list:
0xF03C00E1
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
ERROR[045]: Scan chain is too long or damaged. Scanned TAP ID's list:
0xFFFFFFE1
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
0xFFFFFFFF
MI: Medusa JTAG init failed.
Last edited by Medusa Box; 06-18-2012 at 10:43.
 
Old 06-18-2012, 09:40   #2 (permalink)
Freak Poster
 
huahaonam's Avatar
 
Join Date: Nov 2008
Location: VietNam Team
Age: 38
Posts: 295
Member: 890799
Status: Offline
Sonork: 100.999999
Thanks: 896
Thanked 321 Times in 77 Posts
Problem Solved, THank Medusa team

Welcome to Medusa Box Software version 1.5.0.1
Selected device model: LG E510
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Please connect the target device and power it on...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.64 V
CPU : Qualcomm MSM7227T
Core ID : 503C00E1
Flash device: Micron 512Mb
Flash ID : 002C55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Opening "C:\Program Files\GsmServer\Medusa\Firmware\LG_E510_Repair.mf" file...
Writting BOOT section. Please wait... Done
Disconnected
Repair done.
 
The Following User Says Thank You to huahaonam For This Useful Post:
Closed Thread

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
thread Thread Starter Forum Replies Last Post
Sim card sleep mode problem with 6130 ratzfatz Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 4 05-22-2012 11:13
GId1 problem old_man Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 1 10-18-2006 15:21
6110 5.47 sw unlock problem gsms Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 3 11-21-1999 18:43
6150 Lock Problem Zeljko Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 1 09-11-1999 17:39
HELP: Problem with 5110 Xabi Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 1 07-16-1999 00:44


All times are GMT +1. The time now is 21:30.

Contact Us - GSM-Forum by zfrank - Archive - Top


Powered by Searchlight © 2013 Axivo Inc.
- GSM Hosting Ltd. - 1999-2013 -
Page generated in 0.27049 seconds with 11 queries

SEO by vBSEO