Care Unlock  
Your online unlock store
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > GSMServer Products > Medusa
Reload this Page Lg lu6200 to lg p930 ltag
Register FAQDonate Forum Rules ★. iPhone Unlock .★ -= JTAG BOOM =- .: Nokia Unlock :. Search Today's Posts Mark Forums Read

Reply
Page 1 of 3 1 23
 
LinkBack Thread Tools Display Modes
Old 06-27-2012, 12:11   #1 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Lg lu6200 to lg p930 ltag
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: LG P930
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
Please connect the target device and power it on...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
Please connect the target device and power it on...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.


How to get to work? thank you.
  Reply With Quote
Old 06-27-2012, 12:25   #2 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
Hello.
Your phone has different CPU ID then in LG P930. At first, please try to connect your device in Auto Mode - select "Manufacturer: Auto", "Device model: Qualcomm APQ8060" and try to connect.
  Reply With Quote
Old 06-27-2012, 13:18   #3 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: LG P930
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
ERROR[035]: Target device has been powered off during connect.
Selected device model: LG P930
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
ERROR[035]: Target device has been powered off during connect.
Selected device model: Qualcomm APQ8060
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
  Reply With Quote
Old 06-27-2012, 13:19   #4 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Adding support? thank you.
  Reply With Quote
Old 06-27-2012, 13:21   #5 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
Try to connect your device in Auto Mode - select "Manufacturer: Auto", "Device model: Qualcomm APQ8060" and try to connect.
  Reply With Quote
Old 06-28-2012, 03:12   #6 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: Qualcomm APQ8060
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
  Reply With Quote
Old 06-28-2012, 03:13   #7 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: Qualcomm APQ8060
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
  Reply With Quote
Old 06-28-2012, 03:17   #8 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: Qualcomm APQ8060
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
Attached Images
File Type: jpg ???.jpg (126.3 KB, 28 views)
Last edited by speedcomtop; 06-28-2012 at 03:23.
  Reply With Quote
Old 06-28-2012, 03:44   #9 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: Qualcomm APQ8060
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
Selected device model: Qualcomm QSD8250/QSD8650
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 202400E1.
Selected device model: Auto
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[010]: Unsupported device CPU. Core ID = 105310E1.
Selected device model: Qualcomm APQ8060
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 105310E1, expected ID = 106A10E1.
Attached Images
File Type: jpg IMG_0075.jpg (523.9 KB, 45 views)
File Type: jpg IMG_0077.jpg (517.2 KB, 29 views)
File Type: jpg IMG_0083.jpg (568.7 KB, 36 views)
  Reply With Quote
Old 06-28-2012, 05:27   #10 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
We will add this new core ID in next update for test.
  Reply With Quote
Old 06-28-2012, 06:58   #11 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Quote:
Originally Posted by Medusa Box View Post
We will add this new core ID in next update for test.
thank you.medusa-box
  Reply With Quote
Old 07-02-2012, 10:22   #12 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
There is unsupported CPU in your phone (MSM8660), in P930 there is another CPU - APQ8060. We have sent You test version to your PM. Please install this version, slect "Manufacturer: Auto", "Device model: Qualcomm MSM8x60" and try to connect your device.
  Reply With Quote
Old 07-03-2012, 12:22   #13 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Selected device model: Qualcomm MSM8x60
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : Qualcomm MSM8660
Core ID : 105310E1
Storage Device: Hynix eMMC HYNIX
Device ID : 00904A01
Block size : 512 bytes
Blocks : 7061504
Storage size : 3448 Mb
Connect successful.
Disconnected
Selected device model: Qualcomm MSM8x60
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : Qualcomm MSM8660
Core ID : 105310E1
Storage Device: Hynix eMMC HYNIX
Device ID : 00904A01
Block size : 512 bytes
Blocks : 7061504
Storage size : 3448 Mb
Connect successful.
Opening "D:\Medusa\Firmware\LG_P930_Repair.mf" file...
ERROR[033]: Selected Repair file is declared for another device model.
  Reply With Quote
Old 07-03-2012, 12:31   #14 (permalink)
Freak Poster
 
Join Date: Jul 2003
Location: hk
Posts: 396
Member: 33368
Status: Offline
Thanks: 0
Thanked 1 Time in 1 Post
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 105310E1, IR Length = 11.
JTAG speed : 1000 KHz.
VREF level : 1.79 V
CPU : Qualcomm MSM8660
Core ID : 105310E1
Storage Device: Hynix eMMC HYNIX
Device ID : 00904A01
Block size : 512 bytes
Blocks : 7061504
Storage size : 3448 Mb
Connect successful.
Opening "D:\Qualcomm MSM8x60 Boot 03-07-2012 19_22_53.bin" file...
Reading BOOT section. Please wait... Done
Opening "D:\Qualcomm MSM8x60 Boot 03-07-2012 19_22_53.bin" file...
Writting BOOT section. Please wait...
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Disconnected
  Reply With Quote
Old 07-04-2012, 05:32   #15 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
What is this file? Is it from working LU6200?
  Reply With Quote
Reply
Page 1 of 3 1 23

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
thread Thread Starter Forum Replies Last Post
where to find a working program all they have some errors ?? fondas Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 2 12-12-2012 12:26
How to add a language in 51xx/61xx tati Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 7 12-10-2012 04:46
How to upload a new firmware... Brand Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 28 08-30-2012 03:40
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 6 12-18-2011 11:00
Copy from one 6110 to another Leif Nielsen Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 1 06-10-1999 22:36


All times are GMT +1. The time now is 05:14.

Contact Us - GSM-Forum by zfrank - Archive - Top


Powered by Searchlight © 2013 Axivo Inc.
- GSM Hosting Ltd. - 1999-2013 -
Page generated in 0.43255 seconds with 12 queries

SEO by vBSEO