Medusa Box 1.4.2 - public discussion thread - GSM-Forum

Gsmserver · 04-06-2012, 10:15

Medusa Box v1.4.2 is out! Added support for Qualcomm APQ8060 Application Processor with eMMC storage devices. Also added support for Samsung SGH-T989, SHW-A250K, SHV-E110S, GT-S5560i, SCH-I500, SGH-A927, Motorola MB200, LG P930, P935.

Medusa Box v1.4.2 Release Notes:

Added support for the following models:
- Samsung SGH-T989 - added Dead Boot/Phone Repair.
- Samsung SHW-A250K - added Dead Boot/Phone Repair.
- Samsung SHV-E110S - added Dead Boot/Phone Repair.
- Samsung GT-S5560i - added Dead Boot/Phone/IMEI Repair.
- Samsung SCH-I500 - added Dead Boot/Phone Repair (thanks to Dr.Wolodya).
- Samsung SGH-A927 - added Dead Boot/Phone Repair (thanks to Dr.Wolodya).
- Motorola MB200 - added Dead Boot/Phone Repair (thanks to Dr.Wolodya).
- LG P930 - added Dead Boot/Phone Repair.
- LG P935 - added Dead Boot/Phone Repair.
Improved repair procedure for HTC Wildfire S (added support for devices with flash chips of 2K page size; note that you'll need to re-download repair file).
Improved repair procedure for Samsung GT-I9100 (note that you'll need to re-download repair file).
Improved repair procedure for Samsung GT-N7000 (note that you'll need to re-download repair file).
Added some improvements to the main software.

Medusa Box team is endlessly grateful to customers who were actively involved in improving this software.

Download Medusa Box v1.4.2
____________________________
WBR,
Medusa Box Team

Andrew_n10 · 04-06-2012, 10:32

Wildfire S

Connect successful.
Write protection disabled.
Repairing CID and IMEI... Done
Disconnected
Selected device model: HTC Wildfire S (PG76100)
Connecting. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 2.64 V
CPU : Qualcomm MSM7227T
Core ID : 203C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID : 00AD55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID : HTC__032
IMEI : 359465-04-******
Connect successful.

good!

wissaserpent · 04-06-2012, 10:51

thanks medusa team...

big big update.

bencharqui1 · 04-06-2012, 10:59

thanks medusa team...

big big update.

AlfskieServer · 04-06-2012, 11:18

Please add WT19i deadboot in next update

amyll · 04-06-2012, 14:25

good update thanks medusa team.

halfa40gsm · 04-06-2012, 15:28

thanks medusa team...
big big update.

sraul · 04-06-2012, 18:34

after repair boot does not enter download mode S5560i

here mi log

Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.92 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
Flash device: Samsung OneNAND KFH2G16Q2M
Flash ID : 00EC0040
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Opening "C:\Archivos de programa\GsmServer\Medusa\Firmware\SAMSUNG_GTS5560 I_Repair.mf" file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.

Medusa Box · 04-07-2012, 08:00

Make Erase Full flash and then make Repair again.

sraul · 04-07-2012, 20:16

Welcome to Medusa Box Software version 1.4.2
Selected device model: Samsung GT-S5560i
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.92 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
Flash device: Samsung OneNAND KFH2G16Q2M
Flash ID : 00EC0040
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Connect successful.
ECC Mode enabled.
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done
Disconnected
Selected device model: Samsung GT-S5560i
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.92 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
Flash device: Samsung OneNAND KFH2G16Q2M
Flash ID : 00EC0040
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Opening "C:\Archivos de programa\GsmServer\Medusa\Firmware\SAMSUNG_GTS5560 I_Repair.mf" file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.

sraul · 04-07-2012, 20:17

not enter to download mode what is the solution

rochater · 04-08-2012, 02:15

Quote:

Originally Posted by sraul

not enter to download mode what is the solution

I have S5260 same problem, Make Erase Full flash and then make Repair again. don´t work, Medusa box failed repair boot samsung Zzzzzzzzzz.

zenk_011 · 04-08-2012, 06:54

SHV-E160K convert to N7000 it is possible!!

plss advice me team if possible?

or pls add this SHV-E160k for this next update!!

tnx advance!!

xiaoyuz · 04-10-2012, 03:03

Welcome to Medusa Box Software version 1.4.2
Selected device model: HTC Desire S (PG88100)
Connecting. Please wait...
Resetting target. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
ERROR[035]: Target device has been powered off during connect.
Selected device model: HTC Desire S (PG88100)
Connecting. Please wait...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
JTAG speed : Auto (RTCK).
VREF level : 1.76 V
CPU : Qualcomm MSM8255
Core ID : 205700E1
Storage Device: Samsung eMMC
Device ID : 00150001
Block size : 512 bytes
Blocks : 8388608
Storage size : 4 Gb
ERROR[018]: Logical block operation failed at 0 Kb (Hex address 0x00000000). Reason: Read failed.
Selected device model: HTC Desire S (PG88100)
Connecting. Please wait...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
JTAG speed : Auto (RTCK).
VREF level : 1.76 V
CPU : Qualcomm MSM8255
Core ID : 205700E1
Storage Device: Samsung eMMC
Device ID : 00150001
Block size : 512 bytes
Blocks : 8388608
Storage size : 4 Gb
ERROR[018]: Logical block operation failed at 0 Kb (Hex address 0x00000000). Reason: Read failed.

xiaoyuz · 04-10-2012, 03:10

Welcome to Medusa Box Software version 1.4.2
Selected device model: HTC Desire S (PG88100)
Connecting. Please wait...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
JTAG speed : 1000 KHz.
VREF level : 1.79 V
CPU : Qualcomm MSM8255
Core ID : 205700E1
Storage Device: Samsung eMMC
Device ID : 00150001
Block size : 512 bytes
Blocks : 8388608
Storage size : 4 Gb
HTC CID : 11111111
IMEI : 358967-04-371706
Opening "D:\Soft\Medusa\files\HTC_DESIRES_SOFF_Repair. mf" file...
Writting BOOT section. Please wait...
ERROR[018]: Logical block operation failed at 516 Kb (Hex address 0x00081200). Reason: Connection lost.

04-06-2012, 10:15	#1 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 1,962 Member: 21077 Status: Offline Thanks: 280 Thanked 34,553 Times in 1,005 Posts	Medusa Box 1.4.2 - public discussion thread Medusa Box v1.4.2 is out! Added support for Qualcomm APQ8060 Application Processor with eMMC storage devices. Also added support for Samsung SGH-T989, SHW-A250K, SHV-E110S, GT-S5560i, SCH-I500, SGH-A927, Motorola MB200, LG P930, P935. Medusa Box v1.4.2 Release Notes: Added support for the following models: Samsung SGH-T989 - added Dead Boot/Phone Repair. Samsung SHW-A250K - added Dead Boot/Phone Repair. Samsung SHV-E110S - added Dead Boot/Phone Repair. Samsung GT-S5560i - added Dead Boot/Phone/IMEI Repair. Samsung SCH-I500 - added Dead Boot/Phone Repair (thanks to Dr.Wolodya). Samsung SGH-A927 - added Dead Boot/Phone Repair (thanks to Dr.Wolodya). Motorola MB200 - added Dead Boot/Phone Repair (thanks to Dr.Wolodya). LG P930 - added Dead Boot/Phone Repair. LG P935 - added Dead Boot/Phone Repair. Improved repair procedure for HTC Wildfire S (added support for devices with flash chips of 2K page size; note that you'll need to re-download repair file). Improved repair procedure for Samsung GT-I9100 (note that you'll need to re-download repair file). Improved repair procedure for Samsung GT-N7000 (note that you'll need to re-download repair file). Added some improvements to the main software. Medusa Box team is endlessly grateful to customers who were actively involved in improving this software. Download Medusa Box v1.4.2 ____________________________ WBR, Medusa Box Team

04-06-2012, 18:34	#8 (permalink)
sraul Freak Poster Join Date: Mar 2008 Posts: 169 Member: 723678 Status: Offline Thanks: 1,195 Thanked 18 Times in 18 Posts	help me plis after repair boot does not enter download mode S5560i here mi log Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 07926F0F, IR Length = 4. JTAG speed : 1000 KHz. VREF level : 2.92 V CPU : Broadcom BCM2133 Core ID : 07926F0F Flash device: Samsung OneNAND KFH2G16Q2M Flash ID : 00EC0040 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb Write protection disabled. Opening "C:\Archivos de programa\GsmServer\Medusa\Firmware\SAMSUNG_GTS5560 I_Repair.mf" file... Writting BOOT section. Please wait... Done Writting UPCH section. Please wait... Done Repairing IMEI... Done Disconnected Repair done.

04-07-2012, 20:16	#10 (permalink)
sraul Freak Poster Join Date: Mar 2008 Posts: 169 Member: 723678 Status: Offline Thanks: 1,195 Thanked 18 Times in 18 Posts	help please not working Welcome to Medusa Box Software version 1.4.2 Selected device model: Samsung GT-S5560i Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 07926F0F, IR Length = 4. JTAG speed : 1000 KHz. VREF level : 2.92 V CPU : Broadcom BCM2133 Core ID : 07926F0F Flash device: Samsung OneNAND KFH2G16Q2M Flash ID : 00EC0040 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb Write protection disabled. Connect successful. ECC Mode enabled. Erasing BOOT section. Please wait... Done Erasing FIRMWARE section. Please wait... Done Disconnected Selected device model: Samsung GT-S5560i Connecting. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 07926F0F, IR Length = 4. JTAG speed : 1000 KHz. VREF level : 2.92 V CPU : Broadcom BCM2133 Core ID : 07926F0F Flash device: Samsung OneNAND KFH2G16Q2M Flash ID : 00EC0040 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb Write protection disabled. Opening "C:\Archivos de programa\GsmServer\Medusa\Firmware\SAMSUNG_GTS5560 I_Repair.mf" file... Writting BOOT section. Please wait... Done Writting UPCH section. Please wait... Done Repairing IMEI... Done Disconnected Repair done.

04-07-2012, 20:17	#11 (permalink)
sraul Freak Poster Join Date: Mar 2008 Posts: 169 Member: 723678 Status: Offline Thanks: 1,195 Thanked 18 Times in 18 Posts	not enter to download mode what is the solution Last edited by sraul; 04-07-2012 at 20:23.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-06-2012, 10:32	#2 (permalink)
Andrew_n10 Major Poster Join Date: Jun 2005 Age: 28 Posts: 48 Member: 152024 Status: Offline Thanks: 9 Thanked 6 Times in 3 Posts	Wildfire S Connect successful. Write protection disabled. Repairing CID and IMEI... Done Disconnected Selected device model: HTC Wildfire S (PG76100) Connecting. Please wait... ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C10E1, IR Length = 4. MI: Halting target, attempt 1. JTAG speed : 1000 KHz. VREF level : 2.64 V CPU : Qualcomm MSM7227T Core ID : 203C10E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0x0000F00F, cycle 0. MI: Received server capabilities 0x00000037. MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP MI: Watchdog configuration: 0xB800010C, 0x00000001... ok MI: Server init. MI: Received flash ID 0xA0AD55BC. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000037 Flash device: Hynix H8BES0UQ0MCR Flash ID : 00AD55BC Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 4096 Flash size : 512 Mb MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D MI: Configuration done. HTC CID : HTC__032 IMEI : 359465-04-****** Connect successful. good!

04-06-2012, 10:51	#3 (permalink)
wissaserpent Freak Poster Join Date: Aug 2009 Location: algeria Posts: 147 Member: 1108432 Status: Offline Thanks: 162 Thanked 57 Times in 35 Posts	thanks medusa team... big big update.

04-06-2012, 10:59	#4 (permalink)
bencharqui1 Freak Poster Join Date: Aug 2011 Posts: 320 Member: 1629321 Status: Offline Thanks: 366 Thanked 46 Times in 35 Posts	thanks medusa team... big big update.

04-06-2012, 11:18	#5 (permalink)
AlfskieServer Freak Poster Join Date: Mar 2012 Location: AlfskieServer in [PH] Age: 27 Posts: 327 Member: 1729975 Status: Online Sonork: 100.1595998 Thanks: 1,684 Thanked 155 Times in 87 Posts	Please add WT19i deadboot in next update

04-06-2012, 14:25	#6 (permalink)
amyll No Life Poster Join Date: May 2007 Location: Islamic city of Marawi Posts: 608 Member: 502507 Status: Offline Sonork: 100.1620541 Thanks: 1,299 Thanked 178 Times in 149 Posts	good update thanks medusa team.

04-06-2012, 15:28	#7 (permalink)
halfa40gsm Freak Poster Join Date: Aug 2007 Location: algeria Posts: 165 Member: 567909 Status: Offline Thanks: 930 Thanked 27 Times in 22 Posts	thanks medusa team... big big update.

04-07-2012, 08:00	#9 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Make Erase Full flash and then make Repair again.

04-08-2012, 06:54	#13 (permalink)
zenk_011 Freak Poster Join Date: May 2009 Location: batangas Philippines Posts: 285 Member: 1030567 Status: Offline Thanks: 518 Thanked 83 Times in 62 Posts	SHV-E160K convert to N7000 it is possible!! plss advice me team if possible? or pls add this SHV-E160k for this next update!! tnx advance!!

04-10-2012, 03:03	#14 (permalink)
xiaoyuz Product Supporter Join Date: Aug 2004 Age: 27 Posts: 1,370 Member: 76767 Status: Offline Sonork: 100.1594567 Thanks: 682 Thanked 1,088 Times in 229 Posts	Welcome to Medusa Box Software version 1.4.2 Selected device model: HTC Desire S (PG88100) Connecting. Please wait... Resetting target. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. ERROR[035]: Target device has been powered off during connect. Selected device model: HTC Desire S (PG88100) Connecting. Please wait... Resetting target. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 27B360E1, IR Length = 5. JTAG speed : Auto (RTCK). VREF level : 1.76 V CPU : Qualcomm MSM8255 Core ID : 205700E1 Storage Device: Samsung eMMC Device ID : 00150001 Block size : 512 bytes Blocks : 8388608 Storage size : 4 Gb ERROR[018]: Logical block operation failed at 0 Kb (Hex address 0x00000000). Reason: Read failed. Selected device model: HTC Desire S (PG88100) Connecting. Please wait... Resetting target. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 27B360E1, IR Length = 5. JTAG speed : Auto (RTCK). VREF level : 1.76 V CPU : Qualcomm MSM8255 Core ID : 205700E1 Storage Device: Samsung eMMC Device ID : 00150001 Block size : 512 bytes Blocks : 8388608 Storage size : 4 Gb ERROR[018]: Logical block operation failed at 0 Kb (Hex address 0x00000000). Reason: Read failed.

04-10-2012, 03:10	#15 (permalink)
xiaoyuz Product Supporter Join Date: Aug 2004 Age: 27 Posts: 1,370 Member: 76767 Status: Offline Sonork: 100.1594567 Thanks: 682 Thanked 1,088 Times in 229 Posts	Welcome to Medusa Box Software version 1.4.2 Selected device model: HTC Desire S (PG88100) Connecting. Please wait... Resetting target. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 27B360E1, IR Length = 5. JTAG speed : 1000 KHz. VREF level : 1.79 V CPU : Qualcomm MSM8255 Core ID : 205700E1 Storage Device: Samsung eMMC Device ID : 00150001 Block size : 512 bytes Blocks : 8388608 Storage size : 4 Gb HTC CID : 11111111 IMEI : 358967-04-371706 Opening "D:\Soft\Medusa\files\HTC_DESIRES_SOFF_Repair. mf" file... Writting BOOT section. Please wait... ERROR[018]: Logical block operation failed at 516 Kb (Hex address 0x00081200). Reason: Connection lost.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	26	09-25-2012 02:41
DES key Driver	black	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	07-19-2012 05:32
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	05-19-1999 17:41