Medusa PRO v.1.1.5 is out! New Samsung phones has been added. - GSM-Forum

GSM_Support · 07-22-2016, 14:53

Medusa PRO v.1.1.5 is out!

We have added support for Samsung Galaxy Core Prime, Samsung Galaxy J1, Samsung Galaxy J1 Mini, Samsung Z1, Samsung Z3 Tizen and Samsung Galaxy Tab 4 8.0!

Medusa PRO v.1.1.5 Release Notes:

- Added support for the following models via eMMC:
Samsung SM-G360T1 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Samsung SM-J100H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Samsung SM-J105H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Samsung SM-Z130H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Samsung SM-Z300H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Samsung SM-T337T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- Added LG Factory Repair via USB and JTAG interfaces ("*.tot", "*.kdz" and "*.dz" firmware versions are supported)

- Added support for new type of KDZ firmware with "*.dz" files inside

- All pinouts and repair procedures described in the manual ("Help" button in the Software)

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa PRO Software v.1.1.5

szalim · 07-22-2016, 15:16

Good Job Team....Thanks

bronce · 07-22-2016, 15:34

great update team.

ps.
hoping for more samsung j/a/g series to support soon.

shamsulhaq · 07-22-2016, 15:36

demi *** crash handler dbi error fatal

board rev 1.1
ram dump mode
xxxxxxxxx
xxxxxxxxxxx
xxxxxxxxxxxxx

repaire medusa probox via usb cable

please help

Medusa Box · 07-22-2016, 15:46

Try to make Repair via eMMC.

toninhosantos · 07-22-2016, 17:18

Add suport for boot repair samsung by md5 original firmware. Jtag and emmc. Thanks team.Good job.

i-hack · 07-23-2016, 05:01

hi,
Is there a way can we use MEDUSA PRO for normal JTAG or only support DIRECT EMMC????

Medusa Box · 07-23-2016, 07:38

Yes, of course, You can use Medusa Pro Box also to work with JTAG.

gyuriko01 · 07-23-2016, 08:13

Very Good Update good job for good team

jmr · 07-23-2016, 08:23

need dump for G6-U00 any user have

i-hack · 07-23-2016, 12:25

Quote:

Originally Posted by Medusa Box

Yes, of course, You can use Medusa Pro Box also to work with JTAG.

hi but hows connection if direct emmc i can do perfect but in normal jtag phone cant be detected???????

Medusa Box · 07-25-2016, 06:56

Quote:

but in normal jtag phone cant be detected???????

What device do You want to connect via JTAG exactly? Check soldering of all JATG wires and try to connect again. Create new thread with the problem and post there full Software log with connect procedure and photos in high quality of how You have soldered all JTAG wires.

wcelgsm · 07-25-2016, 14:35

Ingles
Problem occurred while opening the new program Medusa Pro 1.1.4
the Box firmware update, and was not recognized more.
Using previous versions worked normal after opening 1.1.4 no longer works on any version

how can I solve this?

Medusa Box · 07-26-2016, 06:51

@ wcelgsm

Hello.

Contact us to Skype, we will check remotely, where can be the problem with your Box.

ddilshod93 · 07-27-2016, 20:47

World the Frist Samsung SM-J110H Connect Emmc and Read file BOOT1.BOOT2,UserDataAre.mpt Done with Medusa Pro

Code:

Please disconnect battery and USB cable.

eMMC interface selected.
Connecting...
Page size    : 512 b
Block size   : 512 b
Block count  : 7634944
Size         : 3728.00 MB
Device       : Hynix eMMC H4G2b
--------------------------------------------------------
CID Info

CID                   : 90014A48344732621101432A0D1B134D
Manufacturer ID       : 0X90
Device/BGA            : BGA(Discrete embeded)
OEM/Application ID    : 0X4A
Product name          : H4G2b
Product revision      : 0.1
Product serial number : (hex)432A0D1B
Manufacturing date    : 01/2016
--------------------------------------------------------
CSD Info

CSD                   : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
--------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes
Boot partition enable : Boot partition 1

Partition config      : 00001000
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H4G2b_28_07_2016_00_59_18.bin.
Connect successful.

Switch succes!!!
Opening D:/Medus PRO/SM-J110H/Hynix eMMC H4G2b_BOOT_1.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:03 
SW: 1.1.5; FW: 1.10.

Switch succes!!!
Opening D:/Medus PRO/SM-J110H/Hynix eMMC H4G2b_BOOT_2.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:03 
SW: 1.1.5; FW: 1.10.
Save to D:/Medus PRO/SM-J110H/Hynix eMMC H4G2b_UserDataAre.mpt file...
Reading partition SBOOT...	Done.
Reading partition SBOOT2...	Done.
Reading partition wfixnv1...	Done.
Reading partition wfixnv2...	Done.
Reading partition tdfixnv1...	Done.
Reading partition tdfixnv2...	Done.
Reading partition WDSP...	Done.
Reading partition MODEM...	Done.
Reading partition MODEM2...	Done.
Reading partition TDDSP...	Done.
Reading partition FOTA_SIG...	Done.
Reading partition wruntimenv1...	Done.
Reading partition wruntimenv2...	Done.
Reading partition tdruntimenv1...	Done.
Reading partition tdruntimenv2...	Done.
Reading partition PARAM...	Done.
Reading partition EFS...	Done.
Reading partition PRODNV...	Done.
Reading partition RESERVED2...	Done.
Reading partition KERNEL...	Done.
Reading partition RECOVERY...	Done.
Reading partition PERSDATA...	Done.
Reading is finished.
SW: 1.1.5; FW: 1.10.

Thanks to GsmServer Team and Developers Medusa Pro

Best Regards
ddilshod93

07-22-2016, 14:53	#1 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,981 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Medusa PRO v.1.1.5 is out! New Samsung phones has been added. Medusa PRO v.1.1.5 is out! We have added support for Samsung Galaxy Core Prime, Samsung Galaxy J1, Samsung Galaxy J1 Mini, Samsung Z1, Samsung Z3 Tizen and Samsung Galaxy Tab 4 8.0! Medusa PRO v.1.1.5 Release Notes: - Added support for the following models via eMMC: Samsung SM-G360T1 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J100H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J105H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-Z130H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-Z300H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-T337T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added LG Factory Repair via USB and JTAG interfaces (".tot", ".kdz" and ".dz" firmware versions are supported) - Added support for new type of KDZ firmware with ".dz" files inside - All pinouts and repair procedures described in the manual ("Help" button in the Software) Medusa - Ultimate Breakthrough in the Phone Repair! Download Medusa PRO Software v.1.1.5 Last edited by Medusa Box; 07-22-2016 at 15:13.

07-22-2016, 15:36	#4 (permalink)
shamsulhaq No Life Poster Join Date: Dec 2012 Location: india mumbai Posts: 1,214 Member: 1847344 Status: Offline Thanks Meter: 300	lg d380 dbi error fatal demi *** crash handler dbi error fatal board rev 1.1 ram dump mode xxxxxxxxx xxxxxxxxxxx xxxxxxxxxxxxx repaire medusa probox via usb cable please help

07-25-2016, 14:35	#13 (permalink)
wcelgsm Freak Poster Join Date: Feb 2008 Location: Brasil Posts: 328 Member: 694980 Status: Offline Thanks Meter: 91	Ingles Problem occurred while opening the new program Medusa Pro 1.1.4 the Box firmware update, and was not recognized more. Using previous versions worked normal after opening 1.1.4 no longer works on any version how can I solve this? Last edited by Medusa Box; 07-26-2016 at 06:49.

07-22-2016, 15:16	#2 (permalink)
szalim Insane Poster Join Date: Jun 2015 Location: Pakistan Age: 35 Posts: 73 Member: 2409570 Status: Offline Thanks Meter: 23	Good Job Team....Thanks

07-22-2016, 15:34	#3 (permalink)
bronce No Life Poster Join Date: Apr 2007 Location: Taguig CT Age: 42 Posts: 2,507 Member: 488875 Status: Offline Sonork: 100.1626294 Thanks Meter: 1,129	great update team. ps. hoping for more samsung j/a/g series to support soon.

07-22-2016, 15:46	#5 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,361 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Try to make Repair via eMMC.

07-22-2016, 17:18	#6 (permalink)
toninhosantos No Life Poster Join Date: Jun 2010 Location: Xique-Xique-Bahia, Brasil Age: 46 Posts: 906 Member: 1320000 Status: Offline Sonork: 100.1667898 Thanks Meter: 272	Add suport for boot repair samsung by md5 original firmware. Jtag and emmc. Thanks team.Good job.

07-23-2016, 05:01	#7 (permalink)
i-hack Freak Poster Join Date: Feb 2016 Location: globalworld Posts: 133 Member: 2532019 Status: Offline Thanks Meter: 20	hi, Is there a way can we use MEDUSA PRO for normal JTAG or only support DIRECT EMMC????

07-23-2016, 07:38	#8 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,361 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Yes, of course, You can use Medusa Pro Box also to work with JTAG.

07-23-2016, 08:13	#9 (permalink)
gyuriko01 Freak Poster Join Date: Nov 2008 Location: Magyarország Posts: 118 Member: 908095 Status: Offline Thanks Meter: 8	Very Good Update good job for good team

07-23-2016, 08:23	#10 (permalink)
jmr No Life Poster Join Date: Oct 2007 Location: Colombia Posts: 1,812 Member: 614683 Status: Offline Sonork: 100.1605379 Thanks Meter: 370	need dump for G6-U00 any user have

07-26-2016, 06:51	#14 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,361 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	@ wcelgsm Hello. Contact us to Skype, we will check remotely, where can be the problem with your Box.