Huawei SCL-L01 mpt file request [Updated] - GSM-Forum

NAVAKO · 05-15-2018, 07:13

Hi to all, have smart repaired huawei scl-l01 phone. Now need scl-l01 mpt file to write it. Anyone have mpt file for this phone? thanks.

Octopus box · 05-15-2018, 08:14

Hello.

If You have repaired your device through the Smart Repair operation, then please try to reflash your phone with stock firmware and check whether will it work. Also, please post here full Software log of Smart Repair operation.

NAVAKO · 05-15-2018, 08:45

Quote:

Originally Posted by Octopus box

Hello.

If You have repaired your device through the Smart Repair operation, then please try to reflash your phone with stock firmware and check whether will it work. Also, please post here full Software log of Smart Repair operation.

thia is log:

Welcome to Medusa Pro Software version 1.5.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1

Model Settings:
Interface : USB
Brand : Huawei
Model : SCL-L01
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/HUAWEI_SCL-L01_USB_MSM8909.srf
Core : Qualcomm MSM8909
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_009600E1
Core : Qualcomm MSM8909
Page size : 512 B
Block size : 512 B
Block count : 30785536
Size : 14.68 GB (15032.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00000022) 17 KB
P01: sbl1 (00000022, 00000400) 512 KB
P02: hyp (00000422, 00000400) 512 KB
P03: sec (00002000, 00000040) 32 KB
P04: DDR (00002040, 00000040) 32 KB
P05: rpm (00004000, 00000400) 512 KB
P06: tz (00004400, 00000400) 512 KB
P07: aboot (00004800, 00002780) 4.938 MB
P08: pad (00006F80, 00000800) 1024 KB
P09: oeminfo (00007780, 00020000) 64 MB
P10: misc (00027780, 00002000) 4 MB
P11: modemst1 (00029780, 00002000) 4 MB
P12: modemst2 (0002B780, 00002000) 4 MB
P13: fsg (0002E000, 00002000) 4 MB
P14: modem (00030000, 00064000) 200 MB
P15: fsc (00094000, 00000002) 1024 b
P16: ssd (00094002, 00000010) 8 KB
P17: log (00094012, 00020000) 64 MB
P18: persist (000B6000, 00004000) 8 MB
P19: boot (000BA000, 00020000) 64 MB
P20: recovery (000DA000, 00018000) 48 MB
P21: erecovery (000F2000, 00018000) 48 MB
P22: cache (0010A000, 00080000) 256 MB
P23: cust (0018A000, 00080000) 256 MB
P24: system (0020A000, 00380000) 1792 MB
P25: userdata (0058A000, 00905FDF) 4.512 GB
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/HUAWEI_SCL-L01_USB_MSM8909.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing hyp partition... Done.
Writing sec partition... Done.
Writing DDR partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing oeminfo partition... Done.
Writing misc partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing fsg partition... Done.
Writing modem partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing log partition... Done.
Writing persist partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing erecovery partition... Done.
Writing cache partition... Done.
Writing cust partition... Done.

Smart Repair is successfully complete.
SW: 1.5.5; FW: 1.23.
Disconnected.

Model Settings:
Interface : USB
Brand : Huawei
Model : SCL-L01
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/HUAWEI_SCL-L01_USB_MSM8909.srf
Core : Qualcomm MSM8909
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_009600E1
Core : Qualcomm MSM8909
Page size : 512 B
Block size : 512 B
Block count : 30785536
Size : 14.68 GB (15032.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00000022) 17 KB
P01: sbl1 (00000022, 00000400) 512 KB
P02: hyp (00000422, 00000400) 512 KB
P03: sec (00002000, 00000040) 32 KB
P04: DDR (00002040, 00000040) 32 KB
P05: rpm (00004000, 00000400) 512 KB
P06: tz (00004400, 00000400) 512 KB
P07: aboot (00004800, 00002780) 4.938 MB
P08: pad (00006F80, 00000800) 1024 KB
P09: oeminfo (00007780, 00020000) 64 MB
P10: misc (00027780, 00002000) 4 MB
P11: modemst1 (00029780, 00002000) 4 MB
P12: modemst2 (0002B780, 00002000) 4 MB
P13: fsg (0002E000, 00002000) 4 MB
P14: modem (00030000, 00064000) 200 MB
P15: fsc (00094000, 00000002) 1024 b
P16: ssd (00094002, 00000010) 8 KB
P17: log (00094012, 00020000) 64 MB
P18: persist (000B6000, 00004000) 8 MB
P19: boot (000BA000, 00020000) 64 MB
P20: recovery (000DA000, 00018000) 48 MB
P21: erecovery (000F2000, 00018000) 48 MB
P22: cache (0010A000, 00080000) 256 MB
P23: cust (0018A000, 00080000) 256 MB
P24: system (0020A000, 00380000) 1792 MB
P25: userdata (0058A000, 00905FDF) 4.512 GB

if try flash firmware, flash ok but phone stuck on huawei logo...

Medusa Box · 05-15-2018, 12:38

Quote:

if try flash firmware, flash ok but phone stuck on huawei logo...

Try to write another firmwares, maybe You have written not compatible firmware. Also device may stuck on Huawei loge because of HW problems.

Medusa Box · 05-15-2018, 14:04

Also we have uploaded Full flash for this device into the Support Area. You can download it via "Download *.srf" button in Software and try to write it.

NAVAKO · 05-16-2018, 08:22

Quote:

Originally Posted by Medusa Box

Also we have uploaded Full flash for this device into the Support Area. You can download it via "Download *.srf" button in Software and try to write it.

have downloaded file from download section, this is .bin file can't flash by usb, need unsolder emmc?

Medusa Box · 05-16-2018, 09:08

Quote:

this is .bin file can't flash by usb

What is the problem with writing this file? Connect the device, select "Full flash" option in Software, press "Write" button, select file and write it.

05-15-2018, 07:13	#1 (permalink)
NAVAKO Freak Poster Join Date: Jan 2010 Posts: 286 Member: 1206897 Status: Offline Sonork: Aleandros Thanks Meter: 34	Huawei SCL-L01 mpt file request [Updated] Hi to all, have smart repaired huawei scl-l01 phone. Now need scl-l01 mpt file to write it. Anyone have mpt file for this phone? thanks. Last edited by Octopus box; 05-15-2018 at 14:03.

05-15-2018, 08:14	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,846 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Hello. If You have repaired your device through the Smart Repair operation, then please try to reflash your phone with stock firmware and check whether will it work. Also, please post here full Software log of Smart Repair operation.

05-15-2018, 14:04	#5 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Also we have uploaded Full flash for this device into the Support Area. You can download it via "Download *.srf" button in Software and try to write it.