Moto G XT1033 unbrick successfully Done

[Niaz Hussain]

Moto G XT1033 hard bricked Device
Shows only Qualcomm 9008 unbrick Done by Changing new eMMC and device Repair done

Welcome to Medusa Pro Software version 1.5.0. 
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Toshiba eMMC 016G92
Page size    : 512 B
Block size   : 512 B
Block count  : 30777344
Size         : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 1101003031364739320114882D708051
Manufacturer ID       : 0X11
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : 016G92
Product revision      : 0.1
Product serial number : (hex) 14882D70
Manufacturing date    : 08/2013
---------------------------------------------------------------
CSD Info

CSD                   : D00E00320F5903FFFFFFFFEF92400045
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size      : 4096 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 512 Kbytes

Partition config      : (0x38) 00111000
Boot partition enable : User area (Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/016G92_18_01_2018_21_48_17.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.0; FW: 1.22.
P00: GPT              (00000000, 00000100)	128 KB
P01: modem            (00000100, 00020000)	64 MB
P02: sbl1             (00020100, 00000400)	512 KB
P03: DDR              (00020500, 00000040)	32 KB
P04: aboot            (00020600, 00000400)	512 KB
P05: rpm              (000211B8, 00000190)	200 KB
P06: tz               (000215A0, 00000320)	400 KB
P07: sdi              (00021988, 00000040)	32 KB
P08: utags            (000219C8, 00000400)	512 KB
P09: logs             (00021DC8, 00001000)	2048 KB
P10: padA             (00022DC8, 00001238)	2332 KB
P11: abootBackup      (00024000, 00000400)	512 KB
P12: rpmBackup        (00024BB8, 00000190)	200 KB
P13: tzBackup         (00024FA0, 00000320)	400 KB
P14: sdiBackup        (00025388, 00000040)	32 KB
P15: utagsBackup      (000253C8, 00000400)	512 KB
P16: padB             (000257C8, 00000838)	1052 KB
P17: modemst1         (00026000, 00000C00)	1536 KB
P18: modemst2         (00026C00, 00000C00)	1536 KB
P19: hob              (00027800, 00000400)	512 KB
P20: dhob             (00027C00, 00000010)	8 KB
P21: fsg              (00027D00, 00000C00)	1536 KB
P22: fsc              (00028900, 00000002)	1024 b
P23: ssd              (00028902, 00000010)	8 KB
P24: sp               (00028912, 00000800)	1024 KB
P25: cid              (00029112, 00000100)	128 KB
P26: pds              (00029212, 00001800)	3072 KB
P27: logo             (0002AA12, 00002000)	4 MB
P28: clogo            (0002CA12, 00002000)	4 MB
P29: persist          (0002EB00, 00004000)	8 MB
P30: misc             (00032B00, 00000400)	512 KB
P31: boot             (00032F00, 00005000)	10 MB
P32: recovery         (00037F00, 00005000)	10 MB
P33: cache            (0003CF00, 0014B100)	662.1 MB
P34: system           (00188000, 001E8000)	976 MB
P35: kpan             (00370000, 00004000)	8 MB
P36: userdata         (00374000, 019E5F00)	12.95 GB
Backuping Gpt partition... 
Opening C:/Program Files/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_18_01_2018_21_48_17.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 1.5.0; FW: 1.22.
Backuping Cid partition... 
Opening C:/Program Files/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_18_01_2018_21_48_17.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 1.5.0; FW: 1.22.
Selected file: G:/Moto/XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem...	Done.
Writing partition sbl1...	Done.
Writing partition aboot...	Done.
Writing partition rpm...	Done.
Writing partition tz...	Done.
Writing partition sdi...	Done.
Erasing partition modemst1...	Done.
Erasing partition modemst2...	Done.
Writing partition fsg...	Done.
Writing partition logo...	Done.
Writing partition boot...	Done.
Writing partition recovery...	Done.
Erasing partition cache...	Done.
Writing partition system (4 parts):
Writing from file G:/Moto/XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12_CFC.xml/system.img_sparsechunk.0 (1/4)...	Done
Writing from file G:/Moto/XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12_CFC.xml/system.img_sparsechunk.1 (2/4)...	Done
Writing from file G:/Moto/XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12_CFC.xml/system.img_sparsechunk.2 (3/4)...	Done
Writing from file G:/Moto/XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12_CFC.xml/system.img_sparsechunk.3 (4/4)...	Done
Writing partition system...	Done.
Erasing partition userdata...	Done.
Writing is finished.
SW: 1.5.0; FW: 1.22.