Moto XT1080 dead Repair Done

[maanarman]

Welcome to Medusa Pro Software version 1.5.2. 
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Toshiba eMMC 016G92
Page size    : 512 B
Block size   : 512 B
Block count  : 30777344
Size         : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 110100303136473932011E4F629C314F
Manufacturer ID       : 0X11
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : 016G92
Product revision      : 0.1
Product serial number : (hex) 1E4F629C
Manufacturing date    : 03/2014
---------------------------------------------------------------
CSD Info

CSD                   : D00E00320F5903FFFFFFFFEF92400045
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size      : 4096 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 512 Kbytes

Partition config      : (0x38) 00111000
Boot partition enable : User area (Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/016G92_21_01_2018_21_29_56.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.2; FW: 1.22.
P00: GPT              (00000000, 00000100)	128 KB
P01: modem            (00000100, 00032000)	100 MB
P02: sbl1             (00032100, 00000BB8)	1500 KB
P03: sbl2             (00032CB8, 00000BB8)	1500 KB
P04: sbl3             (00033870, 00000404)	514 KB
P05: aboot            (00034870, 00000400)	512 KB
P06: rpm              (00035428, 0000011C)	142 KB
P07: tz               (00035810, 000001A4)	210 KB
P08: utags            (00035BF8, 00000400)	512 KB
P09: logs             (00035FF8, 00000800)	1024 KB
P10: padA             (000367F8, 00001808)	3076 KB
P11: sbl2Backup       (00038000, 00000BB8)	1500 KB
P12: sbl3Backup       (00038BB8, 00001000)	2048 KB
P13: abootBackup      (00039BB8, 00000BB8)	1500 KB
P14: rpmBackup        (0003A770, 000003E8)	500 KB
P15: tzBackup         (0003AB58, 000003E8)	500 KB
P16: utagsBackup      (0003AF40, 00000400)	512 KB
P17: padB             (0003B340, 00000CC0)	1632 KB
P18: modemst1         (0003C000, 00001800)	3072 KB
P19: modemst2         (0003D800, 00001800)	3072 KB
P20: mbl              (0003F000, 00001000)	2048 KB
P21: hob              (00040000, 00000500)	640 KB
P22: dhob             (00040500, 00000010)	8 KB
P23: persist          (00040600, 00004000)	8 MB
P24: ssd              (00044600, 00000010)	8 KB
P25: fsg              (00044610, 00001800)	3072 KB
P26: sp               (00045E10, 00000800)	1024 KB
P27: misc             (00046610, 00000400)	512 KB
P28: pds              (00046A10, 00001800)	3072 KB
P29: cid              (00048210, 00000100)	128 KB
P30: logo             (00048310, 00002000)	4 MB
P31: clogo            (0004A310, 00002000)	4 MB
P32: devtree          (0004C310, 00000800)	1024 KB
P33: boot             (0004CC00, 00005000)	10 MB
P34: recovery         (00051C00, 00005000)	10 MB
P35: kpan             (00056C00, 00004000)	8 MB
P36: cache            (0005AC00, 002BCC00)	1402 MB
P37: padC             (00317800, 00000800)	1024 KB
P38: system           (00318000, 00420000)	2112 MB
P39: customize        (00738000, 00008000)	16 MB
P40: userdata         (00740000, 01611F00)	11.04 GB
Backuping Gpt partition... 
Opening C:/Program Files/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_21_01_2018_21_29_56.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 1.5.2; FW: 1.22.
Backuping Cid partition... 
Opening C:/Program Files/Medusa Pro Software/Backups/016G92_Cid_0x48210_0x100_21_01_2018_21_29_56.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 1.5.2; FW: 1.22.
Selected file: D:/China New/BEST/MOTO/XT1080 CFC_obake_verizon-user-4.4.4-SU6-7.7-release-keys.xml/CFC_obake_verizon-user-4.4.4-SU6-7.7-release-keys.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem...	Done.
Writing partition sbl1...	Done.
Writing partition sbl2...	Done.
Writing partition sbl3...	Done.
Writing partition aboot...	Done.
Writing partition rpm...	Done.
Writing partition tz...	Done.
Erasing partition modemst1...	Done.
Erasing partition modemst2...	Done.
Writing partition fsg...	Done.
Writing partition logo...	Done.
Erasing partition clogo...	Done.
Writing partition boot...	Done.
Writing partition recovery...	Done.
Erasing partition cache...	Done.
Erasing partition customize...	Done.
Writing is finished.
SW: 1.5.2; FW: 1.22.