Motorola G5 Cedric XT1676 dead boot repair question [Answered]

[maliro2012]

Hi .
I need help to repair dead boot Motorola Cedric G5 xt1676
Device was running security patch March 2018
I flashed wrong bootloader.img after reboot device is only blinking led and only qualcomm driver detected

I need your help with emmc pinout and steps to repair this new device with Medusa ...

[Medusa Box]

Hello.

I need your help with emmc pinout and steps to repair this new device

eMMC ISP pinout picture is inside of SRF (Smart Repair File).

To repair Motorola XT1676, do the following:

1. Install the latest version of Medusa Pro Software (http://medusabox.com/eng/download/software).
2. Download and install SRF for Motorola XT1676 "MOTOROLA_XT1676_EMMC.srf" from the Support Area (via "Download *.srf" button in Software).
3. Select "eMMC" option in Software.
4. Select Motorola XT1676 in Software's list (model will appear in Software's list after SRF installation).
5. Solder all necessary eMMC wires accordingly to Software manual ("Help" or "Pinout" button in Software).
6. Press "Connect" button in Software.
7. When device will be connected successfully, do "Smart Repair" ("Smart repair" tab in Software).
8. Post here the result.

Also please make backup (read Full flash) before to do repairing.

[maliro2012]

Thanks for your response I'll give feedback once I'm done ...