Motorola XT1626 error?! [Answered] - GSM-Forum

camilo_lima21 · 09-10-2018, 04:31

Recording failed

Medusa Box · 09-10-2018, 08:50

Hello.

Please, post here full Software log of Connect operation, we will check it.

camilo_lima21 · 09-10-2018, 14:33

Quote:

Originally Posted by Medusa Box

Hello.

Please, post here full Software log of Connect operation, we will check it.

Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100514531334D42075A10D6AC4347
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.7
Product serial number : (hex) 5A10D6AC
Manufacturing date : 04/2016
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QE13MB_10_09_2018_10_33_13.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: fsc (00032100, 00000002) 1024 b
P03: ssd (00032102, 00000010) 8 KB
P04: sbl1 (00032112, 00000400) 512 KB
P05: sbl1bak (00032512, 00000400) 512 KB
P06: rpm (00032912, 000001B0) 216 KB
P07: rpmbak (00032D12, 000001B0) 216 KB
P08: tz (00033112, 00000718) 908 KB
P09: tzbak (00033D12, 00000718) 908 KB
P10: hyp (00034912, 000000C0) 96 KB
P11: hypbak (00034D12, 000000C0) 96 KB
P12: dsp (00035112, 00008000) 16 MB
P13: modemst1 (0003D112, 00001000) 2048 KB
P14: modemst2 (0003E112, 00001000) 2048 KB
P15: DDR (0003F200, 00000040) 32 KB
P16: fsg (0003F240, 00004000) 8 MB
P17: sec (00043240, 00000020) 16 KB
P18: aboot (00043300, 00000BB8) 1500 KB
P19: abootbak (00043F00, 00000BB8) 1500 KB
P20: logs (00044B00, 00001000) 2048 KB
P21: utags (00045B00, 00000400) 512 KB
P22: utagsBackup (00045F00, 00000400) 512 KB
P23: cid (00046300, 00000100) 128 KB
P24: logo (00046400, 00008000) 16 MB
P25: clogo (0004E400, 00008000) 16 MB
P26: metadata (00056400, 00000400) 512 KB
P27: kpan (00056800, 00004000) 8 MB
P28: boot (0005A800, 00008000) 16 MB
P29: recovery (00062800, 000080C8) 16.1 MB
P30: persist (0006A900, 00010000) 32 MB
P31: misc (0007A900, 00000800) 1024 KB
P32: config (0007B100, 00000040) 32 KB
P33: limits (0007B200, 00000040) 32 KB
P34: mota (0007B300, 00000800) 1024 KB
P35: devcfg (0007BB00, 00000200) 256 KB
P36: dip (0007BD00, 00000800) 1024 KB
P37: syscfg (0007C500, 00000400) 512 KB
P38: cmnlib (0007C900, 00000188) 196 KB
P39: keymaster (0007CB00, 000001B8) 220 KB
P40: frp (0007CD00, 00000400) 512 KB
P41: padC (0007D100, 0000AF00) 21.88 MB
P42: sp (00088000, 00004000) 8 MB
P43: hw (0008C000, 00004000) 8 MB
P44: customize (00090000, 00010000) 32 MB
P45: oem (000A0000, 00148000) 656 MB
P46: cache (001E8000, 00080000) 256 MB
P47: system (00268000, 00500000) 2560 MB
P48: userdata (00768000, 015B6F00) 10.86 GB
Backuping Gpt partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QE13MB_Gpt_0x0_0x100_10_09_2018_10_33_13.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QE13MB_Cid_0x46300_0x100_10_09_2018_10_33_13.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.

Medusa Box · 09-10-2018, 15:01

We will research where can be the problem and try to find solution for your issue.

09-10-2018, 04:31	#1 (permalink)
camilo_lima21 Insane Poster Join Date: Nov 2006 Location: Goiás - Brasil Age: 39 Posts: 93 Member: 397772 Status: Offline Sonork: 5561995554600 Thanks Meter: 97	Motorola XT1626 error?! [Answered] Recording failed

09-10-2018, 08:50	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,397	Hello. Please, post here full Software log of Connect operation, we will check it.

09-10-2018, 15:01	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,397	We will research where can be the problem and try to find solution for your issue.