Redmi Note 4x Restart Problem, Boot Loop Successfully Solved By Medusa Pro

[tapas770]

Welcome to Medusa Pro Software version 1.6.0.  Started.
 Reader #0: FT SCR2000 0
 Reader #1: FT SCR2000 1
 Reader #2: Generic EMV Smartcard Reader 0
 Reader #3: Generic EMV Smartcard Reader 1
 

 Model Settings:
 Interface : USB
 Brand     : Xiaomi
 Model     : Note_4X
 SRF       : C:/Program Files/Medusa Pro Software/firmwareFolder/XIAOMI_NOTE 4X_USB.srf
 Core      : Qualcomm MSM8953
 Loader    : QLoader_v6_Xiaomi
 

 Connecting...
 Sending loader...OK.
 Loader successfully initialized.
 

 Device       : CoreID_000460E1
 Core         : Qualcomm MSM8953
 Page size    : 512 B
 Block size   : 512 B
 Block count  : 61071360
 Size         : 29.12 GB (29820.00 MB)
 Connect successful.
 ---------------------------------------------------------------
 SW: 1.6.0; FW: 1.23.
 P00: GPT              (00000000, 00020000)	64 MB
 P01: modem            (00020000, 0002A000)	84 MB
 P02: fsc              (00060000, 00000002)	1024 b
 P03: ssd              (00060002, 00000010)	8 KB
 P04: sbl1             (00060012, 00000400)	512 KB
 P05: sbl1bak          (00060412, 00000400)	512 KB
 P06: rpm              (00060812, 00000400)	512 KB
 P07: rpmbak           (00060C12, 00000400)	512 KB
 P08: tz               (00061012, 00001000)	2048 KB
 P09: tzbak            (00062012, 00001000)	2048 KB
 P10: devcfg           (00063012, 00000200)	256 KB
 P11: devcfgbak        (00063212, 00000200)	256 KB
 P12: dsp              (00063412, 00008000)	16 MB
 P13: modemst1         (0006B412, 00000C00)	1536 KB
 P14: modemst2         (0006C012, 00000C00)	1536 KB
 P15: DDR              (00080000, 00000040)	32 KB
 P16: fsg              (00080040, 00000C00)	1536 KB
 P17: sec              (00080C40, 00000020)	16 KB
 P18: splash           (000A0000, 00005800)	11 MB
 P19: aboot            (000C0000, 00000800)	1024 KB
 P20: abootbak         (000C0800, 00000800)	1024 KB
 P21: boot             (000C1000, 00020000)	64 MB
 P22: recovery         (000E1000, 00020000)	64 MB
 P23: devinfo          (00101000, 00000800)	1024 KB
 P24: system           (00101800, 00600000)	3072 MB
 P25: cache            (00720000, 00080000)	256 MB
 P26: persist          (007A0000, 00010000)	32 MB
 P27: misc             (007B0000, 00000800)	1024 KB
 P28: keystore         (007B0800, 00000400)	512 KB
 P29: config           (007B0C00, 00000040)	32 KB
 P30: oem              (007B0C40, 00080000)	256 MB
 P31: limits           (00840000, 00000040)	32 KB
 P32: mota             (00860000, 00000400)	512 KB
 P33: dip              (00860400, 00000800)	1024 KB
 P34: mdtp             (00860C00, 00010000)	32 MB
 P35: syscfg           (00870C00, 00000400)	512 KB
 P36: mcfg             (00871000, 00002000)	4 MB
 P37: lksecapp         (00880000, 00000100)	128 KB
 P38: lksecappbak      (00880100, 00000100)	128 KB
 P39: cmnlib           (00880200, 00000200)	256 KB
 P40: cmnlibbak        (00880400, 00000200)	256 KB
 P41: cmnlib64         (00880600, 00000200)	256 KB
 P42: cmnlib64bak      (00880800, 00000200)	256 KB
 P43: keymaster        (00880A00, 00000200)	256 KB
 P44: keymasterbak     (00880C00, 00000200)	256 KB
 P45: apdp             (008A0000, 00000200)	256 KB
 P46: msadp            (008A0200, 00000200)	256 KB
 P47: dpo              (008A0400, 00000010)	8 KB
 P48: cust             (008A0410, 001A0000)	832 MB
 P49: userdata         (00A40410, 02FFDBCF)	24 GB
 Partition table has been found on device.

Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/XIAOMI_NOTE 4X_USB.srf". Write data verification is enabled.
 Writing GPT partition...	Done.
 Writing modem partition...	Done.
 Writing fsc partition...	Done.
 Writing ssd partition...	Done.
 Writing sbl1 partition...	Done.
 Writing sbl1bak partition...	Done.
 Writing rpm partition...	Done.
 Writing rpmbak partition...	Done.
 Writing tz partition...	Done.
 Writing tzbak partition...	Done.
 Writing devcfg partition...	Done.
 Writing devcfgbak partition...	Done.
 Writing dsp partition...	Done.
 Writing DDR partition...	Done.
 Writing fsg partition...	Done.
 Writing sec partition...	Done.
 Writing splash partition...	Done.
 Writing aboot partition...	Done.
 Writing abootbak partition...	Done.
 Writing boot partition...	Done.
 Writing recovery partition...	Done.
 Writing devinfo partition...	Done.
 Writing persist partition...	Done.
 Writing misc partition...	Done.
 Writing keystore partition...	Done.
 Writing config partition...	Done.
 Writing oem partition...	Done.
 Writing limits partition...	Done.
 Writing mota partition...	Done.
 Writing dip partition...	Done.
 Writing mdtp partition...	Done.
 Writing syscfg partition...	Done.
 Writing mcfg partition...	Done.
 Writing lksecapp partition...	Done.
 Writing lksecappbak partition...	Done.
 Writing cmnlib partition...	Done.
 Writing cmnlibbak partition...	Done.
 Writing cmnlib64 partition...	Done.
 Writing cmnlib64bak partition...	Done.
 Writing keymaster partition...	Done.
 Writing keymasterbak partition...	Done.
 Writing apdp partition...	Done.
 Writing msadp partition...	Done.
 Writing dpo partition...	Done.
 Writing cust partition...	Done.
 

 Smart Repair is successfully complete.
 SW: 1.6.0; FW: 1.23.
 Disconnected.
 

Thanks Medusa...