Samsung SM-G935A repair problem [Solved]

[chliki2001]

I have on hand a samsung s7 g935a with sbl error upload cant enter download mode or recovery
and in last update u do repaire samsung for s7 g935v with srf file on support
my question is if i can repair my g935a with this g935v srf file
thanks in advance
coz i connect it with Qualcomm MSM8996 UFS QLoader_v4_Samsung it connect fine

[chliki2001]

Welcome to Medusa Pro Software version 1.5.7.
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0

Model Settings:
Interface : USB
Core : Qualcomm MSM8996 UFS
Loader : QLoader_v4_Samsung

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device Total Logical Blocks: 0x76f000
Device Block Size in Bytes: 0x1000
Device Total Physical Paritions: 0x4
Device Manufacturer ID: 0x1ce
Device Serial Number: 0x0
UFS fInitialized: 0x1
UFS Current LUN Number: = 0xd0
UFS Total Active LU: 0x4
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS Raw Device Capacity: = 0x3b9e000
UFS Min Block Size: 0x8
UFS Erase Block Size: 0x2000
UFS Allocation Unit Size: 0x1
UFS RPMB ReadWrite Size: = 0x20
UFS Number of Allocation Uint for This LU: 0x0
UFS Logical Block Size: 0x0
UFS Provisioning Type: 0x0
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS dEnhanced1MaxNAllocU: 0x1dcf
UFS wEnhanced1CapAdjFac: 0x200
UFS dEnhanced2MaxNAllocU: = 0x0
UFS wEnhanced2CapAdjFac: 0x200
UFS dEnhanced3MaxNAllocU: 0x0
UFS wEnhanced3CapAdjFac: 0x200
UFS dEnhanced4MaxNAllocU: 0x0
UFS wEnhanced4CapAdjFac: 0x0
UFS LUN Enable Bitmask: 0xf
UFS Logical Block Count: 0x0
UFS bConfigDescrLock: 0x1
UFS iManufacturerName String Index: 0x0
UFS iProductName String Index: 0x1
UFS iSerialNumber String Index: 0x2
UFS iOemID String Index: 0x3
UFS Inquiry Command Output: SAMSUNG KLUBG4G1CE-B0B1 0009
ACK
Device : SAMSUNG KLUBG4G1CE-B0B1 0009
Core : Qualcomm MSM8996 UFS
Page size : 4096 B
Block size : 4096 B
Block count : 7812096
Size : 29.80 GB (30516.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.5.7; FW: 1.1.0.

Physical partition number: 0

Block count : 7794688 (0x76F000)
Size : 29.73 GB (30448.00 MB)
P00: GPT (00000000, 00000108) 1056 KB
P01: modemst1 (00000108, 00000180) 1536 KB
P02: modemst2 (00000288, 00000180) 1536 KB
P03: fsc (00000408, 00000001) 4 KB
P04: ssd (00000409, 00000002) 8 KB
P05: persist (0000040B, 00002000) 32 MB
P06: efs (0000240B, 00001400) 20 MB
P07: param (0000380B, 00000A00) 10 MB
P08: misc (0000420B, 00000100) 1024 KB
P09: keystore (0000430B, 00000080) 512 KB
P10: devcfg (0000438B, 00000020) 128 KB
P11: frp (000043AB, 00000080) 512 KB
P12: bota (0000442B, 00000C00) 12 MB
P13: fota (0000502B, 00000400) 4 MB
P14: persistent (0000542B, 00000100) 1024 KB
P15: apnhlos (0000552B, 00005F00) 95 MB
P16: modem (0000B42B, 00005500) 85 MB
P17: boot (0001092B, 00004C00) 76 MB
P18: recovery (0001552B, 00004C00) 76 MB
P19: persdata (0001A12B, 00000900) 9 MB
P20: system (0001AA2B, 0012C000) 4.688 GB
P21: cache (00146A2B, 00040000) 1024 MB
P22: userdata (00186A2B, 005E85D0) 23.63 GB

Physical partition number: 1

Block count : 1024 (0x400)
Size : 4.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl (00000006, 00000300) 3072 KB

Physical partition number: 2

Block count : 1024 (0x400)
Size : 4.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl (00000006, 00000300) 3072 KB

Physical partition number: 3

Block count : 15360 (0x3C00)
Size : 60.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: rpm (00000006, 00000080) 512 KB
P02: tz (00000086, 00000200) 2048 KB
P03: hyp (00000286, 00000080) 512 KB
P04: fsg (00000306, 00000180) 1536 KB
P05: sec (00000486, 00000004) 16 KB
P06: pmic (0000048A, 00000080) 512 KB
P07: dsp (0000050A, 00001000) 16 MB
P08: dip (0000150A, 00000100) 1024 KB
P09: mdtp (0000160A, 00002000) 32 MB
P10: aboot (0000360A, 00000200) 2048 KB
P11: devinfo (0000380A, 00000001) 4 KB
P12: bluetooth (0000380B, 00000100) 1024 KB
P13: lksecapp (0000390B, 00000060) 384 KB
P14: keymaster (0000396B, 00000040) 256 KB
P15: cmnlib (000039AB, 00000040) 256 KB
P16: cmnlib64 (000039EB, 00000040) 256 KB
P17: apdp (00003A2B, 00000020) 128 KB
P18: msadp (00003A4B, 00000020) 128 KB
P19: dpo (00003A6B, 00000001) 4 KB
P20: ddr (00003A6C, 00000100) 1024 KB
P21: pad (00003B6C, 0000008F) 572 KB
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G935V_USB_UFS.SRF".
Write data verification is enabled.

Physical partition number: 0
Writing GPT partition... Done.

Physical partition number: 0
Writing fsc partition... Done.

Physical partition number: 0
Writing ssd partition... Done.

Physical partition number: 0
Writing persist partition... Done.

Physical partition number: 0
Writing param partition... Done.

Physical partition number: 0
Writing misc partition... Done.

Physical partition number: 0
Writing keystore partition... Done.

Physical partition number: 0
Writing devcfg partition... Done.

Physical partition number: 0
Writing frp partition... Done.

Physical partition number: 0
Writing bota partition... Done.

Physical partition number: 0
Writing fota partition... Done.

Physical partition number: 0
Writing persistent partition... Done.

Physical partition number: 0
Writing apnhlos partition... Done.

Physical partition number: 0
Writing modem partition... Done.

Physical partition number: 0
Writing boot partition... Done.

Physical partition number: 0
Writing recovery partition... Done.

Physical partition number: 0
Writing persdata partition... Done.

Physical partition number: 0
Writing carrier partition... Done.

Physical partition number: 1
Writing GPT partition... Done.

Physical partition number: 1
Writing xbl partition... Done.

Physical partition number: 2
Writing GPT partition... Done.

Physical partition number: 2
Writing xbl partition... Done.

Physical partition number: 3
Writing GPT partition... Done.

Physical partition number: 3
Writing rpm partition... Done.

Physical partition number: 3
Writing tz partition... Done.

Physical partition number: 3
Writing hyp partition... Done.

Physical partition number: 3
Writing sec partition... Done.

Physical partition number: 3
Writing pmic partition... Done.

Physical partition number: 3
Writing dsp partition... Done.

Physical partition number: 3
Writing dip partition... Done.

Physical partition number: 3
Writing mdtp partition... Done.

Physical partition number: 3
Writing aboot partition... Done.

Physical partition number: 3
Writing devinfo partition... Done.

Physical partition number: 3
Writing bluetooth partition... Done.

Physical partition number: 3
Writing lksecapp partition... Done.

Physical partition number: 3
Writing keymaster partition... Done.

Physical partition number: 3
Writing cmnlib partition... Done.

Physical partition number: 3
Writing cmnlib64 partition... Done.

Physical partition number: 3
Writing apdp partition... Done.

Physical partition number: 3
Writing msadp partition... Done.

Physical partition number: 3
Writing dpo partition... Done.

Physical partition number: 3
Writing ddr partition... Done.

Physical partition number: 3
Writing pad partition... Done.

Smart Repair is successfully complete.
SW: 1.5.7; FW: 1.1.0.
Disconnected.

Model Settings:
Interface : USB
Core : Qualcomm MSM8996 UFS
Loader : QLoader_v4_Samsung

phone stay on qualcom

[chliki2001]

I solved problem boot for g935A THANKS TO ALL MEMBER

[tremontCellphon]

i tried the same way but my sm-g935a still dead boot any other solution??

[Medusa Box]

Originally Posted by tremontCellphon

i tried the same way but my sm-g935a still dead boot any other solution??

Post here full Software log with all of perfomed operations with the device, we wil check it.

Also read and always follow these rules:
http://forum.gsmhosting.com/vbb/f664...leted-2165828/,
http://forum.gsmhosting.com/vbb/f62/...rules-1591101/.