Sony ericsson x8, repaired yet not detected - GSM-Forum

gastonlopez.t · 01-29-2012, 21:13

Good afternoon everyone, I am writing from Argentina. I recently purchased the excellent product to boot solutions. And I have a problem, I connected a Sony Ericsson X8 (E15a). I have not had problems successfully repair the boot sector, but then when I connect it to proceed to flash the PC still does not detect it. Arrow back and the USB plug with the battery attached.

I thought it would solve that problem, what else could it be?

I await your prompt response,
Thank you.

Saulcell · 01-29-2012, 22:37

hi friend

1. erase boot only
2. repair boot again
3. flash phone

post result

gastonlopez.t · 01-29-2012, 22:51

I have, but not yet connected to the PC flash mode.

Medusa Box · 01-30-2012, 07:18

Please try to do the next:
1. Connect the phone in Advanced Mode and make Erase of full flash.
2. Connect the phone in EasyRepair Mode and make Repair of the device again.
3. After successful Repair try to write firmware again.

Post here full software log with all of your actions.

gastonlopez.t · 01-30-2012, 11:15

Great, i did all the steps before writing from Medusa a new firmware. I thought that was the soultion but i couldn't find a FIRMWARE to write from MEDUSA ( .bin or .(medusa file) ).

I got Medusa Box for Octopus owners, i couln't find firmware from BootLoader, where can i download a Firmware in spanish for Medusa for this model? Thanks a lot.

Medusa Box · 01-30-2012, 12:06

All firmware You can find here: https://www.boot-loader.com/eng/medusa_free_section.
Also note: to write firmware You need to use Medusa Flasher (not Medusa Box software).

gastonlopez.t · 01-30-2012, 12:17

I just can see repair files in that website. I mean firmware files. With Medusa Flasher is not same = i need to put in USB mode? Cause if is like that, i tried:
1. Connect the phone in Advanced Mode and make Erase of full flash.
2. Connect the phone in EasyRepair Mode and make Repair of the device again.

And didn't get flash mode at all neither.

Medusa Box · 01-30-2012, 12:57

You can use firmware for E15I, please look carefully here: https://www.boot-loader.com/eng/medusa_free_section.

gastonlopez.t · 01-30-2012, 18:47

Great! I didn't know for E15A i could use E15I firmware. Thanks a lot, i will try and write results. Thanks again.

gastonlopez.t · 01-31-2012, 04:05

GREATTT!!!! IT WORKED GREAT!!! THANK YOU VERY MUCH MEDUSA TEAM! I GOT THE PHONE WORKING FULL. I DID THIS:
1. Connect the phone in Advanced Mode and make Erase of full flash.
2. Connect the phone in EasyRepair Mode and make Repair of the device again.
3. After successful Repair try to write firmware again.

FOR E15A I DOWNLOAD THIS: E15i_1_3_A_0_50_CLARO_GT.oct FROM MEDUSA SUPPORT.

I FLASHED WITH: Medusa Flasher, THE COMPUTER DETECTS FLASH MODE.

AT FIRST CONECTED THEN DISCONECTED, BUT... I CONECTED THROUGHT UPDATER FROM SONY THEN I TAKED CONECTED PERMANTENLY. THEN I DISSCONECT FROM COMPUTER AND CONECT AND FLASH WITH Medusa Flasher AND WORKS GREAT!!

MEDUSA BOX RULES!!! THANKS FROM ARGENTINA.

01-29-2012, 21:13	#1 (permalink)
gastonlopez.t Freak Poster Join Date: Dec 2010 Posts: 163 Member: 1463928 Status: Offline Thanks: 22 Thanked 6 Times in 5 Posts	Sony ericsson x8, repaired yet not detected Good afternoon everyone, I am writing from Argentina. I recently purchased the excellent product to boot solutions. And I have a problem, I connected a Sony Ericsson X8 (E15a). I have not had problems successfully repair the boot sector, but then when I connect it to proceed to flash the PC still does not detect it. Arrow back and the USB plug with the battery attached. I thought it would solve that problem, what else could it be? I await your prompt response, Thank you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	5	04-10-2013 02:07
winlock wintesla m2bus do not work	Bigbrothers2000	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	01-26-2000 13:31
NEW ERICSSON A1018 £60 SIEMANS C25 £60 + LOADS MORE	MILLENNIUM-INTERNATIONAL	Main Sales Section	0	08-31-1999 18:54
"Deskey Device driver not found" ?? Please help	DivAdonis	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	06-28-1999 14:56
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	1	06-02-1999 16:23

01-29-2012, 22:37	#2 (permalink)
Saulcell No Life Poster Join Date: May 2006 Location: The_Colombian_Team ! Posts: 602 Member: 278939 Status: Offline Sonork: 100.1593095 Thanks: 317 Thanked 305 Times in 135 Posts	hi friend 1. erase boot only 2. repair boot again 3. flash phone post result

01-29-2012, 22:51	#3 (permalink)
gastonlopez.t Freak Poster Join Date: Dec 2010 Posts: 163 Member: 1463928 Status: Offline Thanks: 22 Thanked 6 Times in 5 Posts	I have, but not yet connected to the PC flash mode.

01-30-2012, 07:18	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Please try to do the next: 1. Connect the phone in Advanced Mode and make Erase of full flash. 2. Connect the phone in EasyRepair Mode and make Repair of the device again. 3. After successful Repair try to write firmware again. Post here full software log with all of your actions.

01-30-2012, 11:15	#5 (permalink)
gastonlopez.t Freak Poster Join Date: Dec 2010 Posts: 163 Member: 1463928 Status: Offline Thanks: 22 Thanked 6 Times in 5 Posts	Great, i did all the steps before writing from Medusa a new firmware. I thought that was the soultion but i couldn't find a FIRMWARE to write from MEDUSA ( .bin or .(medusa file) ). I got Medusa Box for Octopus owners, i couln't find firmware from BootLoader, where can i download a Firmware in spanish for Medusa for this model? Thanks a lot.

01-30-2012, 12:06	#6 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	All firmware You can find here: https://www.boot-loader.com/eng/medusa_free_section. Also note: to write firmware You need to use Medusa Flasher (not Medusa Box software).

01-30-2012, 12:17	#7 (permalink)
gastonlopez.t Freak Poster Join Date: Dec 2010 Posts: 163 Member: 1463928 Status: Offline Thanks: 22 Thanked 6 Times in 5 Posts	I just can see repair files in that website. I mean firmware files. With Medusa Flasher is not same = i need to put in USB mode? Cause if is like that, i tried: 1. Connect the phone in Advanced Mode and make Erase of full flash. 2. Connect the phone in EasyRepair Mode and make Repair of the device again. And didn't get flash mode at all neither.

01-30-2012, 12:57	#8 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	You can use firmware for E15I, please look carefully here: https://www.boot-loader.com/eng/medusa_free_section.

01-30-2012, 18:47	#9 (permalink)
gastonlopez.t Freak Poster Join Date: Dec 2010 Posts: 163 Member: 1463928 Status: Offline Thanks: 22 Thanked 6 Times in 5 Posts	Great! I didn't know for E15A i could use E15I firmware. Thanks a lot, i will try and write results. Thanks again.

01-31-2012, 04:05	#10 (permalink)
gastonlopez.t Freak Poster Join Date: Dec 2010 Posts: 163 Member: 1463928 Status: Offline Thanks: 22 Thanked 6 Times in 5 Posts	GREATTT!!!! IT WORKED GREAT!!! THANK YOU VERY MUCH MEDUSA TEAM! I GOT THE PHONE WORKING FULL. I DID THIS: 1. Connect the phone in Advanced Mode and make Erase of full flash. 2. Connect the phone in EasyRepair Mode and make Repair of the device again. 3. After successful Repair try to write firmware again. FOR E15A I DOWNLOAD THIS: E15i_1_3_A_0_50_CLARO_GT.oct FROM MEDUSA SUPPORT. I FLASHED WITH: Medusa Flasher, THE COMPUTER DETECTS FLASH MODE. AT FIRST CONECTED THEN DISCONECTED, BUT... I CONECTED THROUGHT UPDATER FROM SONY THEN I TAKED CONECTED PERMANTENLY. THEN I DISSCONECT FROM COMPUTER AND CONECT AND FLASH WITH Medusa Flasher AND WORKS GREAT!! MEDUSA BOX RULES!!! THANKS FROM ARGENTINA.