Sony XA1 (G3125) dead by reflash [Answered] - GSM-Forum

089999945 · 02-07-2018, 03:45

now phone show Red blinking when charge and i don't have dump file,
so can i repair it with Medusa pro in factory repair option?

Medusa Box · 02-07-2018, 06:46

Hello.

Yes, If You know eMMC pinout for this device, solder all necessary wires and try to connect the phone. If connection will be success, try to do "Factory Repair" using original Sony firmware for this device.

Note, that device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of original TA before repairing. Also, Software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing.

At first try to connect the device and post here the result, we will check and write You what to do the next.

089999945 · 02-08-2018, 07:40

Quote:

Originally Posted by Medusa Box

Hello.

Yes, If You know eMMC pinout for this device, solder all necessary wires and try to connect the phone. If connection will be success, try to do "Factory Repair" using original Sony firmware for this device.

Note, that device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of original TA before repairing. Also, Software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing.

At first try to connect the device and post here the result, we will check and write You what to do the next.

Here log connected

Code:

 Connecting...
Device       : Hynix eMMC HBG4a2
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 90014A484247346132A41D939C0B345D
Manufacturer ID       : 0X90
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X4A
Product name          : HBG4a2
Product revision      : 10.4
Product serial number : (hex) 1D939C0B
Manufacturing date    : 03/2017
---------------------------------------------------------------
CSD Info

CSD                   : D02701328F5903FFFFFFFFE78A400017
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15265792 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...Ok

Disk/Image size       : 47c00000 bytes
Device sector size    : 512 bytes
Partition offset      : 49725440
Number of sectors     : 11304960
Device Manufacturer   : Sony
Device Platform       : mt6757
Build ID              : 40.0.A.5.66
Display Build ID      : 40.0.A.5.66
Release ID            : 7.0
Device Model          : G3125
Device Name           : Xperia XA1
Architecture ABI      : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description     : full_hinoki-user 7.0 NRD90M 1498474411 test-keys

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/HBG4a2_08_02_2018_13_37_54.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.2; FW: 1.22.
P00: GPT              (00000000, 00000400)	512 KB
P01: ta               (00000400, 00001000)	2048 KB
P02: protect1         (00001400, 00005000)	10 MB
P03: protect2         (00006400, 00005C00)	11.5 MB
P04: ltalabel         (0000C000, 00008000)	16 MB
P05: fotakernel       (00014000, 00014000)	40 MB
P06: para             (00028000, 00000400)	512 KB
P07: expdb            (00028400, 00005000)	10 MB
P08: frp              (0002D400, 00000800)	1024 KB
P09: ppl              (0002DC00, 00000200)	256 KB
P10: nvdata           (0002DE00, 00010000)	32 MB
P11: metadata         (0003DE00, 00010000)	32 MB
P12: persist          (0004DE00, 00002200)	4.25 MB
P13: seccfg           (00050000, 00000200)	256 KB
P14: oemkeystore      (00050200, 00004000)	8 MB
P15: proinfo          (00054200, 00001800)	3072 KB
P16: md1img           (00055A00, 0000C000)	24 MB
P17: md1dsp           (00061A00, 00002600)	4.75 MB
P18: md1arm7          (00064000, 00002000)	4 MB
P19: md3img           (00066000, 00002800)	5 MB
P20: nvram            (00068800, 00002800)	5 MB
P21: lk               (0006B000, 00000800)	1024 KB
P22: lk2              (0006B800, 00000800)	1024 KB
P23: boot             (0006C000, 00014000)	40 MB
P24: logo             (00080000, 00004000)	8 MB
P25: tee1             (00084000, 00002800)	5 MB
P26: tee2             (00086800, 00002800)	5 MB
P27: sec1             (00089000, 00001000)	2048 KB
P28: scp1             (0008A000, 00000800)	1024 KB
P29: scp2             (0008A800, 00000800)	1024 KB
P30: rdimage          (0008B000, 00011000)	34 MB
P31: nvcfg            (0009C000, 00004000)	8 MB
P32: keystore         (000A0000, 00004000)	8 MB
P33: apps_log         (000A4000, 00008000)	16 MB
P34: diag             (000AC000, 00008000)	16 MB
P35: oem              (000B4000, 00094000)	296 MB
P36: cache            (00148000, 00064000)	200 MB
P37: Qnovo            (001AC000, 0000C000)	24 MB
P38: userdata         (001B8000, 02DB4000)	22.85 GB
P39: system           (02F6C000, 00AC8000)	5.391 GB
P40: flashinfo        (03A35C00, 00008000)	16 MB
Backuping TA partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/HBG4a2_TA_0x400_0x1000_08_02_2018_13_37_54.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 1.5.2; FW: 1.22.

Analyzing Trim Area (TA)... Damaged or unknown TA structure.

so it mean demaged TA?

Medusa Box · 02-08-2018, 07:46

No, probably, Software can't analize it because of unknown structure. Send us TA backup file "HBG4a2_TA_0x400_0x1000_08_02_2018_13_37_54.bi n" and we will check.

Now try to do "Factory Repair" using original Sony firmware for this device and post here the result. At first, try to write only preloader from full firmware. Read boot1 and full flash backup before repairing.

089999945 · 02-08-2018, 07:57

Quote:

Originally Posted by Medusa Box

No, probably, Software can't analize it because of unknown structure. Send us TA backup file "HBG4a2_TA_0x400_0x1000_08_02_2018_13_37_54.bi n" and we will check.

Now try to do "Factory Repair" using original Sony firmware for this device and post here the result. At first, try to write only preloader from full firmware. Read boot1 and full flash backup before repairing.

Here TA backup

https://drive.google.com/file/d/1fZ2...ew?usp=sharing

and how read boot 1 ,cus im not see now im try read full flash first.
full flash very big so can i read 2g/4g or must be read full ?

089999945 · 02-08-2018, 08:04

Pls tell me bro i do it now

Medusa Box · 02-08-2018, 09:57

Read 3-4 GB of flash memory, this is enough. Then try to do "Factory Repair" and post here the result.

089999945 · 02-08-2018, 10:12

Quote:

Originally Posted by Medusa Box

Read 3-4 GB of flash memory, this is enough. Then try to do "Factory Repair" and post here the result.

i have read ready but on factory repair can't be choose *.ftf and *.SIN_FILE_SET,after choose it has stop

Medusa Box · 02-08-2018, 10:35

Please upload somewhere firmwares, which You try to select and post here links, we eill check them and write You the result.

089999945 · 02-08-2018, 10:59

Quote:

Originally Posted by Medusa Box

Please upload somewhere firmwares, which You try to select and post here links, we eill check them and write You the result.

*.sin_file_set download from support area SETool
*.ftf download here
Sony_Xperia_XA1_G3125_40.0.A.3.7_1307-5285_Customized-AU

02-07-2018, 03:45	#1 (permalink)
089999945 No Life Poster Join Date: Mar 2010 Location: Cambodia Posts: 4,210 Member: 1260512 Status: Offline Sonork: 100.1605447 Thanks Meter: 461	Sony XA1 (G3125) dead by reflash [Answered] now phone show Red blinking when charge and i don't have dump file, so can i repair it with Medusa pro in factory repair option? Last edited by Medusa Box; 02-07-2018 at 06:46.

02-07-2018, 06:46	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Hello. Yes, If You know eMMC pinout for this device, solder all necessary wires and try to connect the phone. If connection will be success, try to do "Factory Repair" using original Sony firmware for this device. Note, that device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of original TA before repairing. Also, Software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing. At first try to connect the device and post here the result, we will check and write You what to do the next.

02-08-2018, 07:46	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	No, probably, Software can't analize it because of unknown structure. Send us TA backup file "HBG4a2_TA_0x400_0x1000_08_02_2018_13_37_54.bi n" and we will check. Now try to do "Factory Repair" using original Sony firmware for this device and post here the result. At first, try to write only preloader from full firmware. Read boot1 and full flash backup before repairing.

02-08-2018, 08:04	#6 (permalink)
089999945 No Life Poster Join Date: Mar 2010 Location: Cambodia Posts: 4,210 Member: 1260512 Status: Offline Sonork: 100.1605447 Thanks Meter: 461	Pls tell me bro i do it now

02-08-2018, 09:57	#7 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Read 3-4 GB of flash memory, this is enough. Then try to do "Factory Repair" and post here the result.

02-08-2018, 10:35	#9 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Please upload somewhere firmwares, which You try to select and post here links, we eill check them and write You the result.