GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > GSMServer Products > Medusa

Reply
 
LinkBack Thread Tools Display Modes
Old 02-04-2019, 19:50   #1036 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 40
Posts: 2,364
Member: 75408
Status: Offline
Thanks Meter: 959

Samsung SM-T311 Repair successfully done:
Code:
Model Settings:
Interface : eMMC
Brand     : Samsung
Model     : SM-T311
SRF       : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-T311_EMMC_V3W00M.srf
Voltage   : 2.0V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC VTU00M
Page size    : 512 B
Block size   : 512 B
Block count  : 30777344
Size         : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 15010056545530304DFC3D39868641FB
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : VTU00M
Full name             : KMVTU000LM-B503
Product revision      : 15.12
Product serial number : (hex) 3D398686
Manufacturing date    : 04/2014
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFFF8E40406D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 512 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 4Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x01) 00000001
Boot bus width        : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7659520 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/VTU00M_31_01_2019_23_20_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.4; FW: 1.24.
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-T311_EMMC_V3W00M.srf".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition...	Done.

Switched to user area.
Writing GPT partition...	Done.
Writing BOTA0 partition...	Done.
Writing BOTA1 partition...	Done.
Writing EFS partition...	Done.
Writing m9kefs1 partition...	Done.
Writing m9kefs2 partition...	Done.
Writing m9kefs3 partition...	Done.
Writing PARAM partition...	Done.
Writing BOOT partition...	Done.
Writing RECOVERY partition...	Done.
Writing OTA partition...	Done.

Smart Repair is successfully complete.
SW: 1.7.4; FW: 1.24.
Disconnected.
  Reply With Quote
Old 02-07-2019, 11:55   #1037 (permalink)
No Life Poster
 
louka's Avatar
 
Join Date: Nov 2005
Posts: 948
Member: 198016
Status: Offline
Sonork: 100.1602918
Thanks Meter: 407
LG D325 Repair successfully done

Welcome to Medusa Box Software version 2.6.1.5
Selected device model: LG D325 (MSM8610) USB
Connecting. Please wait...
Interface : USB
CPU : Qualcomm MSM8610
Storage Device: Hynix eMMC H4G1d
Device ID : 00900001
Block size : 512 bytes
Blocks : 7634944
Storage size : 3728 Mb
Opening "C:\Program Files\GsmServer\Medusa\Firmware\LG_D325_Repair.mf" file...
Writing ABOOT section. Please wait... Done
Writing BOOT section. Please wait... Done
Disconnected
Repair done.
  Reply With Quote
Old 02-27-2019, 02:09   #1038 (permalink)
Insane Poster
 
Join Date: Sep 2010
Posts: 90
Member: 1394213
Status: Offline
Thanks Meter: 11
Some people XDDD... i mean mean, alway forget to make backups. Here is the NVram Data backup /write for Blackview E7s to restore 3G.

Welcome to Medusa Pro Software version 1.7.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0

Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable.
Connecting...
Detecting Chip Version...
HW Chip : MT6580
HW Version : 8A00.CA00.0000.0000
Brom Version: FF
Boot Loader Version: 01
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: 13014E52.314A3936.4E1054CF.C0EE223D
eMMC Flash: Unknown: R1J96N
DA ver : 4.2.9c
Initializing Memory Flash...
Initialization completed
Sending Loader...
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 15028 Mb
Internal RAM size : 128 Kb
External RAM size : 2048 Mb
Device :
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00002800) 5 MB
P03: protect1 (00004400, 00005000) 10 MB
P04: protect2 (00009400, 00005000) 10 MB
P05: seccfg (0000E400, 00000200) 256 KB
P06: lk (0000E600, 00000300) 384 KB
P07: boot (0000E900, 00008000) 16 MB
P08: recovery (00016900, 00008000) 16 MB
P09: para (0001E900, 00000400) 512 KB
P10: logo (0001ED00, 00004000) 8 MB
P11: expdb (00022D00, 00005000) 10 MB
P12: frp (00027D00, 00000800) 1024 KB
P13: nvdata (00028500, 00010000) 32 MB
P14: metadata (00038500, 00013B00) 39.38 MB
P15: oemkeystore (0004C000, 00001000) 2048 KB
P16: secro (0004D000, 00003000) 6 MB
P17: keystore (00050000, 00004000) 8 MB
P18: system (00054000, 00300000) 1536 MB
P19: cache (00354000, 00080000) 256 MB
P20: userdata (003D4000, 0197DC00) 12.75 GB
P21: flashinfo (01D51C00, 00008000) 16 MB
Save to C:/Users/Pedro Mosqueda/Desktop/_mar feb 26 2019_20_40_19.mpt file...
Reading partition nvdata... Done.
Reading is finished.
SW: 1.7.5; FW: 1.24.
Disconnected.

Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable.
Connecting...
Detecting Chip Version...
HW Chip : MT6580
HW Version : 8A00.CA00.0000.0000
Brom Version: FF
Boot Loader Version: 01
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: 90014A48.41473265.50728D7.CCAC313
eMMC Flash: Hynix: HAG2e
DA ver : 4.2.9c
Initializing Memory Flash...
Initialization completed
Sending Loader...
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 15032 Mb
Internal RAM size : 128 Kb
External RAM size : 2048 Mb
Device :
Page size : 512 B
Block size : 512 B
Block count : 30785536
Size : 14.68 GB (15032.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00002800) 5 MB
P03: protect1 (00004400, 00005000) 10 MB
P04: protect2 (00009400, 00005000) 10 MB
P05: seccfg (0000E400, 00000200) 256 KB
P06: lk (0000E600, 00000300) 384 KB
P07: boot (0000E900, 00008000) 16 MB
P08: recovery (00016900, 00008000) 16 MB
P09: para (0001E900, 00000400) 512 KB
P10: logo (0001ED00, 00004000) 8 MB
P11: expdb (00022D00, 00005000) 10 MB
P12: frp (00027D00, 00000800) 1024 KB
P13: nvdata (00028500, 00010000) 32 MB
P14: metadata (00038500, 00013B00) 39.38 MB
P15: oemkeystore (0004C000, 00001000) 2048 KB
P16: secro (0004D000, 00003000) 6 MB
P17: keystore (00050000, 00004000) 8 MB
P18: system (00054000, 00400000) 2048 MB
P19: cache (00454000, 00080000) 256 MB
P20: userdata (004D4000, 0187FC00) 12.25 GB
P21: flashinfo (01D53C00, 00008000) 16 MB
Write data verification is enabled.
Write partitions from C:/Users/Pedro Mosqueda/Desktop/_mar feb 26 2019_20_40_19.mpt file...
Writing partition nvdata... Done.
SW: 1.7.5; FW: 1.24.
Disconnected.
  Reply With Quote
Old 03-14-2019, 08:55   #1039 (permalink)
No Life Poster
 
GsmKotla's Avatar
 
Join Date: Sep 2013
Location: I Love My Pakistan
Posts: 609
Member: 2016954
Status: Offline
Thanks Meter: 307
Huawei Y635-l01 successfully Repaired

odel Settings:
Interface : USB
Brand : Huawei
Model : y635-l01
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/HUAWEI_Y635-L01.srf
Core : Qualcomm MSM8916
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_007050E1
Core : Qualcomm MSM8916
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.3; FW: 1.24.
P00: GPT (00000000, 00000022) 17 KB
P01: sbl1 (00000022, 00000400) 512 KB
P02: hyp (00000422, 00000400) 512 KB
P03: sec (00002000, 00000040) 32 KB
P04: DDR (00002040, 00000040) 32 KB
P05: rpm (00004000, 00000400) 512 KB
P06: tz (00004400, 00000400) 512 KB
P07: aboot (00004800, 00002780) 4.938 MB
P08: pad (00006F80, 00000800) 1024 KB
P09: oeminfo (00007780, 00020000) 64 MB
P10: modemst1 (00027780, 00002000) 4 MB
P11: modemst2 (00029780, 00002000) 4 MB
P12: modem (0002C000, 00030000) 96 MB
P13: fsg (0005C000, 00002000) 4 MB
P14: fsc (0005E000, 00001000) 2048 KB
P15: ssd (0005F000, 00001000) 2048 KB
P16: log (00060000, 00020000) 64 MB
P17: persist (00080000, 00010000) 32 MB
P18: boot (00090000, 0000A000) 20 MB
P19: recovery (0009A000, 0000C000) 24 MB
P20: cust (000A6000, 00180000) 768 MB
P21: cache (00226000, 00080000) 256 MB
P22: misc (002A6000, 00002000) 4 MB
P23: system (002A8000, 00380000) 1792 MB
P24: userdata (00628000, 00867FDF) 4.203 GB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/HUAWEI_Y635-L01.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing hyp partition... Done.
Writing sec partition... Done.
Writing DDR partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing oeminfo partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing modem partition... Done.
Writing fsg partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing log partition... Done.
Writing persist partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing cust partition... Done.

Smart Repair is successfully complete.
SW: 1.7.3; FW: 1.24.
Disconnected.
  Reply With Quote
Old 03-15-2019, 18:39   #1040 (permalink)
No Life Poster
 
CDMA_RASHID's Avatar
 
Join Date: Jul 2008
Age: 32
Posts: 1,001
Member: 821646
Status: Offline
Thanks Meter: 475
H962 boot repair done.



Quote:
Model Settings:
Interface : USB
Brand : LG
Model : H962
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_H962_USB.srf
Core : Qualcomm MSM8992
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_009690E1
Core : Qualcomm MSM8992
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 0002B000) 86 MB
P02: spare1 (0002F000, 00001000) 2048 KB
P03: pmic (00030000, 00000400) 512 KB
P04: sbl1 (00030400, 00000800) 1024 KB
P05: tz (00030C00, 00000800) 1024 KB
P06: sdi (00031400, 00000400) 512 KB
P07: hyp (00031800, 00000400) 512 KB
P08: rpm (00031C00, 00000400) 512 KB
P09: aboot (00032000, 00001000) 2048 KB
P10: sbl1bak (00033000, 00000800) 1024 KB
P11: pmicbak (00033800, 00000400) 512 KB
P12: hypbak (00033C00, 00000400) 512 KB
P13: tzbak (00034000, 00000800) 1024 KB
P14: rpmbak (00034800, 00000400) 512 KB
P15: abootbak (00034C00, 00001000) 2048 KB
P16: sdibak (00035C00, 00000400) 512 KB
P17: limits (00036000, 00000400) 512 KB
P18: apdp (00036400, 00000400) 512 KB
P19: msadp (00036800, 00000400) 512 KB
P20: dpo (00036C00, 00000400) 512 KB
P21: spare2 (00037000, 00001000) 2048 KB
P22: persistent (00038000, 00000400) 512 KB
P23: devinfo (00038400, 00000800) 1024 KB
P24: spare3 (00038C00, 00003400) 6.5 MB
P25: misc (0003C000, 00008000) 16 MB
P26: persist (00044000, 00010000) 32 MB
P27: modemst1 (00054000, 00000C00) 1536 KB
P28: modemst2 (00054C00, 00000C00) 1536 KB
P29: fsg (00055800, 00000C00) 1536 KB
P30: fsc (00056400, 00000400) 512 KB
P31: ssd (00056800, 00000400) 512 KB
P32: keystore (00056C00, 00000400) 512 KB
P33: DDR (00057000, 00001000) 2048 KB
P34: sec (00058000, 00000400) 512 KB
P35: encrypt (00058400, 00000400) 512 KB
P36: eksst (00058800, 00000400) 512 KB
P37: rct (00058C00, 00000400) 512 KB
P38: spare4 (00059000, 00003000) 6 MB
P39: laf (0005C000, 00018000) 48 MB
P40: boot (00074000, 00014000) 40 MB
P41: recovery (00088000, 00014000) 40 MB
P42: drm (0009C000, 00005000) 10 MB
P43: sns (000A1000, 00003000) 6 MB
P44: mpt (000A4000, 00010000) 32 MB
P45: raw_resources (000B4000, 00002000) 4 MB
P46: raw_resourcesbak (000B6000, 00002000) 4 MB
P47: factory (000B8000, 00017000) 46 MB
P48: spare5 (000CF000, 00001000) 2048 KB
P49: fota (000D0000, 00005000) 10 MB
P50: fau (000D5000, 00007000) 14 MB
P51: system (000DC000, 0085E000) 4.184 GB
P52: cust (0093A000, 00050000) 160 MB
P53: cache (0098A000, 00268000) 1232 MB
P54: userdata (00BF2000, 06889800) 52.27 GB
P55: grow (0747B800, 000007DF) 1008 KB
Repairing from file "C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_H962_USB.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing modem partition... Done.
Writing spare1 partition... Done.
Writing pmic partition... Done.
Writing sbl1 partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing hyp partition... Done.
Writing rpm partition... Done.
Writing aboot partition... Done.
Writing sbl1bak partition... Done.
Writing pmicbak partition... Done.
Writing hypbak partition... Done.
Writing tzbak partition... Done.
Writing rpmbak partition... Done.
Writing abootbak partition... Done.
Writing sdibak partition... Done.
Writing limits partition... Done.
Writing apdp partition... Done.
Writing msadp partition... Done.
Writing dpo partition... Done.
Writing spare2 partition... Done.
Writing persistent partition... Done.
Writing devinfo partition... Done.
Writing spare3 partition... Done.
Writing misc partition... Done.
Writing persist partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing fsg partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing keystore partition... Done.
Writing DDR partition... Done.
Writing sec partition... Done.
Writing encrypt partition... Done.
Writing eksst partition... Done.
Writing rct partition... Done.
Writing spare4 partition... Done.
Writing laf partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing drm partition... Done.
Writing sns partition... Done.
Writing mpt partition... Done.
Writing raw_resources partition... Done.
Writing raw_resourcesbak partition... Done.
Writing factory partition... Done.
Writing spare5 partition... Done.
Writing fota partition... Done.
Writing fau partition... Done.

Smart Repair is successfully complete.
SW: 1.7.6; FW: 1.24.
Disconnected.
  Reply With Quote
Old 03-26-2019, 14:57   #1041 (permalink)
Freak Poster
 
shaikh_shoeb50's Avatar
 
Join Date: May 2011
Location: ..:Inside UR Brain:..
Age: 30
Posts: 431
Member: 1586370
Status: Offline
Sonork: 100.1618206
Thanks Meter: 124
H791 Nexus 5X Successfully dead boot Repair...!!!

H791 Nexus 5X Successfully dead boot Repair...!!!



Quote:
Model Settings:
Interface : eMMC
Brand : LG
Model : H790
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_H790_EMMC_016G72.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Toshiba eMMC 032G74
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID : 110100303332473734009E8D8D6214D7
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 032G74
Product revision : 0.0
Product serial number : (hex) 9E8D8D62
Manufacturing date : 01/2017
---------------------------------------------------------------
CSD Info

CSD : D02700320F5903FFFFFFFFE78640009B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15269888 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 1458176
Number of sectors : 6291456
Device Manufacturer :google
Build ID :PQ2A.190205.001
Display Build ID :PQ2A.190205.001
Release ID :9
Device Model :Nexus 5X
Device Name :aosp_bullhead
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :bullhead-user 8.1.0 OPM3.171019.014 4503998 release-keys

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/032G74_26_03_2019_17_04_32.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 0002B000) 86 MB
P02: pmic (00030000, 00000400) 512 KB
P03: sbl1 (00030400, 00000800) 1024 KB
P04: tz (00030C00, 00000800) 1024 KB
P05: sdi (00031400, 00000400) 512 KB
P06: hyp (00031800, 00000400) 512 KB
P07: rpm (00031C00, 00000400) 512 KB
P08: aboot (00032000, 00001000) 2048 KB
P09: sbl1bak (00033000, 00000800) 1024 KB
P10: pmicbak (00033800, 00000400) 512 KB
P11: tzbak (00033C00, 00000800) 1024 KB
P12: hypbak (00034400, 00000400) 512 KB
P13: rpmbak (00034800, 00000400) 512 KB
P14: abootbak (00034C00, 00001000) 2048 KB
P15: limits (00035C00, 00000400) 512 KB
P16: config (00036000, 00000400) 512 KB
P17: apdp (00036400, 00000400) 512 KB
P18: msadp (00036800, 00000400) 512 KB
P19: dpo (00036C00, 00000400) 512 KB
P20: fsc (00037000, 00000400) 512 KB
P21: ssd (00037400, 00000400) 512 KB
P22: sec (00037800, 00000400) 512 KB
P23: misc (00037C00, 00008000) 16 MB
P24: persist (0003FC00, 00010000) 32 MB
P25: modemst1 (0004FC00, 00000C00) 1536 KB
P26: modemst2 (00050800, 00000C00) 1536 KB
P27: fsg (00051400, 00000C00) 1536 KB
P28: DDR (00052000, 00001000) 2048 KB
P29: imgdata (00053000, 00001800) 3072 KB
P30: metadata (00054800, 00008000) 16 MB
P31: laf (0005C800, 00018000) 48 MB
P32: keymaster (00074800, 00000400) 512 KB
P33: cmnlib (00074C00, 00000400) 512 KB
P34: keymasterbak (00075000, 00000400) 512 KB
P35: cmnlibbak (00075400, 00000400) 512 KB
P36: oem (00078000, 00020000) 64 MB
P37: boot (00098000, 00010000) 32 MB
P38: recovery (000A8000, 00010000) 32 MB
P39: vendor (000B8000, 0007C000) 248 MB
P40: cache (00134000, 00030000) 96 MB
P41: system (00164000, 00600000) 3072 MB
P42: persistent (00764000, 00000400) 512 KB
P43: devinfo (00768000, 00000400) 512 KB
P44: keystore (00768400, 00000400) 512 KB
P45: userdata (0076C000, 015B3000) 10.85 GB
P46: grow (01D20000, 00039FDF) 116 MB
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_H790_EMMC_016G72.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing modem partition... Done.
Writing pmic partition... Done.
Writing sbl1 partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing hyp partition... Done.
Writing rpm partition... Done.
Writing aboot partition... Done.
Writing limits partition... Done.
Writing config partition... Done.
Writing apdp partition... Done.
Writing msadp partition... Done.
Writing dpo partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing sec partition... Done.
Writing misc partition... Done.
Writing persist partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing fsg partition... Done.
Writing DDR partition... Done.
Writing imgdata partition... Done.
Writing metadata partition... Done.
Writing laf partition... Done.
Writing keymaster partition... Done.
Writing cmnlib partition... Done.
Writing keymasterbak partition... Done.
Writing cmnlibbak partition... Done.
Writing oem partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing persistent partition... Done.
Writing devinfo partition... Done.
Writing keystore partition... Done.

Smart Repair is successfully complete.
SW: 1.7.6; FW: 1.24.
Disconnected.
  Reply With Quote
The Following User Says Thank You to shaikh_shoeb50 For This Useful Post:
Old 04-22-2019, 21:33   #1042 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Posts: 2,370
Member: 231728
Status: Offline
Thanks Meter: 1,365
LG-D618 dead boot repaired easely done usb only

Code:
Welcome to Medusa Pro Software version 1.7.6. 
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1

Model Settings:
Interface : USB
Core      : Qualcomm MSM8226
Loader    : LG_loader_v1

Connecting...
CPU name     : Qualcomm MSM8226 
Flash Id     : 150001 
Device       : Samsung eMMC 8WMB3R
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT              (00000000, 00004000)	8 MB
P01: modem            (00004000, 00020000)	64 MB
P02: sbl1             (00024000, 00000800)	1024 KB
P03: rpm              (00024800, 00000400)	512 KB
P04: tz               (00024C00, 00000400)	512 KB
P05: sdi              (00025000, 00000400)	512 KB
P06: aboot            (00025400, 00001000)	2048 KB
P07: rpmb             (00026400, 00000400)	512 KB
P08: tzb              (00026800, 00000400)	512 KB
P09: abootb           (00026C00, 00001000)	2048 KB
P10: pad              (00027C00, 00001000)	2048 KB
P11: modemst1         (00028C00, 00001800)	3072 KB
P12: modemst2         (0002A400, 00001800)	3072 KB
P13: misc             (0002BC00, 00008000)	16 MB
P14: persist          (00034000, 00010000)	32 MB
P15: laf              (00044000, 0000B000)	22 MB
P16: boot             (00050000, 0000B000)	22 MB
P17: recovery         (0005B000, 0000B000)	22 MB
P18: fsg              (00066000, 00001800)	3072 KB
P19: fsc              (00068000, 00000400)	512 KB
P20: ssd              (00068400, 00000400)	512 KB
P21: DDR              (0006C000, 00000400)	512 KB
P22: encrypt          (00070000, 00000400)	512 KB
P23: rct              (00070400, 00000400)	512 KB
P24: drm              (00074000, 00004000)	8 MB
P25: sns              (00078000, 00004000)	8 MB
P26: factory          (0007C000, 0000A000)	20 MB
P27: fota             (00086000, 00010000)	32 MB
P28: sbl1b            (00098000, 00000800)	1024 KB
P29: mpt              (00098800, 00010000)	32 MB
P30: cust             (000AC000, 00032000)	100 MB
P31: eksst            (000E0000, 00000400)	512 KB
P32: system           (000E4000, 00400000)	2048 MB
P33: cache            (004E4000, 001C2000)	900 MB
P34: userdata         (006A6000, 007DEC00)	4030 MB
P35: grow             (00E88000, 00007FDF)	15.98 MB
Opening G:/Downloads/General/D61820d_00_2.kdz file...
Write data verification is enabled.
Writing. Please wait...
Writing partition PrimaryGPT...	Done.
Writing partition modem...	Done.
Writing partition sbl1...	Done.
Writing partition rpm...	Done.
Writing partition tz...	Done.
Writing partition sdi...	Done.
Writing partition aboot...	Done.
Writing partition rpmb...	Done.
Writing partition tzb...	Done.
Writing partition abootb...	Done.
Writing partition persist...	Done.
Writing partition laf...	Done.
Writing partition boot...	Done.
Writing partition recovery...	Done.
Writing partition rct...	Done.
Writing partition factory...	Done.
Writing partition sbl1b...	Done.
Writing partition cust...	Done.
Writing partition BackupGPT...	Done.
Writing is finished.
SW: 1.7.6; FW: 1.24.
Disconnected.
  Reply With Quote
The Following User Says Thank You to rebainoor For This Useful Post:
Old 05-18-2019, 22:01   #1043 (permalink)
No Life Poster
 
louka's Avatar
 
Join Date: Nov 2005
Posts: 948
Member: 198016
Status: Offline
Sonork: 100.1602918
Thanks Meter: 407
LG D801 Repair successfully done

Welcome to Medusa Pro Software version 1.7.6.
Started.
Reader #0: Generic EMV Smartcard Reader 1
Reader #1: USB Fenix Card Reader 0

Model Settings:
Interface : USB
Brand : LG
Model : D801
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D801_USB_BY_STARKRIMES.srf
Core : Qualcomm MSM8974LG
Loader : LG_loader_v1

Connecting...
CPU name : Qualcomm MSM8974LG
Flash Id : 110001
Device : Toshiba THGBMBG7D2KBAIL 032G96
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00000800) 1024 KB
P01: Basic data partition (00000800, 03A3D000) 29.12 GB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D801_USB_BY_STARKRIMES.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing modem partition... Done.
Writing sbl1 partition... Done.
Writing dbi partition... Done.
Writing DDR partition... Done.
Writing aboot partition... Done.
Writing rpm partition... Done.
Writing boot partition... Done.
Writing tz partition... Done.
Writing pad partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing pad1 partition... Done.
Writing misc partition... Done.
Writing persist partition... Done.
Writing recovery partition... Done.
Writing fsg partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing pad2 partition... Done.
Writing encrypt partition... Done.
Writing drm partition... Done.
Writing sns partition... Done.
Writing ve partition... Done.
Writing laf partition... Done.
Writing fota partition... Done.
Writing mpt partition... Done.
Writing carrier partition... Done.
Writing eri partition... Done.
Writing blus partition... Done.
Writing dbibak partition... Done.
Writing rpmbak partition... Done.
Writing tzbak partition... Done.
Writing rct partition... Done.
Writing tombstones partition... Done.
Writing spare partition... Done.
Writing grow partition... Done.

Smart Repair is successfully complete.
SW: 1.7.6; FW: 1.24.
Disconnected.
  Reply With Quote
The Following User Says Thank You to louka For This Useful Post:
Old 07-17-2019, 11:57   #1044 (permalink)
No Life Poster
 
Join Date: Oct 2006
Location: pakistan
Posts: 614
Member: 361094
Status: Offline
Sonork: 100.1597521
Thanks Meter: 157
Thumbs up i9300i dead boot done

Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic Usb Smart Card Reader 0
Reader #2: Generic Usb Smart Card Reader 1
Reader #3: Generic Usb Smart Card Reader 2

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-I9300I
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9300I_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...

ERROR[001]: Can not connect. No target device present.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-I9300I
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9300I_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Toshiba eMMC 016GE2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID : 11010030313647453204901F84C91135
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016GE2
Product revision : 0.4
Product serial number : (hex) 901F84C9
Manufacturing date : 01/2014
---------------------------------------------------------------
CSD Info

CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 307840
Number of sectors : 4620288
Device Manufacturer :samsung
Device Platform :msm8226
Build ID :KTU84P
Display Build ID :KTU84P.I9300IDDUBOI1
Release ID :4.4.4
Device Model :GT-I9300I
Device Name :s3ve3gdd
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :s3ve3gdd-user 4.4.4 KTU84P I9300IDDUBOI1 release-keys

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/016GE2_17_07_2019_14_46_08.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: apnhlos (00002000, 00007000) 14 MB
P02: modem (00009000, 00018E00) 49.75 MB
P03: sbl1 (00021E00, 00000400) 512 KB
P04: dbi (00022200, 00000040) 32 KB
P05: ddr (00022240, 00000040) 32 KB
P06: aboot (00022280, 00001000) 2048 KB
P07: rpm (00023280, 00000400) 512 KB
P08: tz (00023680, 00000400) 512 KB
P09: pad (00023A80, 00000800) 1024 KB
P10: param (00024280, 00005000) 10 MB
P11: efs (00029280, 00007000) 14 MB
P12: modemst1 (00030280, 00001800) 3072 KB
P13: modemst2 (00031A80, 00001800) 3072 KB
P14: boot (00033280, 00005000) 10 MB
P15: recovery (00038280, 00005000) 10 MB
P16: fota (0003D280, 00005000) 10 MB
P17: backup (00042280, 000037EE) 6.991 MB
P18: fsg (00045A6E, 00001800) 3072 KB
P19: fsc (0004726E, 00000002) 1024 b
P20: ssd (00047270, 00000010) 8 KB
P21: persist (00047280, 00004000) 8 MB
P22: system (0004B280, 00468000) 2256 MB
P23: cache (004B3280, 000AE000) 348 MB
P24: hidden (00561280, 00005000) 10 MB
P25: userdata (00566280, 017F3D5F) 11.98 GB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9300I_EMMC.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing dbi partition... Done.
Writing ddr partition... Done.
Writing aboot partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing pad partition... Done.
Writing param partition... Done.
Writing efs partition... Done.
Writing boot partition... Done.
Writing backup partition... Done.

Smart Repair is successfully complete.
SW: 1.7.7; FW: 1.24.
Disconnected.
  Reply With Quote
The Following User Says Thank You to nadim electro For This Useful Post:
Old 07-29-2019, 05:05   #1045 (permalink)
No Life Poster
 
GsmKotla's Avatar
 
Join Date: Sep 2013
Location: I Love My Pakistan
Posts: 609
Member: 2016954
Status: Offline
Thanks Meter: 307
SM-J110H Sucessfully Repair done

odel Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J110H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J110H_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A483447326211017C672808A28B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 7C672808
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info

CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_29_07_2019_07_58_45.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.3; FW: 1.24.
P00: PART_EE (00000001, 00743FFF) 3720 MB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J110H_EMMC.srf".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition... Done.

Switched to boot area partition 2.
Writing BOOT2 partition... Done.

Switched to user area.
Writing GPT partition... Done.
Writing SBOOT partition... Done.
Writing SBOOT2 partition... Done.
Writing wfixnv1 partition... Done.
Writing wfixnv2 partition... Done.
Writing tdfixnv1 partition... Done.
Writing tdfixnv2 partition... Done.
Writing WDSP partition... Done.
Writing MODEM partition... Done.
Writing MODEM2 partition... Done.
Writing TDDSP partition... Done.
Writing FOTA_SIG partition... Done.
Writing wruntimenv1 partition... Done.
Writing wruntimenv2 partition... Done.
Writing tdruntimenv1 partition... Done.
Writing tdruntimenv2 partition... Done.
Writing PARAM partition... Done.
Writing EFS partition... Done.
Writing PRODNV partition... Done.
Writing RESERVED2 partition... Done.
Writing KERNEL partition... Done.
Writing RECOVERY partition... Done.
Writing PERSDATA partition... Done.
Writing CSC partition... Done.

Smart Repair is successfully complete.
SW: 1.7.3; FW: 1.24.
Disconnected.
  Reply With Quote
Old 09-25-2019, 13:50   #1046 (permalink)
Major Poster
 
Join Date: Dec 2008
Location: litle alaska philippines
Age: 30
Posts: 43
Member: 933096
Status: Offline
Sonork: inocentedeti
Thanks Meter: 18
is there anyone repair ASUS Z010D deadboot via JTAG on MEDUSA PRO?

back to life..


TIA..
  Reply With Quote
Old 09-30-2019, 05:33   #1047 (permalink)
No Life Poster
 
GsmKotla's Avatar
 
Join Date: Sep 2013
Location: I Love My Pakistan
Posts: 609
Member: 2016954
Status: Offline
Thanks Meter: 307
SM-G532F boot Repair don

Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...

Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.

Switched to user area.
Writing partition lk... Done.
Writing partition efuse... Done.
Writing partition tee1... Done.
Writing partition PARAM... Done.
Writing is finished.
SW: 1.7.3; FW: 1.24.
  Reply With Quote
Old 10-01-2019, 15:45   #1048 (permalink)
No Life Poster
 
Muhammadsaqib11's Avatar
 
Join Date: Jun 2011
Location: pakistan
Posts: 2,240
Member: 1602407
Status: Offline
Sonork: 100.1648061
Thanks Meter: 346
TA-1029 just go recoverey no download & fastboot mode Recovered

Code:
Model Settings:
Interface : USB
Loading custom loader C:/Program Files/Medusa Pro Software/firmwareFolder/PROG_EMMC_FIREHOSE_8909_DDR.MBN file...
Core      : Custom Loader
Loader    : PROG_EMMC_FIREHOSE_8909_DDR.MBN

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device       : CoreID_009600E1
Core         : Custom Loader
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT              (00000000, 00000022)	17 KB
P01: sbl1             (00000022, 00000400)	512 KB
P02: sbl1bak          (00000422, 00000400)	512 KB
P03: aboot            (00000822, 00000800)	1024 KB
P04: abootbak         (00001022, 00000800)	1024 KB
P05: rpm              (00001822, 00000400)	512 KB
P06: rpmbak           (00001C22, 00000400)	512 KB
P07: tz               (00002022, 00000600)	768 KB
P08: tzbak            (00002622, 00000600)	768 KB
P09: DDR              (00002C22, 00000040)	32 KB
P10: pad              (00002C62, 00000800)	1024 KB
P11: ssd              (00003462, 00000010)	8 KB
P12: sutinfo          (00003472, 00000002)	1024 b
P13: systeminfo       (00003474, 00000200)	256 KB
P14: splash           (00003674, 00001800)	3072 KB
P15: reserved         (00004E74, 0000018C)	198 KB
P16: fsg              (00005000, 00000C00)	1536 KB
P17: modemst1         (00006000, 00000C00)	1536 KB
P18: modemst2         (00007000, 00000C00)	1536 KB
P19: fsc              (00008000, 00000004)	2048 b
P20: rf_nv            (00008004, 00001000)	2048 KB
P21: deviceinfo       (00009004, 00000800)	1024 KB
P22: securefs         (00009804, 00001000)	2048 KB
P23: cust_nv          (0000A804, 00001000)	2048 KB
P24: ftmlog           (0000B804, 00010000)	32 MB
P25: box              (0001B804, 00004000)	8 MB
P26: ftm              (0001F804, 00010000)	32 MB
P27: hidden           (0002F804, 0000D000)	26 MB
P28: cda              (0003C804, 00004000)	8 MB
P29: logdump          (00040804, 00005000)	10 MB
P30: elabel           (00045804, 00002000)	4 MB
P31: reserved_bak     (00047804, 00001000)	2048 KB
P32: recovery         (00048804, 00010000)	32 MB
P33: sec              (00058804, 00000020)	16 KB
P34: boot             (00058824, 00010000)	32 MB
P35: modem            (00068824, 00020000)	64 MB
P36: system           (00088824, 0059A000)	2868 MB
P37: misc             (00622824, 00000800)	1024 KB
P38: cache            (00623024, 00032000)	100 MB
P39: persist          (00655024, 00010000)	32 MB
P40: devinfo          (00668000, 00000800)	1024 KB
P41: keystore         (0066C000, 00000400)	512 KB
P42: config           (0066C400, 00000400)	512 KB
P43: cmnlib           (00670000, 00000200)	256 KB
P44: cmnlibbak        (00670200, 00000200)	256 KB
P45: keymaster        (00670400, 00000200)	256 KB
P46: keymasterbak     (00670600, 00000200)	256 KB
P47: userdata         (00674000, 0081BFDF)	4.055 GB
Added partition GPT to constructor file.
Added partition sbl1 to constructor file.
Added partition sbl1bak to constructor file.
Added partition aboot to constructor file.
Added partition abootbak to constructor file.
Added partition rpm to constructor file.
Added partition rpmbak to constructor file.
Added partition tz to constructor file.
Added partition tzbak to constructor file.
Added partition DDR to constructor file.
Added partition pad to constructor file.
Added partition modemst1 to constructor file.
Added partition modemst2 to constructor file.
Added partition fsc to constructor file.
Added partition rf_nv to constructor file.
Added partition ftmlog to constructor file.
Added partition recovery to constructor file.
Added partition sec to constructor file.
Added partition boot to constructor file.
Added partition modem to constructor file.
Added partition misc to constructor file.
Added partition cache to constructor file.
Invalid file C:/Program Files/Medusa Pro Software/firmwareFolder/Nokia_TA-1029 backup.srf.
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/NOKIA_TA-1029.SRF".
Write data verification is enabled.
Writing GPT partition...	Done.
Writing sbl1 partition...	Done.
Writing sbl1bak partition...	Done.
Writing aboot partition...	Done.
Writing abootbak partition...	Done.
Writing rpm partition...	Done.
Writing rpmbak partition...	Done.
Writing tz partition...	Done.
Writing tzbak partition...	Done.
Writing DDR partition...	Done.
Writing pad partition...	Done.
Writing ssd partition...	Done.
Writing sutinfo partition...	Done.
Writing systeminfo partition...	Done.
Writing splash partition...	Done.
Writing reserved partition...	Done.
Writing fsg partition...	Done.
Writing modemst1 partition...	Done.
Writing modemst2 partition...	Done.
Writing fsc partition...	Done.
Writing rf_nv partition...	Done.
Writing deviceinfo partition...	Done.
Writing securefs partition...	Done.
Writing cust_nv partition...	Done.
Writing ftmlog partition...	Done.
Writing box partition...	Done.
Writing ftm partition...	Done.
Writing hidden partition...	Done.
Writing cda partition...	Done.
Writing logdump partition...	Done.
Writing elabel partition...	Done.
Writing reserved_bak partition...	Done.
Writing recovery partition...	Done.
Writing sec partition...	Done.
Writing boot partition...	Done.
Writing modem partition...	Done.
Writing misc partition...	Done.
Writing cache partition...	Done.
Writing persist partition...	Done.
Writing devinfo partition...	Done.
Writing keystore partition...	Done.
Writing config partition...	Done.
Writing cmnlib partition...	Done.
Writing cmnlibbak partition...	Done.
Writing keymaster partition...	Done.
Writing keymasterbak partition...	Done.

Smart Repair is successfully complete.
SW: 1.7.7; FW: 1.24.
with
NOKIA_TA-1029.SRf (public files)

Br,
GSM City
  Reply With Quote
Old 01-17-2020, 06:48   #1049 (permalink)
Crazy Poster
 
Join Date: Feb 2016
Location: Tashkent
Posts: 51
Member: 2532428
Status: Offline
Sonork: https://t.me/BotirJon
Thanks Meter: 17
ZTE Axon a1 Frp reset

Welcome to Medusa Pro Software version 2.0.3.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Alcor Micro USB Smart Card Reader 2
Reader #3: Alcor Micro USB Smart Card Reader 3
Reader #4: FT SCR2000 0

Model Settings:
Interface : USB
SRF "D:/Mobile/!OctoplusProRom/ZTE_Axon_A1_USB.srf" has been installed successfully.

Model Settings:
Interface : USB
Brand : ZTE
Model : Axon_A1
SRF : D:/Mobile/!OctoplusProRom/ZTE_Axon_A1_USB.srf
Core : Qualcomm MSM8974
Loader : QLoader_v7_ZTE

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_007B80E1
Core : Qualcomm MSM8974
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.0.3; FW: 1.24.
P00: GPT (00000000, 00004000) 8 MB
P01: sbl1 (00004000, 00004000) 8 MB
P02: DDR (00008000, 00004000) 8 MB
P03: rpm (0000C000, 00004000) 8 MB
P04: tz (00010000, 00004000) 8 MB
P05: dbi (00014000, 00004000) 8 MB
P06: fsg (00018000, 00004000) 8 MB
P07: aboot (0001C000, 00004000) 8 MB
P08: modemst1 (00020000, 00004000) 8 MB
P09: modemst2 (00024000, 00004000) 8 MB
P10: fsc (00028000, 00004000) 8 MB
P11: persist (0002C000, 00014000) 40 MB
P12: ztelk (00040000, 00004000) 8 MB
P13: misc (00044000, 00004000) 8 MB
P14: keystore (00048000, 00004000) 8 MB
P15: devinfo (0004C000, 00004000) 8 MB
P16: ssd (00050000, 00004000) 8 MB
P17: fsc (00054000, 00004000) 8 MB
P18: ztecfg (00058000, 00004000) 8 MB
P19: pad (0005C000, 00004000) 8 MB
P20: modem (00060000, 00030000) 96 MB
P21: echarge (00090000, 00008000) 16 MB
P22: splash (00098000, 00008000) 16 MB
P23: boot (000A0000, 00010000) 32 MB
P24: recovery (000B0000, 00010000) 32 MB
P25: cache (000C0000, 000A0000) 320 MB
P26: system (00160000, 00500000) 2560 MB
P27: userdata (00660000, 033D8000) 25.92 GB
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_fsg_0x18000_0x4000_16_01_2020_20_07_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.0.3; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst1_0x20000_0x4000_16_01_2020_20_07_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.0.3; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst2_0x24000_0x4000_16_01_2020_20_07_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.0.3; FW: 1.24.
Repairing from file "D:/Mobile/!OctoplusProRom/ZTE_Axon_A1_USB.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing DDR partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing dbi partition... Done.
Writing fsg partition... Done.
Writing aboot partition... Done.
Writing fsc partition... Done.
Writing persist partition... Done.
Writing ztelk partition... Done.
Writing misc partition... Done.
Writing keystore partition... Done.
Writing devinfo partition... Done.
Writing ssd partition... Done.
Writing fsc partition... Done.
Writing ztecfg partition... Done.
Writing pad partition... Done.
Writing modem partition... Done.
Writing echarge partition... Done.
Writing splash partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.

Smart Repair is successfully complete.
SW: 2.0.3; FW: 1.24.
Disconnected.
  Reply With Quote
Old 01-21-2020, 13:21   #1050 (permalink)
No Life Poster
 
solusi hp's Avatar
 
Join Date: Apr 2014
Location: west java
Posts: 686
Member: 2162000
Status: Offline
Sonork: 100.1670061
Thanks Meter: 177
oppo a1k lock remove

Oppo A1k remove lock done
Quote:
Model Settings: Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto


Connecting...
Device : Samsung eMMC QD63MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info


CID : 150100514436334D4203D98C6A9A7675
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QD63MB
Product revision : 0.3
Product serial number : (hex) D98C6A9A
Manufacturing date : 07/2019
---------------------------------------------------------------
CSD Info


CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info


Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes


Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit


Boot bus conditions : (0x02) 00000010
Boot bus width : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)


RST_n function : (0x01) RST_n signal is permanently enabled


Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b


Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QD63MB_21_01_2020_19_12_37.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.2; FW: 1.24.
P00: GPT (00000000, 00000040) 32 KB
P01: boot_para (00000040, 00000800) 1024 KB
P02: recovery (00000840, 00010000) 32 MB
P03: para (00010840, 00000400) 512 KB
P04: opporeserve1 (00010C40, 00004000) 8 MB
P05: opporeserve2 (00014C40, 00020000) 64 MB
P06: opporeserve3 (00034C40, 00020000) 64 MB
P07: oppo_custom (00054C40, 00000800) 1024 KB
P08: expdb (00055440, 0000A000) 20 MB
P09: frp (0005F440, 00000800) 1024 KB
P10: vbmeta (0005FC40, 00004000) 8 MB
P11: nvcfg (00063C40, 00010000) 32 MB
P12: nvdata (00073C40, 00020000) 64 MB
P13: metadata (00093C40, 00010000) 32 MB
P14: protect1 (000A3C40, 00004000) 8 MB
P15: protect2 (000A7C40, 000043C0) 8.469 MB
P16: seccfg (000AC000, 00004000) 8 MB
P17: persist (000B0000, 00018000) 48 MB
P18: sec1 (000C8000, 00001000) 2048 KB
P19: proinfo (000C9000, 00001800) 3072 KB
P20: md1img (000CA800, 00032000) 100 MB
P21: spmfw (000FC800, 00000800) 1024 KB
P22: scp1 (000FD000, 00000800) 1024 KB
P23: scp2 (000FD800, 00000800) 1024 KB
P24: sspm_1 (000FE000, 00000800) 1024 KB
P25: sspm_2 (000FE800, 00000800) 1024 KB
P26: gz1 (000FF000, 00008000) 16 MB
P27: gz2 (00107000, 00008000) 16 MB
P28: nvram (0010F000, 00020000) 64 MB
P29: lk (0012F000, 00000800) 1024 KB
P30: lk2 (0012F800, 00000800) 1024 KB
P31: boot (00130000, 00010000) 32 MB
P32: logo (00140000, 00008000) 16 MB
P33: dtbo (00148000, 00008000) 16 MB
P34: tee1 (00150000, 00002800) 5 MB
P35: tee2 (00152800, 00005800) 11 MB
P36: odm (00158000, 00080000) 256 MB
P37: vendor (001D8000, 001CC000) 920 MB
P38: system (003A4000, 00960000) 4.688 GB
P39: cache (00D04000, 000D8000) 432 MB
P40: userdata (00DDC000, 02C447DF) 22.13 GB
P41: otp (03A207DF, 00015800) 43 MB
P42: flashinfo (03A35FDF, 00008000) 16 MB
Backuping nvdata partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QD63MB_nvdata_0x73c40_0x20000_21_01_2020_19_12_37. bin file...
Reading. Please wait... Done.
Elapsed time 00:00:26
SW: 2.0.2; FW: 1.24.
Repairing from file "D:/MEDUSA/Oppo_A1K_CPH1923_RESET_ISP.srf".
Write data verification is enabled.
Writing para partition... Done.
Writing frp partition... Done.


Smart Repair is successfully complete.
SW: 2.0.2; FW: 1.24.
Disconnected.


  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Help with 6110 paulomt1 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 2 05-25-2009 17:29
NHE_8 wont work with NHEK5689.dll v3 steve Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 0 07-23-1999 16:48
HELP: Problem with 5110 Xabi Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 1 07-16-1999 01:44
Netmonitor with FBus???? ratzfatz Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 4 06-09-1999 18:04

 



All times are GMT +1. The time now is 07:52.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.30896 seconds with 9 queries

SEO by vBSEO