unlock huawei 8150 [Solved] - GSM-Forum

hippolyte85 · 02-10-2012, 15:29

after successfully unlock huawei 8150 by writting boot using;

Download HUAWEI_U8150_Boot_Unlocked_by_Ralel.mf from our support site.
Connect Huawei U8150 to Medusa Box Software in Advanced Mode.
Select "Boot only" option, press Write button, and select downloaded boot file.

phon dont av network;

Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: C01B30E1, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.63 V
CPU : Qualcomm MSM7225
Core ID : C01B30E1
Flash device: Micron 512Mb
Flash ID : 002C55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Connect successful.
ECC Mode enabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_U8150_Boot_ Unlocked_by_Ralel.mf" file...
Writting BOOT section. Please wait... Done

how can solved this?

hippolyte85 · 02-10-2012, 18:03

I AV TRIED like forum told without succes

>download & extract u8150 stock t-mobile stock rom
>copy Dload folder to atleast 256 micro sdcard (fat32 format)
>insert micro sdcard to your phone
>hold VOLUME UP + END CALL (RED) + POWER ON KEY

Update failed, i av tried many time with 2GB micro sdcard

hippolyte85 · 02-10-2012, 18:23

i av changed 2gb and use 1gb now all ok very thank to all medusa team

02-10-2012, 15:29	#1 (permalink)
hippolyte85 No Life Poster Join Date: Oct 2006 Location: yaoundé (av kennedy) Posts: 544 Member: 361348 Status: Offline Thanks: 20 Thanked 39 Times in 33 Posts	unlock huawei 8150 [Solved] after successfully unlock huawei 8150 by writting boot using; Download HUAWEI_U8150_Boot_Unlocked_by_Ralel.mf from our support site. Connect Huawei U8150 to Medusa Box Software in Advanced Mode. Select "Boot only" option, press Write button, and select downloaded boot file. phon dont av network; Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: C01B30E1, IR Length = 4. JTAG speed : 1000 KHz. VREF level : 2.63 V CPU : Qualcomm MSM7225 Core ID : C01B30E1 Flash device: Micron 512Mb Flash ID : 002C55BC Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 4096 Flash size : 512 Mb Connect successful. ECC Mode enabled. Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_U8150_Boot_ Unlocked_by_Ralel.mf" file... Writting BOOT section. Please wait... Done how can solved this? Last edited by Medusa Box; 02-11-2012 at 08:53.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	23	09-16-2012 23:57
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	11-29-2010 18:06
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	07-09-1999 22:08

02-10-2012, 18:03	#2 (permalink)
hippolyte85 No Life Poster Join Date: Oct 2006 Location: yaoundé (av kennedy) Posts: 544 Member: 361348 Status: Offline Thanks: 20 Thanked 39 Times in 33 Posts	I AV TRIED like forum told without succes >download & extract u8150 stock t-mobile stock rom >copy Dload folder to atleast 256 micro sdcard (fat32 format) >insert micro sdcard to your phone >hold VOLUME UP + END CALL (RED) + POWER ON KEY Update failed, i av tried many time with 2GB micro sdcard

02-10-2012, 18:23	#3 (permalink)
hippolyte85 No Life Poster Join Date: Oct 2006 Location: yaoundé (av kennedy) Posts: 544 Member: 361348 Status: Offline Thanks: 20 Thanked 39 Times in 33 Posts	i av changed 2gb and use 1gb now all ok very thank to all medusa team