Wildfire S BRICKED [Solved] - GSM-Forum

razvan · 04-21-2012, 13:20

hello,
I managed to repair Wildfire S boot with repair file from support but i am not able to flash any firmware (custom or factory). I allways get message error telling me that the firmware is in phone is newer than the one i want to write.
i allso tried to root it with XTC and i also get error "Pls chk Security flag"

is there any full flash repair?
is there a specific procedure to follow?

any help appreciated.

Medusa Box · 04-23-2012, 05:52

Hello.
At first, please post here full software log with repair procedure and describe the problem with your phone in more details. What was the state of your phone? What firmware You have tried to write? What is the CID of your phone? Have You tried to write Super CID and then write firmaware?

razvan · 05-09-2012, 23:46

as i told you...
i managed to write the repair file from support but now i cannot write any RUU in phone. i get message that the ROM is out of date with an error message. i tried with htcdev.com but i don't know if the repair file from support is for PG76100.
anyway... the phone can ester boot menu by pressing vol - and power. now axplain me what to do next.
thank you!

razvan · 05-10-2012, 01:11

I am stuck with HBoot version 0.90.00 and whathever i do i receive error 191 when i'm trying to updare the RUU...

Medusa Box · 05-10-2012, 05:56

What is the CID of your phone? Have You tried to write Super CID and then write firmaware?

razvan · 05-10-2012, 08:45

the phone is S-ON. I tried with Goldcard created with XTC but i cannot root the phone.
the phone don't power on, it only enter bootloader so i don't figure a way how to read CID.

razvan · 05-10-2012, 10:57

i cannot S-OFF with XTC. i tried with multiple sd cards and i allways get errors.
"Get OEMSBL time out!
Pls check Security flag"

Medusa Box · 05-10-2012, 12:15

What CID You have written during of Repair process? Please post here full software log with Repair procedure. Also, try to repair the phone again and enter CID "11111111".

razvan · 05-11-2012, 21:59

Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.59 V
CPU : Qualcomm MSM7227T
Core ID : 203C10E1
Flash device: Samsung 512Mb
Flash ID : 00EC66BC
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
HTC CID : HTC__001
IMEI : 355430-04-655423
Opening "D:\GSM\Devices\Medusa\HTC_WILDFIRES_Repair.mf " file...
Writting BOOT section. Please wait... Done
Writting APPBOOT section. Please wait... Done
Repairing CID and IMEI... Done
Disconnected
Repair done.

Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.59 V
CPU : Qualcomm MSM7227T
Core ID : 203C10E1
Flash device: Samsung 512Mb
Flash ID : 00EC66BC
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
HTC CID : 11111111
IMEI : 355430-04-655423
Connect successful.
Rading codes. Please wait...
Active lock codes not found.
Done
Write protection disabled.

razvan · 05-11-2012, 22:00

again... i cannot S-OFF with XTC and i cannot write any firmware... i think i'm going crazy...

razvan · 05-11-2012, 23:30

can you add on to support a full repair file? thank you!

razvan · 05-12-2012, 07:43

i have tried with 2 XTC clips and finally i soldered wires thinking that the ribbon is not touching the sim contacts, but nothing...
"Get OEMSBL time out!
Pls check Security flag"
i cannot S-OFF and i cannot revive the phone...
i can't write any RUU from computer or sd card...

razvan · 05-12-2012, 15:18

can somebody provide a full procedure how to revive this phone after boot repait?

Medusa Box · 05-14-2012, 09:15

Please try to write Full flash we have sent You to your PM and write here the result.

razvan · 05-14-2012, 20:46

Thank you! finally problem solved and phone is now allive. you should put this file to support.

04-21-2012, 13:20	#1 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	Wildfire S BRICKED [Solved] hello, I managed to repair Wildfire S boot with repair file from support but i am not able to flash any firmware (custom or factory). I allways get message error telling me that the firmware is in phone is newer than the one i want to write. i allso tried to root it with XTC and i also get error "Pls chk Security flag" is there any full flash repair? is there a specific procedure to follow? any help appreciated. Last edited by Medusa Box; 05-15-2012 at 05:31.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Sharp 903SH Bricked - Help Requested	kooty-sentinel	Sharp	0	02-23-2006 23:59
How to upgrade BT F/W in DiNovo brick?	olmari	Bluetooth-Software	0	02-17-2005 21:25
T720 bricked	sarajevo	P2k Series	9	04-27-2004 00:41
i need some old brick phones	technogen1	Wanted Products	0	06-30-2003 21:55
A little help in a brick phone..	fontelense	Siemens-Benq RingTones and WallPapers	1	05-20-2003 18:15

04-23-2012, 05:52	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Hello. At first, please post here full software log with repair procedure and describe the problem with your phone in more details. What was the state of your phone? What firmware You have tried to write? What is the CID of your phone? Have You tried to write Super CID and then write firmaware?

05-09-2012, 23:46	#3 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	as i told you... i managed to write the repair file from support but now i cannot write any RUU in phone. i get message that the ROM is out of date with an error message. i tried with htcdev.com but i don't know if the repair file from support is for PG76100. anyway... the phone can ester boot menu by pressing vol - and power. now axplain me what to do next. thank you!

05-10-2012, 01:11	#4 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	I am stuck with HBoot version 0.90.00 and whathever i do i receive error 191 when i'm trying to updare the RUU...

05-10-2012, 05:56	#5 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	What is the CID of your phone? Have You tried to write Super CID and then write firmaware?

05-10-2012, 08:45	#6 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	the phone is S-ON. I tried with Goldcard created with XTC but i cannot root the phone. the phone don't power on, it only enter bootloader so i don't figure a way how to read CID.

05-10-2012, 10:57	#7 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	i cannot S-OFF with XTC. i tried with multiple sd cards and i allways get errors. "Get OEMSBL time out! Pls check Security flag"

05-10-2012, 12:15	#8 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	What CID You have written during of Repair process? Please post here full software log with Repair procedure. Also, try to repair the phone again and enter CID "11111111".

05-11-2012, 21:59	#9 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C10E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.59 V CPU : Qualcomm MSM7227T Core ID : 203C10E1 Flash device: Samsung 512Mb Flash ID : 00EC66BC Page size : 4096 bytes Block size : 64 pages (256 Kb) Block count: 2048 Flash size : 512 Mb HTC CID : HTC__001 IMEI : 355430-04-655423 Opening "D:\GSM\Devices\Medusa\HTC_WILDFIRES_Repair.mf " file... Writting BOOT section. Please wait... Done Writting APPBOOT section. Please wait... Done Repairing CID and IMEI... Done Disconnected Repair done. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C10E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.59 V CPU : Qualcomm MSM7227T Core ID : 203C10E1 Flash device: Samsung 512Mb Flash ID : 00EC66BC Page size : 4096 bytes Block size : 64 pages (256 Kb) Block count: 2048 Flash size : 512 Mb HTC CID : 11111111 IMEI : 355430-04-655423 Connect successful. Rading codes. Please wait... Active lock codes not found. Done Write protection disabled.

05-11-2012, 22:00	#10 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	again... i cannot S-OFF with XTC and i cannot write any firmware... i think i'm going crazy...

05-11-2012, 23:30	#11 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	can you add on to support a full repair file? thank you!

05-12-2012, 07:43	#12 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	i have tried with 2 XTC clips and finally i soldered wires thinking that the ribbon is not touching the sim contacts, but nothing... "Get OEMSBL time out! Pls check Security flag" i cannot S-OFF and i cannot revive the phone... i can't write any RUU from computer or sd card...

05-12-2012, 15:18	#13 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	can somebody provide a full procedure how to revive this phone after boot repait?

05-14-2012, 09:15	#14 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Please try to write Full flash we have sent You to your PM and write here the result.

05-14-2012, 20:46	#15 (permalink)
razvan Freak Poster Join Date: Aug 2001 Location: on air Age: 35 Posts: 415 Member: 5921 Status: Offline Thanks: 1 Thanked 4 Times in 2 Posts	Thank you! finally problem solved and phone is now allive. you should put this file to support.