wildfire s marvel s510a - GSM-Forum

ktre · 05-20-2012, 02:34

repair imei and unlocking it and stayed in the logo. I did not know he had to create a goldcard before doing this and now does not fit any firmware. How do I get from the fastboot started to make this htc? The fullflash already started loading and then not read the cel. I'm lost in the universe HTC. Some help please.

regars

ktre · 05-20-2012, 04:41

when you flash a RUU_marvel is in "updating radio" there is no more

Medusa Box · 05-21-2012, 06:11

Hello.
Please explain the problem in more details, step by step. What was the state of your phone? What actions You have performed? Please post here full software log with all of your actions.

ktre · 05-21-2012, 06:52

Quote:

Originally Posted by Medusa Box

Hello.
Please explain the problem in more details, step by step. What was the state of your phone? What actions You have performed? Please post here full software log with all of your actions.

make it simple. The computer was working perfectly and I did the process of repair IMEI and CID. When I stay powered ON only in fastboot mode. Do not flash backup, do not create goldcard. I'm with the imei, unlock cid and cel code but does not work more than fastboot mode, I do not work on recovery. We probe different ROMs and all stop when updates "radio".

¿How do I turn on the phone again?

Medusa Box · 05-21-2012, 06:57

What is revision of your wildfire s? PG76100 or another?

ktre · 05-21-2012, 15:17

Quote:

Originally Posted by Medusa Box

What is revision of your wildfire s? PG76100 or another?

my wildfire s is PG76100 s510a marvel, of the company "personal" from Argentina

Medusa Box · 05-21-2012, 15:34

Please make Repair again and post here full software log.

ktre · 05-21-2012, 15:54

this is the last repair

Code:

Selected device model: HTC Wildfire S (PG76100)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed  : Auto (RTCK).
VREF level  : 2.59 V
CPU         : Qualcomm MSM7227T
Core ID     : 203C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID    : 00AD55BC
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 4096
 Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
Opening "C:\Documents and Settings\Administrador\Escritorio\htc\medusa\archivos para reparar wildfire\a medias\HTC_WILDFIRES_Repair.mf" file...
Writting BOOT2 section. Please wait... Done
Writting APPBOOT2 section. Please wait... Done
Repairing CID and IMEI... Done
Disconnected
Repair done.
Selected device model: HTC Wildfire S (PG76100)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed  : Auto (RTCK).
VREF level  : 2.59 V
CPU         : Qualcomm MSM7227T
Core ID     : 203C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID    : 00AD55BC
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 4096
 Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID     : 11111111
IMEI        : 350005-10-898411
Connect successful.
ECC Mode enabled.
ECC Mode disabled.
Write protection disabled.
Rading codes. Please wait...
NCK  Code   : 64637832
Done

Medusa Box · 05-21-2012, 15:59

Try to write Full flash.

ktre · 05-21-2012, 16:09

Quote:

Originally Posted by Medusa Box

Try to write Full flash.

Code:

Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed  : Auto (RTCK).
VREF level  : 2.59 V
CPU         : Qualcomm MSM7227T
Core ID     : 203C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID    : 00AD55BC
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 4096
 Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID     : 11111111
IMEI        : 350005-10-898411
Connect successful.
Rading codes. Please wait...
NCK  Code   : 64637832
Done
Write protection disabled.
ECC Mode enabled.
Opening "C:\Documents and Settings\Administrador\Escritorio\htc\medusa\archivos para reparar wildfire\full\HTC_WILDFIRES_FullFlash_4K.mf" file...
Writting BOOT section. Please wait... Done
Disconnected
Selected device model: HTC Wildfire S (PG76100)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed  : Auto (RTCK).
VREF level  : 2.59 V
CPU         : Qualcomm MSM7227T
Core ID     : 203C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID    : 00AD55BC
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 4096
 Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
Connect successful.
Rading codes. Please wait...
ERROR[038]: HTC security partition not found or damaged. Please make sure that You selected correct device model, do EasyRepair to rebuild security.
Disconnected
Selected device model: HTC Wildfire S (PG76100)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed  : Auto (RTCK).
VREF level  : 2.59 V
CPU         : Qualcomm MSM7227T
Core ID     : 203C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID    : 00AD55BC
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 4096
 Flash size : 512 Mb

as I throw this error "ERROR [038]: HTC security not found or damaged partition. Please make sure That You selected correct device model, do EasyRepair to rebuild security." I went back to repair

¿easy repair after I pass the test if full flash and turn on even if I read the box?

ktre · 05-21-2012, 16:11

what I miss is assembling the test cell above that putting a full flash rom RUU_marvel

Medusa Box · 05-21-2012, 16:17

Connect the phone in Advanced Mode and write Full flash.

ktre · 05-21-2012, 16:30

Quote:

Originally Posted by Medusa Box

Connect the phone in Advanced Mode and write Full flash.

I have already done and complete the process and when I went back to connect not read me the phone had to go back to fix it, did I try again? read the log above

Medusa Box · 05-21-2012, 16:43

What done? As I see You have written only phone's boot:

Quote:

ECC Mode enabled.
Opening "C:\Documents and Settings\Administrador\Escritorio\htc\medusa\archi vos para reparar wildfire\full\HTC_WILDFIRES_FullFlash_4K.mf" file...
Writting BOOT section. Please wait... Done
Disconnected

Please write full flash!

ktre · 05-21-2012, 16:52

Code:

Selected device model: HTC Wildfire S (PG76100)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed  : Auto (RTCK).
VREF level  : 2.59 V
CPU         : Qualcomm MSM7227T
Core ID     : 203C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID    : 00AD55BC
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 4096
 Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID     : 11111111
IMEI        : 350005-10-898411
Connect successful.
ECC Mode enabled.
Opening "C:\Documents and Settings\Administrador\Escritorio\htc\medusa\archivos para reparar wildfire\full\HTC_WILDFIRES_FullFlash_4K.mf" file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait... Done
Rading codes. Please wait...
ERROR[038]: HTC security partition not found or damaged. Please make sure that You selected correct device model, do EasyRepair to rebuild security.
Disconnected

I did above and hit him part of the log

05-20-2012, 02:34	#1 (permalink)
ktre Freak Poster Join Date: Dec 2008 Posts: 111 Member: 930014 Status: Offline Sonork: Uk Thanks: 10 Thanked 9 Times in 8 Posts	wildfire s marvel s510a repair imei and unlocking it and stayed in the logo. I did not know he had to create a goldcard before doing this and now does not fit any firmware. How do I get from the fastboot started to make this htc? The fullflash already started loading and then not read the cel. I'm lost in the universe HTC. Some help please. regars

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Marvel Legends Transformers Crossovers - Hulk	IPMART	ipmart WebShop	0	09-15-2008 15:00
Marvel Legends Transformers Crossovers - Spiderman	IPMART	ipmart WebShop	0	09-15-2008 15:00
Marvellous Functions Of Mctool	DUNIYA JAMAL	MC-Tool	4	06-19-2008 07:42
Mforma Marvel X-MEN 3 The Last Stand v0.6.2 S60 J2Me	sam2sim	Nokia Multimedia	1	06-05-2006 10:58
marvel	Marvel	ODM (Original Design Manufacturing)	2	10-03-2005 14:10

05-20-2012, 04:41	#2 (permalink)
ktre Freak Poster Join Date: Dec 2008 Posts: 111 Member: 930014 Status: Offline Sonork: Uk Thanks: 10 Thanked 9 Times in 8 Posts	when you flash a RUU_marvel is in "updating radio" there is no more

05-21-2012, 06:11	#3 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Hello. Please explain the problem in more details, step by step. What was the state of your phone? What actions You have performed? Please post here full software log with all of your actions.

05-21-2012, 06:57	#5 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	What is revision of your wildfire s? PG76100 or another?

05-21-2012, 15:34	#7 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Please make Repair again and post here full software log.

05-21-2012, 15:59	#9 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Try to write Full flash.

05-21-2012, 16:11	#11 (permalink)
ktre Freak Poster Join Date: Dec 2008 Posts: 111 Member: 930014 Status: Offline Sonork: Uk Thanks: 10 Thanked 9 Times in 8 Posts	what I miss is assembling the test cell above that putting a full flash rom RUU_marvel

05-21-2012, 16:17	#12 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Connect the phone in Advanced Mode and write Full flash.