ZTE F160 problem - GSM-Forum

zaskar · 07-20-2012, 05:56

Welcome to Medusa Box Software version 1.5.0.1
Selected device model: ZTE F160
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 4015F0E1, IR Length = 4.
ERROR[016]: Selected device CPU ID mismatch. Core ID = 4015F0E1, expected ID = 4015E0E1.

Medusa Box · 07-20-2012, 08:37

Hello.
We will prepare test version and contact You.

Medusa Box · 07-20-2012, 09:41

Please check your PM for Beta.

zaskar · 07-20-2012, 12:22

Welcome to Medusa Box Software version 1.5.0.5T
Selected device model: Auto
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 4015F0E1, IR Length = 4.
ERROR[010]: Unsupported device CPU. Core ID = 4015F0E1.
Selected device model: ZTE F160
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 4015F0E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 1.77 V
CPU : Qualcomm QSC6270
Core ID : 4015F0E1
Flash device: Hynix H8BCS0QG0MMR
Flash ID : 00AD00B1
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 1024
Flash size : 128 Mb
Connect successful.

THX A LOT

I'm going to repair my phone...

zaskar · 07-20-2012, 13:51

After full flash....

Phone is power on and stuck on logo.
Disconnected

Medusa Box · 07-20-2012, 13:54

Have You made Erase Full Flash before of writing Full Flash?

zaskar · 07-20-2012, 13:59

I just used "easy repair".

Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 4015F0E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 1.77 V
CPU : Qualcomm QSC6270
Core ID : 4015F0E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0x0000ADB1.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 0000007F
Flash device: Hynix H8BCS0QG0MMR
Flash ID : 00AD00B1
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 1024
Flash size : 128 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\ZTE_F160_Repair.mf " file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait... Done
Disconnected

Now phone is alive but hang on at^t logo

zaskar · 07-20-2012, 14:12

tried full erase

Selected device model: ZTE F160
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 4015F0E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 1.77 V
CPU : Qualcomm QSC6270
Core ID : 4015F0E1
Flash device: Hynix H8BCS0QG0MMR
Flash ID : 00AD00B1
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 1024
Flash size : 128 Mb
Connect successful.
ECC Mode enabled.
Erasing BOOT section. Please wait...
ERROR[015]: Block operation failed. Block 0.
Disconnected

zaskar · 07-20-2012, 14:15

ok

Connect successful.
ECC Mode enabled.
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done

now i will try write full flash in advanced mode....

lets seee

zaskar · 07-20-2012, 15:03

I made erase and then full flash but phone still hang on logo

Have you got any other flash file?

Maybe there is possible to flash it with any other tool?

Medusa Box · 07-20-2012, 15:41

Yes, most likely You need Full Flash from another device with CORE ID 4015F0E1. Unfortunately, we have no such Full Flash.

zaskar · 07-20-2012, 15:43

ok - i try to find another one - it is from orange pl.
If sb have Atlanta from orange pl - please read full flash and post it here.

zaskar · 07-23-2012, 13:35

OK - i found dump file but for other box

is there any chance to convert it and use with medusa?

07-20-2012, 05:56	#1 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	ZTE F160 problem Welcome to Medusa Box Software version 1.5.0.1 Selected device model: ZTE F160 Connecting. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 4015F0E1, IR Length = 4. ERROR[016]: Selected device CPU ID mismatch. Core ID = 4015F0E1, expected ID = 4015E0E1.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Sim card sleep mode problem with 6130	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	05-22-2012 11:13
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	10-18-2006 15:21
6110 5.47 sw unlock problem	gsms	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	11-21-1999 18:43
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	09-11-1999 17:39
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	07-16-1999 00:44

07-20-2012, 08:37	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Hello. We will prepare test version and contact You.

07-20-2012, 09:41	#3 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Please check your PM for Beta.

07-20-2012, 12:22	#4 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	Welcome to Medusa Box Software version 1.5.0.5T Selected device model: Auto Connecting. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 4015F0E1, IR Length = 4. ERROR[010]: Unsupported device CPU. Core ID = 4015F0E1. Selected device model: ZTE F160 Connecting. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 4015F0E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 1.77 V CPU : Qualcomm QSC6270 Core ID : 4015F0E1 Flash device: Hynix H8BCS0QG0MMR Flash ID : 00AD00B1 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 1024 Flash size : 128 Mb Connect successful. THX A LOT I'm going to repair my phone...

07-20-2012, 13:51	#5 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	After full flash.... Phone is power on and stuck on logo. Disconnected

07-20-2012, 13:54	#6 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Have You made Erase Full Flash before of writing Full Flash?

07-20-2012, 13:59	#7 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	I just used "easy repair". Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 4015F0E1, IR Length = 4. MI: Halting target, attempt 1. JTAG speed : Auto (RTCK). VREF level : 1.77 V CPU : Qualcomm QSC6270 Core ID : 4015F0E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0x0000F00F, cycle 0. MI: Received server capabilities 0x0000007F. MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW MI: Watchdog configuration: 0xB800010C, 0x00000001... ok MI: Server init. MI: Received flash ID 0x0000ADB1. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 0000007F Flash device: Hynix H8BCS0QG0MMR Flash ID : 00AD00B1 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 1024 Flash size : 128 Mb MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D MI: Configuration done. Opening "C:\Program Files\GsmServer\Medusa\Firmware\ZTE_F160_Repair.mf " file... Writting BOOT section. Please wait... Done Writting FIRMWARE section. Please wait... Done Disconnected Now phone is alive but hang on at^t logo

07-20-2012, 14:12	#8 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	tried full erase Selected device model: ZTE F160 Connecting. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 4015F0E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 1.77 V CPU : Qualcomm QSC6270 Core ID : 4015F0E1 Flash device: Hynix H8BCS0QG0MMR Flash ID : 00AD00B1 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 1024 Flash size : 128 Mb Connect successful. ECC Mode enabled. Erasing BOOT section. Please wait... ERROR[015]: Block operation failed. Block 0. Disconnected

07-20-2012, 14:15	#9 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	ok Connect successful. ECC Mode enabled. Erasing BOOT section. Please wait... Done Erasing FIRMWARE section. Please wait... Done now i will try write full flash in advanced mode.... lets seee

07-20-2012, 15:03	#10 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	I made erase and then full flash but phone still hang on logo Have you got any other flash file? Maybe there is possible to flash it with any other tool?

07-20-2012, 15:41	#11 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Yes, most likely You need Full Flash from another device with CORE ID 4015F0E1. Unfortunately, we have no such Full Flash.

07-20-2012, 15:43	#12 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	ok - i try to find another one - it is from orange pl. If sb have Atlanta from orange pl - please read full flash and post it here.

07-23-2012, 13:35	#13 (permalink)
zaskar Freak Poster Join Date: Apr 2004 Posts: 380 Member: 60746 Status: Offline Thanks: 14 Thanked 17 Times in 13 Posts	OK - i found dump file but for other box is there any chance to convert it and use with medusa?