I9003 dead-boot help - GSM-Forum

rkinfo_khan · 07-31-2013, 04:01

hi

team

i got i9003 with null imei , so i tried writing efs file and tried writing full dump from other jtag , i got error in between and the set is now dead . iconnected it with ort-jtag ,here also iam getting error

this si the log

Device is connected
Vref:1.860V
TCK:06MHz
Model:AutoModel
omap.tap,pos:0,IRLength:4,DeviceID:0x0B6D6020.
omap.tap,pos:1,IRLength:6,DeviceID:0x2B89102F.
Scan CPU failed(-4)
Vref:1.860V
TCK:06MHz
Model:AutoModel
omap.tap,pos:0,IRLength:4,DeviceID:0x0B6D6020.
omap.tap,pos:1,IRLength:6,DeviceID:0x2B89102F.
Scan CPU failed(-4)

can anybody guide me to revive the handset

jatchaminda · 07-31-2013, 04:33

set tck to rtck then scan

rkinfo_khan · 07-31-2013, 05:03

same problem sir . i tried it

**Electroboys** · 07-31-2013, 06:58

You should make a boot card first !
see the manual in support page ,

Best Regards

rkinfo_khan · 07-31-2013, 10:39

steps followed

1. downloaded sdboot-file, win32dskmangr , repair guide
2.created sdboot-card
3 but still iam getting error

07-31-2013, 04:01	#1 (permalink)
rkinfo_khan No Life Poster Join Date: Feb 2009 Age: 43 Posts: 838 Member: 978268 Status: Offline Thanks Meter: 83	I9003 dead-boot help hi team i got i9003 with null imei , so i tried writing efs file and tried writing full dump from other jtag , i got error in between and the set is now dead . iconnected it with ort-jtag ,here also iam getting error this si the log Device is connected Vref:1.860V TCK:06MHz Model:AutoModel omap.tap,pos:0,IRLength:4,DeviceID:0x0B6D6020. omap.tap,pos:1,IRLength:6,DeviceID:0x2B89102F. Scan CPU failed(-4) Vref:1.860V TCK:06MHz Model:AutoModel omap.tap,pos:0,IRLength:4,DeviceID:0x0B6D6020. omap.tap,pos:1,IRLength:6,DeviceID:0x2B89102F. Scan CPU failed(-4) can anybody guide me to revive the handset

07-31-2013, 04:33	#2 (permalink)
jatchaminda No Life Poster Join Date: Dec 2007 Location: Maharagama, Srilanka Posts: 2,086 Member: 661090 Status: Offline Sonork: 100.1616818 Thanks Meter: 541	set tck to rtck then scan

07-31-2013, 05:03	#3 (permalink)
rkinfo_khan No Life Poster Join Date: Feb 2009 Age: 43 Posts: 838 Member: 978268 Status: Offline Thanks Meter: 83	same problem sir . i tried it

07-31-2013, 06:58	#4 (permalink)
Electroboys Product Manager Join Date: Oct 2001 Location: GSMFABRICA Age: 43 Posts: 2,711 Member: 6594 Status: Offline Sonork: 100.27285 Thanks Meter: 22,500	You should make a boot card first ! see the manual in support page , Best Regards

07-31-2013, 10:39	#5 (permalink)
rkinfo_khan No Life Poster Join Date: Feb 2009 Age: 43 Posts: 838 Member: 978268 Status: Offline Thanks Meter: 83	steps followed 1. downloaded sdboot-file, win32dskmangr , repair guide 2.created sdboot-card 3 but still iam getting error