Asus FE170CG_K012 problem in repair log and how fix it? - GSM-Forum

CoMoBat · 11-01-2018, 15:05

I want program 3GMR emmc for Asus FE170CG_K012 by easy dump file

easy give me bellow log:

Code:

---------- eMMC Device Information ----------

eMMC CID : 90014A48384732640404007BC21280E4
eMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 08/2013  Rev.0x4
eMMC NAME: H8G2d  , S/N:    8110610
eMMC NAME (HEX): 483847326420 
EMMC ROM1 (Main User Data)   Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x06 , width 8bits  , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H8G2d _   8110610_20181101_1704.extcsd
Caution: invalid backup GPT header, but valid main header!
Warning! Main and backup partition tables differ!n
Warning! One or more CRCs don't match. You should repair the disk!
Partition table scan:
 GPT: damaged
Caution: Found protective or hybrid MBR and corrupt GPT.
Real (Hardware) Disk/Image size: E90000 sectors 7.3 GiB 
Soft (Partitioned) Disk/Image size: E8BFBC sectors 7.3 GiB 
Logical sector size: 0x200  bytes
Disk identifier (GUID): 096FC29F-29A3-CAA8-AE3B-686E70C5E401
First usable sector: 34
Last usable sector: 15253470
Found Data areas (firmware parts) count is: 10 
Partition info successfully found
---------------------------------------------
P0 (RESERVED) [0x4400 0x2f00000] Size: 47.0MB
P1 (PANIC) [0x2f04400 0x800000] Size: 8.0MB
P2 (FACTORY) [0x3704400 0x200000] Size: 2.0MB
P3 (CONFIG) [0x3904400 0x1500000] Size: 21.0MB
P4 (GAUGE) [0x4e04400 0x100000] Size: 1.0MB
P5 (FIRMWARE) [0x4f04400 0x1500000] Size: 21.0MB
P6 (ADF) [0x6404400 0x2000000] Size: 32.0MB
P7 (CACHE) [0x8404400 0x1a200000] Size: 418.0MB
P8 (SYSTEM) [0x22604400 0x48800000] Size: 1.132GB
P9 (DATA) [0x6ae04400 0x1661fbc00] Size: 5.594GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0022604400 (1.132GB)
Build ID:  KVT49L
Display Build ID:  KVT49L.WW_fonepad-11.2.3.33-20150302 release-keys
Release ID:  4.4.2
Device Model:  K012
Device Name:  WW_fonepad
Architecture ABI:  x86
Device manufacturer:  asus
Device Platform:  clovertrail
Product ID:  K012
Build Description:  WW_fonepad-user 4.4.2 KVT49L WW_fonepad-11.2.3.33-20150302 release-keys
---------------------------------------------
Done.

How can I fix it by easy jtag?

And how config this emmc for "Asus FE170CG_K012"

this info is from worked device:

Code:

Setting frequence to 21 Mhz
CMD Pullup Level: 2103 mV
CMD Active Level: 2165 mV
EMMC Device Information :
EMMC CID: 90014A483847326404050114C1FF4150
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G2d , HEX: 483847326400 , S/N: 0114C1FF , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
   EMMC ROM 1 (Main User Data) Capacity: 7448 MB (0001D1800000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
   EMMC GP1 (GP Partition 1) Capacity: 8 MB   , WR_REL (000000800000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x06 , width 8bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G2d_0114C1FF_20181102_130417.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: reserved, [000000004400 - 000002F04400], size: 000002F00000 (47.0 MB)
Partition: panic, [000002F04400 - 000003704400], size: 000000800000 (8.00 MB)
Partition: factory, [000003704400 - 000003904400], size: 000000200000 (2.00 MB)
Partition: config, [000003904400 - 000004E04400], size: 000001500000 (21.0 MB)
Partition: gauge, [000004E04400 - 000004F04400], size: 000000100000 (1.00 MB)
Partition: firmware, [000004F04400 - 000006404400], size: 000001500000 (21.0 MB)
Partition: ADF, [000006404400 - 000008404400], size: 000002000000 (32.0 MB)
Partition: cache, [000008404400 - 000022604400], size: 00001A200000 (418. MB)
Partition: system, [000022604400 - 00006AE04400], size: 000048800000 (1.13 GB)
Partition: data, [00006AE04400 - 0001D1000000], size: 0001661FBC00 (5.60 GB)
GPT header successfully parsed

Get firmware version

Brand = asus
Manufacturer = asus
Model = K012
Phone platform = clovertrail
CPU Abi = x86
Android release = 4.3
Firmware version = JSS15Q.WW_fonepad-10.32.1.31.2-20140721,release-keys
Firmware date = Mon Jul 21 17:01:05 CST 2014

how can I config new emmc like as this one?

iI try to create GP1 partion by easy plus and give me bellow log:

Code:

Operation: Changing GP sizes (final write) ...

GP1 size: 8 MB , WR_REL: 1 , ENH 1
GP2 size: 0 MB , WR_REL: 1 , ENH 0
GP3 size: 0 MB , WR_REL: 1 , ENH 0
GP4 size: 0 MB , WR_REL: 1 , ENH 0

HW_PART error. Reason: Card already partitioned

I try to write GP1 dump and give me this log:

Code:

Operation: Write Dump

The value of the start address is greater than the size of GP1

how can I fix it?

this log is for worked emmc for write GP1 :

Code:

Operation: Write Dump

Writing to: GP1 , start: 0x000000000000 , size: 0x000000800000
Input file: C:\Users\Mehregan\Desktop\EMMC_H8G2d_GP1__000000000000_000000800000.bin
eMMC switching to GP1
Writing partition...
Done writing partition. Write speed: 240.53 KB/s

All done   time: [00:00:34:429]

But give error for that emmc!

layder · 11-02-2018, 11:55

Quote:

Originally Posted by CoMoBat

I want program 3GMR emmc for Asus FE170CG_K012 by easy dump file

Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01

how can I config new emmc like as this one?

iI try to create GP1 partion by easy plus and give me bellow log:

Code:

Operation: Changing GP sizes (final write) ...

GP1 size: 8 MB , WR_REL: 1 , ENH 1
GP2 size: 0 MB , WR_REL: 1 , ENH 0
GP3 size: 0 MB , WR_REL: 1 , ENH 0
GP4 size: 0 MB , WR_REL: 1 , ENH 0

HW_PART error. Reason: Card already partitioned

But give error for that emmc!

GP1 partition can create at eMMC with [PARTITION_SETTING_COMPLETED]=0x00.
It's one time program (OTP) bit

After GPx configured, [PARTITION_SETTING_COMPLETED] bit is set to 0x01

Use new eMMC with [PARTITION_SETTING_COMPLETED]=0x00 to restore you device

CoMoBat · 11-02-2018, 12:19

Quote:

Originally Posted by layder

GP1 partition can create at eMMC with [PARTITION_SETTING_COMPLETED]=0x00.
It's one time program (OTP) bit

After GPx configured, [PARTITION_SETTING_COMPLETED] bit is set to 0x01

Use new eMMC with [PARTITION_SETTING_COMPLETED]=0x00 to restore you device

thanks so much for replay

But in the first log :

Code:

---------- eMMC Device Information ----------

eMMC CID : 90014A48384732640404007BC21280E4
eMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 08/2013  Rev.0x4
eMMC NAME: H8G2d  , S/N:    8110610
eMMC NAME (HEX): 483847326420 
EMMC ROM1 (Main User Data)   Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x06 , width 8bits  , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H8G2d _   8110610_20181101_1704.extcsd
Caution: invalid backup GPT header, but valid main header!
Warning! Main and backup partition tables differ!n
Warning! One or more CRCs don't match. You should repair the disk!
Partition table scan:
 GPT: damaged
Caution: Found protective or hybrid MBR and corrupt GPT.
Real (Hardware) Disk/Image size: E90000 sectors 7.3 GiB 
Soft (Partitioned) Disk/Image size: E8BFBC sectors 7.3 GiB 
Logical sector size: 0x200  bytes
Disk identifier (GUID): 096FC29F-29A3-CAA8-AE3B-686E70C5E401
First usable sector: 34
Last usable sector: 15253470
Found Data areas (firmware parts) count is: 10 
Partition info successfully found
---------------------------------------------
P0 (RESERVED) [0x4400 0x2f00000] Size: 47.0MB
P1 (PANIC) [0x2f04400 0x800000] Size: 8.0MB
P2 (FACTORY) [0x3704400 0x200000] Size: 2.0MB
P3 (CONFIG) [0x3904400 0x1500000] Size: 21.0MB
P4 (GAUGE) [0x4e04400 0x100000] Size: 1.0MB
P5 (FIRMWARE) [0x4f04400 0x1500000] Size: 21.0MB
P6 (ADF) [0x6404400 0x2000000] Size: 32.0MB
P7 (CACHE) [0x8404400 0x1a200000] Size: 418.0MB
P8 (SYSTEM) [0x22604400 0x48800000] Size: 1.132GB
P9 (DATA) [0x6ae04400 0x1661fbc00] Size: 5.594GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0022604400 (1.132GB)
Build ID:  KVT49L
Display Build ID:  KVT49L.WW_fonepad-11.2.3.33-20150302 release-keys
Release ID:  4.4.2
Device Model:  K012
Device Name:  WW_fonepad
Architecture ABI:  x86
Device manufacturer:  asus
Device Platform:  clovertrail
Product ID:  K012
Build Description:  WW_fonepad-user 4.4.2 KVT49L WW_fonepad-11.2.3.33-20150302 release-keys
---------------------------------------------
Done.

this log have "Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00"

Its mean I can change GPx for one time because partion bit is "0x00"

and when I want create GP1 give me:
HW_PART error. Reason: Card already partitioned

and when I want write GP1 dump give me :

Operation: Write Dump

The value of the start address is greater than the size of GP1

How can I write GP1 dump on this emmc?

layder · 11-02-2018, 12:41

Quote:

Originally Posted by CoMoBat

thanks so much for replay

But in the first log :

Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

and when I want create GP1 give me:
HW_PART error. Reason: Card already partitioned

and when I want write GP1 dump give me :

You can't write GP1 to missing GP1

post full logs of you operations as file from Log folder of program to analize it

CoMoBat · 11-02-2018, 12:43

Quote:

Originally Posted by layder

You can't write GP1 to missing GP1

post full logs of you operations as file from Log folder of program to analize it

I'm at home
I'll Send it tommarow

Thanks

Quote:

Originally Posted by layder

You can't write GP1 to missing GP1

post full logs of you operations as file from Log folder of program to analize it

this is log from scan,write full dump,create GP1 and write GP1 dump:

Code:

http://www.mediafire.com/file/lll1gn1cpfgeze3/eMMC_Tool_Log_1.5.2.0_20181103_095341.zip/file****************************/file/lll1gn1cpfgeze3/eMMC_Tool_Log_1.5.2.0_20181103_095341.zip/file****************************/file/lll1gn1cpfgeze3/eMMC_Tool_Log_1.5.2.0_20181103_095341.zip/file****************************/file/lll1gn1cpfgeze3/eMMC_Tool_Log_1.5.2.0_20181103_095341.zip/file

layder · 11-03-2018, 09:40

I see "Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01" at begin of log
Post previous log, where are "Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00"

CoMoBat · 11-03-2018, 10:55

Quote:

Originally Posted by layder

I see "Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01" at begin of log
Post previous log, where are "Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00"

yes you are right

So now how can see GPx partions size and check them?

layder · 11-03-2018, 12:08

Quote:

Originally Posted by CoMoBat

yes you are right

So now how can see GPx partions size and check them?

If GP partition found - info adout it found at detect

ali_imran · 11-03-2018, 20:48

today k012 done with 16 gb emmc

CoMoBat · 11-04-2018, 07:40

Quote:

Originally Posted by ali_imran

today k012 done with 16 gb emmc

can you share his emmc info?

miladmt66 · 11-05-2018, 05:16

can you explain step by step ebout gp partition??

Sent from my Nokia 2 using Tapatalk

ali_imran · 11-06-2018, 07:24

EMMC ROM 1 7448 MB (0001D1800000)
EMMC ROM 2/3 4096 KB (000000400000)
EMMC RPMB 4096 KB (000000400000)
EMMC GP1 for kmvtu000lm-b503 40mb
use kmvtu000lm-b503
1st format
2nd gpt
3rd write dump
after write dump u can flash via many tool

11-03-2018, 09:40	#6 (permalink)
layder Product Supporter Join Date: Jun 2002 Location: Belarus Age: 47 Posts: 3,188 Member: 13148 Status: Offline Thanks Meter: 2,948	I see "Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01" at begin of log Post previous log, where are "Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00"

11-03-2018, 20:48	#9 (permalink)
ali_imran No Life Poster Join Date: Apr 2007 Location: India Posts: 1,998 Member: 481609 Status: Offline Sonork: 100.1659889 Thanks Meter: 367	today k012 done with 16 gb emmc

11-05-2018, 05:16	#11 (permalink)
miladmt66 Freak Poster Join Date: Aug 2010 Location: iran Posts: 135 Member: 1368525 Status: Offline Thanks Meter: 23	can you explain step by step ebout gp partition?? Sent from my Nokia 2 using Tapatalk

11-06-2018, 07:24	#12 (permalink)
ali_imran No Life Poster Join Date: Apr 2007 Location: India Posts: 1,998 Member: 481609 Status: Offline Sonork: 100.1659889 Thanks Meter: 367	EMMC ROM 1 7448 MB (0001D1800000) EMMC ROM 2/3 4096 KB (000000400000) EMMC RPMB 4096 KB (000000400000) EMMC GP1 for kmvtu000lm-b503 40mb use kmvtu000lm-b503 1st format 2nd gpt 3rd write dump after write dump u can flash via many tool