|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Mark Forums Read |
| Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus. |
 |
| | LinkBack | Thread Tools | Display Modes |
10-24-2019, 14:33
| #1 (permalink) |
| No Life Poster   Join Date: Jun 2008 Location: Punjabi University India
Posts: 1,473
Member: 788946 Status: Offline Sonork: 100.1682685 Thanks Meter: 502 | Can't init device, Reason: CARD Ready Timeout Error Found 3 serial devices COM1 ACPI\PNP0501 Communications Port (COM1) COM6 USB\VID_0325&PID_0032&REV_0100&MI_00 Easy Jtag Control Port (COM6) COM83 USB\VID_05C6&PID_9008&REV_0000 Qualcomm HS-USB QDLoader 9008 (COM83) Selected pinout: EasyJTAG GEN1 ISP Pinout Change EasyJTAG Pinout OK Z3X EasyJtag Software ver. 3.6.1.14 Loading eMMC GEN1 Firmware... IO: 3300 mV Box S/N: 0C0C0321A6B48779, ,FW Ver.: 01.63 CMD Pullup Level:2021 mV CMD Active Level:2454 mV Box IO Level:3300 mV CLK Rate:7000 kHz Bus Width:1bit,SDR HiPower mode is off! Can't init device, Reason: CARD Ready Timeout Error Done. |
 |
|
11-04-2019, 14:56
| #4 (permalink) |
| No Life Poster Join Date: Jun 2008 Location: Punjabi University India
Posts: 1,473
Member: 788946 Status: Offline Sonork: 100.1682685 Thanks Meter: 502 | oppo a3s 1803 show error Z3X EasyJtag Software ver. 3.6.1.14 Loading eMMC GEN1 Firmware... IO: 1800 mV Box S/N: 0C0C0321A6B48779, ,FW Ver.: 01.63 CMD Pullup Level:1680 mV CMD Active Level:1711 mV Box IO Level:1800 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is off! Can't init device, Reason: CMD Timeout Error with 1.8 vol this error Done. Z3X EasyJtag Software ver. 3.6.1.14 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 0C0C0321A6B48779, ,FW Ver.: 01.63 CMD Pullup Level:2021 mV CMD Active Level:2330 mV Box IO Level:2800 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is off! Can't init device, Reason: CARD Ready Timeout Error with 2.8 vol Done. |
| |
|
11-05-2019, 05:54
| #5 (permalink) | |
| No Life Poster Join Date: Oct 2006 Location: pakistan
Posts: 669
Member: 361094 Status: Offline Sonork: 100.1597521 Thanks Meter: 172 |  Quote:
| |
| |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
|
|
Linear Mode
