Can't init device. Reason: CMD Timeout Error - GSM-Forum

octopus82 · 11-21-2017, 16:49

I have this problem when I choose file to flash in jtag plus and also in direct emmc, can you help me to solve it please ?

HiPower mode is OFF
Frequence: 14 Mhz
CMD Pullup Level: 2681 mV
CMD Active Level: 2763 mV
Can't init device. Reason: CMD Timeout Error

pirunthan7 · 11-24-2017, 05:27

1 check the connection and use thick wire for ground connection.
https://postimg.org/image/ghstm7tud/

2 use pull up resistor 200 ohm.
https://s18.postimg.org/feplqfpi1/12...e7f7d374fa.png

3 use USB as a power source (no need to solder 1.8v and 2.8v)

alex88morris · 06-04-2018, 16:21

Quote:

Originally Posted by pirunthan7

2 use pull up resistor 200 ohm.
https://s18.postimg.org/feplqfpi1/12...e7f7d374fa.png

hi im having the same problem.
can u explain this to me please. the link doesn't work

i have 2 g532m
thanks in advance

11-21-2017, 16:49	#1 (permalink)
octopus82 Freak Poster Join Date: Jul 2012 Posts: 333 Member: 1787478 Status: Offline Thanks Meter: 22	Can't init device. Reason: CMD Timeout Error I have this problem when I choose file to flash in jtag plus and also in direct emmc, can you help me to solve it please ? HiPower mode is OFF Frequence: 14 Mhz CMD Pullup Level: 2681 mV CMD Active Level: 2763 mV Can't init device. Reason: CMD Timeout Error

11-24-2017, 05:27	#2 (permalink)
pirunthan7 Freak Poster Join Date: Sep 2015 Posts: 160 Member: 2463805 Status: Offline Thanks Meter: 32	Can't init device fix 1 check the connection and use thick wire for ground connection. https://postimg.org/image/ghstm7tud/ 2 use pull up resistor 200 ohm. https://s18.postimg.org/feplqfpi1/12...e7f7d374fa.png 3 use USB as a power source (no need to solder 1.8v and 2.8v)