GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   Easy-Jtag (http://forum.gsmhosting.com/vbb/f672/)
-   -   cmd error (http://forum.gsmhosting.com/vbb/f672/cmd-error-2486476/)

mobileguard 10-09-2018 12:28

cmd error
 
EasyJTAG box all samsung emmc error cmd i use isp adapter but same plz help

layder 10-09-2018 21:52

CMD error - check CMD wire connection.

mobileguard 10-11-2018 14:24

Compression is ON
Z3X EasyJtag Software ver. 3.2.0.3
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 04FFA01CF1EBA3D1, ,FW Ver.: 01.63
CMD Pullup Level:2299 mV
CMD Active Level:2866 mV
Box IO Level:3300 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.

layder 10-11-2018 17:35

Quote:

Originally Posted by mobileguard (Post 13360940)
Compression is ON
Z3X EasyJtag Software ver. 3.2.0.3
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 04FFA01CF1EBA3D1, ,FW Ver.: 01.63
CMD Pullup Level:2299 mV
CMD Active Level:2866 mV
Box IO Level:3300 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.


Box IO level must be match with eMMC VCCQ voltage.
What is you eMMC VCCQ voltage?


All times are GMT +1. The time now is 07:06.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.18781 seconds with 5 queries

SEO by vBSEO