|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Search | Today's Posts | Mark Forums Read |
Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus. |
| LinkBack | Thread Tools | Display Modes |
05-06-2020, 21:19 | #1 (permalink) |
Junior Member Join Date: Oct 2016
Posts: 2
Member: 2641675 Status: Offline Thanks Meter: 1 | cmd timeout error Setting bus width to 4 Bit Setting frequence to 9 MHz CMD Pullup Level: 1811 mV CMD Active Level: 1866 mV Can't init device. Reason: CMD Timeout Error help when selecting check emmc, it indicates that error |
06-03-2020, 17:27 | #4 (permalink) |
Junior Member Join Date: Apr 2020 Location: algeria
Posts: 22
Member: 2953860 Status: Offline Thanks Meter: 3 | Z3X EasyJtag Software ver. 3.6.2.3 Loading eMMC GEN2 Firmware... IO: 1800 mV Box S/N: 0E338CC0F9C5D139, ,FW Ver.: 02.50 CMD Pullup Level:1812 mV CMD Active Level:1857 mV Box IO Level:1800 mV CLK Rate:36000 kHz Bus Width:1bit,SDR HiPower mode is off! Can't init device, Reason: CMD Timeout Error Done. |
06-03-2020, 18:51 | #5 (permalink) |
Product Supporter Join Date: Jun 2002 Location: Belarus Age: 47
Posts: 3,187
Member: 13148 Status: Offline Thanks Meter: 2,948 | CMD timeout error - 1) Bad connection CMD/CLK lines, bad voltage, you need check connection and voltage 2) eMMC card fully dead, need replace At ISP mode: 1) Try to reduce CLK Rate, select correct IO voltage as PBC, adapter 2) Try to add 200 Ohm resistors to adapter for old box as at Z3x pinout pictures note |
06-04-2020, 17:54 | #6 (permalink) | |
Junior Member Join Date: Apr 2020 Location: algeria
Posts: 22
Member: 2953860 Status: Offline Thanks Meter: 3 | Quote:
thank you sir i do all what you said but already haave the same error emmc works fine i want to recover imprtant files from emmc because the phone is locked by user code | |
Bookmarks |
Thread Tools | |
Display Modes | |
| |
|