|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus. |
| LinkBack | Thread Tools | Display Modes |
12-04-2018, 15:35 | #1 (permalink) |
Registered User Join Date: Nov 2013 Location: Somewhere
Posts: 129
Member: 2072293 Status: Offline Thanks Meter: 9 | Coolpad 8297l-100 getting error------------- Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting frequence to 24 Mhz CMD Pullup Level: 1771 mV CMD Active Level: 1881 mV EMMC Device Information : EMMC CID: 90014A48384731650507D309651D5257 EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3 EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G1e , EMMC NAME (HEX): 483847316500 , S/N: D309651D , rev. 0x07 EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 5/2015 EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot Boot Bus Config: 0x00 , width 1bit H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled Supported partition features [PARTITIONING_SUPPORT]: 0x07 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Device can have extended partitions attribute Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01 Backup saved: H8G1e_D309651D_20181204_193845.extcsd EMMC Init completed. Opening file: rawprogram0.xml The size of the last section has been updated Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting frequence to 24 Mhz CMD Pullup Level: 1765 mV CMD Active Level: 1878 mV EMMC Device Information : EMMC CID: 90014A48384731650507D309651D5257 EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3 EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G1e , EMMC NAME (HEX): 483847316500 , S/N: D309651D , rev. 0x07 EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 5/2015 EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot Boot Bus Config: 0x00 , width 1bit H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled Supported partition features [PARTITIONING_SUPPORT]: 0x07 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Device can have extended partitions attribute Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01 Backup saved: H8G1e_D309651D_20181204_193852.extcsd EMMC Init completed. Operation: Write by vendor (Qualcomm/HiSilicon) Creating GPT-partitioninig GPT-partitioning done Partition name: modem Filename: NON-HLOS.bin , Offset: 000002000000 , filesize: 47793664 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2617.20 KB/s Partition name: sbl1 Filename: sbl1.mbn , Offset: 000006000000 , filesize: 250664 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2116.46 KB/s Partition name: sbl1bak Filename: sbl1.mbn , Offset: 000006080000 , filesize: 250664 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2134.89 KB/s Partition name: aboot Filename: emmc_appsboot.mbn , Offset: 000006100000 , filesize: 2255244 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2544.29 KB/s Partition name: abootbak Filename: emmc_appsboot.mbn , Offset: 000007000000 , filesize: 2255244 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2573.60 KB/s Partition name: rpm Filename: rpm.mbn , Offset: 000007F00000 , filesize: 150848 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1517.90 KB/s Partition name: rpmbak Filename: rpm.mbn , Offset: 000007F80000 , filesize: 150848 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1516.53 KB/s Partition name: tz Filename: tz.mbn , Offset: 000008000000 , filesize: 387016 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2336.29 KB/s Partition name: tzbak Filename: tz.mbn , Offset: 000008080000 , filesize: 387016 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2219.83 KB/s Partition name: hyp Filename: hyp.mbn , Offset: 000008100000 , filesize: 20520 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 566.73 KB/s Partition name: hypbak Filename: hyp.mbn , Offset: 000008180000 , filesize: 20520 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 564.77 KB/s Partition name: modemst1 Filename: dummy.bin , Offset: 000008300000 , filesize: 1572864 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2635.90 KB/s Partition name: modemst2 Filename: dummy.bin , Offset: 000008480000 , filesize: 1572864 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2618.90 KB/s Partition name: misc Filename: MISC.img , Offset: 000008600000 , filesize: 1048576 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2565.13 KB/s Partition name: fsg Filename: nv.tar.mbn , Offset: 00000A008000 , filesize: 77608 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1022.41 KB/s Partition name: sec Filename: sec.dat , Offset: 00000A188000 , filesize: 428 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 30.22 KB/s Partition name: boot Filename: boot.img , Offset: 00000A18C000 , filesize: 8366080 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2604.35 KB/s Partition name: params Filename: param.bin , Offset: 00000C000000 , filesize: 10752 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 325.71 KB/s Partition name: panic Filename: panic.img , Offset: 00000C100000 , filesize: 4579328 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2676.99 KB/s Partition name: system Filename: system.img , Offset: 00000E000000 , filesize: 1513087820 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Sparse image found v.1.0 Total chunks: 3140 Done writing partition. Write speed: 1718.43 KB/s Partition name: persist Filename: persist.img , Offset: 00008E000000 , filesize: 4427960 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Sparse image found v.1.0 Total chunks: 13 Done writing partition. Write speed: 2415.63 KB/s Partition name: cache Filename: cache.img , Offset: 00008EA00000 , filesize: 6348948 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Sparse image found v.1.0 Total chunks: 10 Done writing partition. Write speed: 2503.26 KB/s Partition name: recovery Filename: recovery.img , Offset: 000096A00000 , filesize: 8953856 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2626.26 KB/s Partition name: userdata Filename: userdata.img , Offset: 000097E00000 , filesize: 259079868 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Sparse image found v.1.0 Total chunks: 312 Done writing partition. Write speed: 2576.97 KB/s Check BOOT_PARTITION_EN for the selected vendor All done time: [00:19:49:734] |
12-07-2018, 13:59 | #6 (permalink) | |
Product Supporter Join Date: Mar 2013 Location: JTAG/eMMC/UFS
Posts: 892
Member: 1902789 Status: Offline Thanks Meter: 1,100 | Quote:
I found a problem in log... Problem is "Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot" Actual Coolpad 8297I-100 Model Boot from ROM1 (Main User Area) So, Please Check BOOT_PARTITION_EN & Do Correct Boot Configuration. Do This Steps: 1. Universal Factory Format, 2. Change Boot Config. no boot to ROM1 (Main Use Area), 3. Write Full Flash with tested .xml firmware from write By vendor Tab... After that Re check ur Mobile... Last edited by Pijush Das; 12-07-2018 at 14:05. | |
The Following 2 Users Say Thank You to Pijush Das For This Useful Post: |
12-09-2018, 15:22 | #7 (permalink) |
Registered User Join Date: Nov 2013 Location: Somewhere
Posts: 129
Member: 2072293 Status: Offline Thanks Meter: 9 | Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting frequence to 24 Mhz CMD Pullup Level: 1813 mV CMD Active Level: 1879 mV EMMC Device Information : EMMC CID: 90014A48384731650507D309651D5257 EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3 EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G1e , EMMC NAME (HEX): 483847316500 , S/N: D309651D , rev. 0x07 EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 5/2015 EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area) Boot Bus Config: 0x00 , width 1bit H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled Supported partition features [PARTITIONING_SUPPORT]: 0x07 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Device can have extended partitions attribute Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01 Backup saved: H8G1e_D309651D_20181209_183721.extcsd EMMC Init completed. Opening file: rawprogram0.xml The size of the last section has been updated Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting frequence to 24 Mhz CMD Pullup Level: 1823 mV CMD Active Level: 1881 mV EMMC Device Information : EMMC CID: 90014A48384731650507D309651D5257 EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3 EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G1e , EMMC NAME (HEX): 483847316500 , S/N: D309651D , rev. 0x07 EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 5/2015 EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area) Boot Bus Config: 0x00 , width 1bit H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled Supported partition features [PARTITIONING_SUPPORT]: 0x07 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Device can have extended partitions attribute Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01 Backup saved: H8G1e_D309651D_20181209_183727.extcsd EMMC Init completed. Operation: Write by vendor (Qualcomm/HiSilicon) Creating GPT-partitioninig GPT-partitioning done Partition name: modem Filename: NON-HLOS.bin , Offset: 000002000000 , filesize: 47793664 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2627.75 KB/s Partition name: sbl1 Filename: sbl1.mbn , Offset: 000006000000 , filesize: 250664 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1807.18 KB/s Partition name: sbl1bak Filename: sbl1.mbn , Offset: 000006080000 , filesize: 250664 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2135.69 KB/s Partition name: aboot Filename: emmc_appsboot.mbn , Offset: 000006100000 , filesize: 2255244 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2439.98 KB/s Partition name: abootbak Filename: emmc_appsboot.mbn , Offset: 000007000000 , filesize: 2255244 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2573.42 KB/s Partition name: rpm Filename: rpm.mbn , Offset: 000007F00000 , filesize: 150848 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1527.40 KB/s Partition name: rpmbak Filename: rpm.mbn , Offset: 000007F80000 , filesize: 150848 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1540.21 KB/s Partition name: tz Filename: tz.mbn , Offset: 000008000000 , filesize: 387016 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2225.02 KB/s Partition name: tzbak Filename: tz.mbn , Offset: 000008080000 , filesize: 387016 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2229.14 KB/s Partition name: hyp Filename: hyp.mbn , Offset: 000008100000 , filesize: 20520 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 569.93 KB/s Partition name: hypbak Filename: hyp.mbn , Offset: 000008180000 , filesize: 20520 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 597.05 KB/s Partition name: modemst1 Filename: dummy.bin , Offset: 000008300000 , filesize: 1572864 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2432.48 KB/s Partition name: modemst2 Filename: dummy.bin , Offset: 000008480000 , filesize: 1572864 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2651.67 KB/s Partition name: misc Filename: MISC.img , Offset: 000008600000 , filesize: 1048576 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2266.95 KB/s Partition name: fsg Filename: nv.tar.mbn , Offset: 00000A008000 , filesize: 77608 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 1016.68 KB/s Partition name: sec Filename: sec.dat , Offset: 00000A188000 , filesize: 428 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 29.65 KB/s Partition name: boot Filename: boot.img , Offset: 00000A18C000 , filesize: 8366080 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2606.74 KB/s Partition name: params Filename: param.bin , Offset: 00000C000000 , filesize: 10752 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 333.33 KB/s Partition name: panic Filename: panic.img , Offset: 00000C100000 , filesize: 4579328 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2603.38 KB/s Partition name: system Filename: system.img , Offset: 00000E000000 , filesize: 1513087820 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Sparse image found v.1.0 Total chunks: 3140 Done writing partition. Write speed: 2501.01 KB/s Partition name: persist Filename: persist.img , Offset: 00008E000000 , filesize: 4427960 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Sparse image found v.1.0 Total chunks: 13 Done writing partition. Write speed: 2420.01 KB/s Partition name: cache Filename: cache.img , Offset: 00008EA00000 , filesize: 6348948 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Sparse image found v.1.0 Total chunks: 10 Done writing partition. Write speed: 2497.60 KB/s Partition name: recovery Filename: recovery.img , Offset: 000096A00000 , filesize: 8953856 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Done writing partition. Write speed: 2623.15 KB/s Partition name: userdata Filename: userdata.img , Offset: 000097E00000 , filesize: 259079868 bytes eMMC switching to ROM1 Erasing partition... Writing partition... Sparse image found v.1.0 Total chunks: 312 Done writing partition. Write speed: 2594.13 KB/s All done time: [00:14:37:166] mobile still in dead condition, even not entering in download mode by sd card method now. |
12-10-2018, 06:27 | #8 (permalink) | |
Product Supporter Join Date: Mar 2013 Location: JTAG/eMMC/UFS
Posts: 892
Member: 1902789 Status: Offline Thanks Meter: 1,100 | Quote:
Bcoz Hardware Partition already Done By You, So now no others option you have for recovery this eMMC.... Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01 | |
The Following User Says Thank You to Pijush Das For This Useful Post: |
12-10-2018, 07:35 | #9 (permalink) |
Registered User Join Date: Nov 2013 Location: Somewhere
Posts: 129
Member: 2072293 Status: Offline Thanks Meter: 9 | Sir i have an questions first time log with error that time mobile comes in download by sd card method. Second time log comes without any error but this time mobile not comes in download by sd card. |
Bookmarks |
| |
|