E-mate Pro EMMC Tool All in 1 socket and All in 1 adapter work with EASYJTAG - Page 3 - GSM-Forum

Bloedi · 07-19-2017, 10:48

It is nice that this adapter has been developed and that you can buy it for a lot of money, but from where - damn again - I get the complete firmware for example for the eMMC memory of a Samsung Galaxy S3 (i9300 - KMVTU000LM-B503, BGA 153 / 169), a Samsung Galaxy Note 4 (N910x-kmr210008m-a805, BGA 529)?

I have not found a forum post, where the firmwares are offered for download.

So where can I get this? Do I need to read the firmware itself from a working eMMC memory?

I miss understandable tutorials, where is exactly explained and shown, how to read out all relevant areas of the eMMC memory and how to transfer these read data error-free into another eMMC chip.

I bought a Riff Box 1, but I can not find any reasonable information. When other users ask such questions, they rarely get helpful answers or do mostly not receive answers to their important questions.

So where can I download the firmware for all or at least the most important eMMC memory - in my case for the Riff Box 1?

I need the firmware for the Samsung Galaxy S3 and for the Smasung Galaxy Note 4 eMMC memory, which is not offered for download by the JTAG Manager of the Riff Box.

Exists such a download portal? If not, why does no one create such a download source?

backbiter17 · 10-30-2017, 10:49

need help connecting this adapter

where to connect on e-mate pro?

do i olso need power with micri USB cable?

wbr,A

kaushikbhadra · 11-02-2017, 05:34

it is best option for ufi box direct user partition write, brother one side connect emmc box and second side use all in one card reader........

newbeez1 · 11-24-2017, 18:23

i have the e-mate all 6 in one the last time i connected a BGA-221 there is two diodes near the 3.3 1.8 v switch one of them went hot and now i won't able to read any emmc
every time i put different emmc in the socket it won't read cmd error
and when putting BGA-221 the diode starts heat again i even flip the switch to 1.8 the other diide started to heat any help

MOORC · 11-27-2017, 05:04

Quote:

Originally Posted by newbeez1

i have the e-mate all 6 in one the last time i connected a BGA-221 there is two diodes near the 3.3 1.8 v switch one of them went hot and now i won't able to read any emmc
every time i put different emmc in the socket it won't read cmd error
and when putting BGA-221 the diode starts heat again i even flip the switch to 1.8 the other diide started to heat any help

All are 3.3v. Easyjtag need add usb 5V. Set 3.3V

MOORC · 11-27-2017, 05:07

Quote:

Originally Posted by Bloedi

It is nice that this adapter has been developed and that you can buy it for a lot of money, but from where - damn again - I get the complete firmware for example for the eMMC memory of a Samsung Galaxy S3 (i9300 - KMVTU000LM-B503, BGA 153 / 169), a Samsung Galaxy Note 4 (N910x-kmr210008m-a805, BGA 529)?

I have not found a forum post, where the firmwares are offered for download.

So where can I get this? Do I need to read the firmware itself from a working eMMC memory?

I miss understandable tutorials, where is exactly explained and shown, how to read out all relevant areas of the eMMC memory and how to transfer these read data error-free into another eMMC chip.

I bought a Riff Box 1, but I can not find any reasonable information. When other users ask such questions, they rarely get helpful answers or do mostly not receive answers to their important questions.

So where can I download the firmware for all or at least the most important eMMC memory - in my case for the Riff Box 1?

I need the firmware for the Samsung Galaxy S3 and for the Smasung Galaxy Note 4 eMMC memory, which is not offered for download by the JTAG Manager of the Riff Box.

Exists such a download portal? If not, why does no one create such a download source?

this is a emmc Socket. Not emmc frimware. Socket is socket.

najrazlug · 01-05-2018, 07:00

How to Deal with samsung totaly dead emmc to write firmware via TP In fallowing socket ?

najrazlug · 01-05-2018, 09:51

Quote:

Originally Posted by najrazlug

How to Deal with samsung totaly dead emmc to write firmware via TP In fallowing socket ?

Also HV 3 Switches on adoper exlpain All in ur words

zack winstone · 03-18-2018, 16:01

this moorc emate is suported to new easy jtag plus?

backbiter17 · 03-19-2018, 07:05

Quote:

Originally Posted by zack winstone

this moorc emate is suported to new easy jtag plus?

YES working fine

wbr,A

adilflach · 08-31-2018, 19:26

this moorc emate is suported to easy jtag

07-19-2017, 10:48	#31 (permalink)
Bloedi Junior Member Join Date: Jul 2017 Posts: 2 Member: 2738261 Status: Offline Thanks Meter: 0	Nice hardware, but worthless without the appropriate eMMC firmware It is nice that this adapter has been developed and that you can buy it for a lot of money, but from where - damn again - I get the complete firmware for example for the eMMC memory of a Samsung Galaxy S3 (i9300 - KMVTU000LM-B503, BGA 153 / 169), a Samsung Galaxy Note 4 (N910x-kmr210008m-a805, BGA 529)? I have not found a forum post, where the firmwares are offered for download. So where can I get this? Do I need to read the firmware itself from a working eMMC memory? I miss understandable tutorials, where is exactly explained and shown, how to read out all relevant areas of the eMMC memory and how to transfer these read data error-free into another eMMC chip. I bought a Riff Box 1, but I can not find any reasonable information. When other users ask such questions, they rarely get helpful answers or do mostly not receive answers to their important questions. So where can I download the firmware for all or at least the most important eMMC memory - in my case for the Riff Box 1? I need the firmware for the Samsung Galaxy S3 and for the Smasung Galaxy Note 4 eMMC memory, which is not offered for download by the JTAG Manager of the Riff Box. Exists such a download portal? If not, why does no one create such a download source? Last edited by Bloedi; 07-19-2017 at 10:56.

01-05-2018, 07:00	#37 (permalink)
najrazlug Freak Poster Join Date: Sep 2014 Location: Bahawal Nagar Posts: 167 Member: 2250995 Status: Offline Thanks Meter: 47	Deal With EMMC TP in Emate Pro emmc tool ??? How to Deal with samsung totaly dead emmc to write firmware via TP In fallowing socket ?

11-02-2017, 05:34	#33 (permalink)
kaushikbhadra Freak Poster Join Date: Jan 2011 Location: india Posts: 276 Member: 1503859 Status: Offline Sonork: 100.1672251 Thanks Meter: 43	it is best option for ufi box direct user partition write, brother one side connect emmc box and second side use all in one card reader........

11-24-2017, 18:23	#34 (permalink)
newbeez1 Freak Poster Join Date: Jul 2014 Posts: 292 Member: 2228162 Status: Offline Sonork: 23243564rtrwe Thanks Meter: 31	i have the e-mate all 6 in one the last time i connected a BGA-221 there is two diodes near the 3.3 1.8 v switch one of them went hot and now i won't able to read any emmc every time i put different emmc in the socket it won't read cmd error and when putting BGA-221 the diode starts heat again i even flip the switch to 1.8 the other diide started to heat any help

03-18-2018, 16:01	#39 (permalink)
zack winstone Freak Poster Join Date: Nov 2014 Posts: 451 Member: 2287102 Status: Offline Thanks Meter: 119	this moorc emate is suported to new easy jtag plus?

08-31-2018, 19:26	#41 (permalink)
adilflach Insane Poster Join Date: Jan 2006 Location: morocco Age: 41 Posts: 99 Member: 217640 Status: Offline Thanks Meter: 1	this moorc emate is suported to easy jtag