Easy-JTAG 1.1.x.x - HIGH speed EMMC Direct core 2.0 Beta testing before release. - Page 2 - GSM-Forum

titanic · 04-21-2014, 17:32

Writing file...D:\Phones\Easy Jtag\I9300\EMMC_ROM2_00000000_00200000.bin
Z3X EasyJtag Software ver. 1.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1608 mV
CMD Active Level:2217 mV
Writing 000000200000 bytes to 00000000 ...ROM2
Write Length has been corrected to 0x000000080000 bytes...
Write Speed: 820 kB/s
Done !!!

Cheers
BR,

titanic · 04-21-2014, 17:36

usb port open fail.

read emmc error: "cant init emmc"

BR,

**blang** · 04-21-2014, 18:00

Quote:

Originally Posted by titanic

usb port open fail.

read emmc error: "cant init emmc"

BR,

when this happends? please explaine

titanic · 04-21-2014, 18:44

sorry could not log them but will respond to it soon.

and help with logs too.

but the speed is the best.
i9300 whole process finished in 14min.
BR,

tungkick · 04-22-2014, 03:24

tHANK TEAM VERY FAST

love edition · 04-22-2014, 09:29

Thanks Team Easy-Jtag!

Quote:

EasyJtag Suite ver.: 1.1.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition.
Successefuly connected to box on COM63
Box S/N: 0100900689******, ,FW Ver.: 01.49
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AA1*-**** , ver: 22
Z3X EasyJtag Software ver. 1.1.0.0
Loading eMMC Addon Firmware...
Box S/N: 0100900689******, ,FW Ver.: 01.49
CMD Pullup Level:1361 mV
CMD Active Level:1258 mV
eMMC Device Information
EMMC CID : 1501004B594C30304D122EAF7E9DCE84
EMMC CSD : D02701320F5903FFF6DBFFEF8A404066
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2011 Rev.0x12
EMMC NAME: KYL00M , S/N: 783253149
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: KYL00M_ 783253149_20140302_1444.extcsd
Done.
Running:SAMSUNG: Smart Factory Reset + Format...
Z3X EasyJtag Software ver. 1.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1361 mV
CMD Active Level:1258 mV
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
extCSD file...E:\EASYJTAG\Backups\KYL00M_ 783253149_20140302_1238.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 1.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1361 mV
CMD Active Level:1258 mV
Writing...
Done!
Done.
Please don't forget to repair extCSD from backup!!!
Writing file...E:\Full Dump Riff\A820L\A820L-512MB.BIN
Z3X EasyJtag Software ver. 1.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1361 mV
CMD Active Level:1258 mV
Writing 000020000000 bytes to 00000000 ...ROM1
Write Speed: 528 kB/s
Done !!!

F-Buzz · 04-22-2014, 15:33

speed jet

write done

alkim · 04-22-2014, 15:39

support nexus s i9020t thanks

drjaved_akhter · 04-22-2014, 18:52

thanks z3x team for ideal speed.it is work perfect and very good speed.

EasyJtag Suite ver.: 1.1.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
Successefuly connected to box on COM3
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.49
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AA3B-2511 , ver: 22
Z3X EasyJtag Software ver. 1.1.0.0
Loading eMMC Addon Firmware...
Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.49
CMD Active Level:1680 mV
eMMC Device Information
EMMC CID : 15010056545530304D08637E86212178
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 02/1998 Rev.0x8
EMMC NAME: VTU00M , S/N: 1669236257
EMMC ROM1 (Main User Data) Capacity: 14910 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_1669236257_20140302_1031.extcsd
Done.
Writing file...E:\ALL DEVISES\z3x\9. Easy Jtag files\Samsung\GT-I9300\Dump\EMMC_ROM2_00000000_00200000.bin
Z3X EasyJtag Software ver. 1.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1680 mV
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 511 kB/s
Done !!!
Writing file...E:\ALL DEVISES\z3x\9. Easy Jtag files\Samsung\GT-I9300\Dump\EMMC_ROM1_00000000_20000000.bin
Z3X EasyJtag Software ver. 1.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1680 mV
Writing 000020000000 bytes to 00000000 ...ROM1
Write Speed: 508 kB/s
Done !!!

NoName® · 04-23-2014, 15:31

1ST Post has been updated and new build attached.

drjaved_akhter · 04-23-2014, 15:38

sir,
beta exe not repair no product problem.old exe repair please check.beta exe not power on phon

a65333002 · 04-23-2014, 16:39

Z3X EasyJtag Software ver. 1.1.0.1
Loading eMMC Addon Firmware...
Box S/N: 0707051BED842DAD, ,FW Ver.: 01.49
CMD Pullup Level:2691 mV
CMD Active Level:2774 mV
eMMC Device Information
EMMC CID : 15010056594C30304D19228C48D99E40
EMMC CSD : D02701320F5903FFF6DBFFEF8A404066
EMMC Manufacturer ID: 0000 , OEM ID: 0000
EMMC Date: 00/0000 Rev.0x0
EMMC NAME: , S/N: 0
Can't init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line !!!
===================================
i9100,before repair connect,i format samsung,format movinand,repair extcsd,and with error writing rom 1.
now cant connect

shadigsm · 04-23-2014, 19:03

EasyJtag Suite ver.: 1.1.0.1 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
Successefuly connected to box on COM10
Box S/N: 18FF501759B481A6, ,FW Ver.: 01.49
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AACA-40CD , ver: 22
Z3X EasyJtag Software ver. 1.1.0.1
Loading eMMC Addon Firmware...
Box S/N: 18FF501759B481A6, ,FW Ver.: 01.49
CMD Pullup Level:1216 mV
CMD Active Level:1660 mV
eMMC Device Information
EMMC CID : 15010056545530304DF7D55234A6CF5A
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 Rev.0xf7
EMMC NAME: VTU00M , S/N: 3578934438
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3578934438_20140305_2211.extcsd
Done.
Writing file...C:\Users\Shadi\Documents\i9300\EMMC_ROM1_51 2Mb_USER\EMMC_ROM1_00000000_20000000.bin
Z3X EasyJtag Software ver. 1.1.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1216 mV
CMD Active Level:1660 mV
Writing 000020000000 bytes to 00000000 ...ROM1
Write Speed: 495 kB/s
Done !!!
Writing file...C:\Users\Shadi\Documents\i9300\EMMC_ROM2_2M b_BOOT\EMMC_ROM2_00000000_00200000.bin
Z3X EasyJtag Software ver. 1.1.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1216 mV
CMD Active Level:1660 mV
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 490 kB/s
Done !!!

tHANK TEAM VERY FAST

titanic · 04-24-2014, 07:43

Z3X EasyJtag Software ver. 1.1.0.1
Loading eMMC Addon Firmware...
Box S/N: 0606F80FA22B6D2F, ,FW Ver.: 01.49
CMD Pullup Level:1474 mV
CMD Active Level:2258 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1084B4D707F88
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 07/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 139152752
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_ 139152752_20140304_0942.extcsd
Searching for partition tables...
Read Pages Failed, Reason: CARD Data FIFO Timeout Error
Done.

Br,

johnkago · 04-24-2014, 16:00

Hallo ihave z3x jtag iwant to repair deadboot sgh i337 and the pinout u show dont mach with my cable eg idont hav NRST RTCK and TDO or which colours are they?

04-21-2014, 17:32	#16 (permalink)
titanic Freak Poster Join Date: Apr 2004 Location: Mumbai, kuwait, UAE Posts: 164 Member: 63065 Status: Offline Sonork: 100.102547 Thanks Meter: 24	Speed matters!!!!! Writing file...D:\Phones\Easy Jtag\I9300\EMMC_ROM2_00000000_00200000.bin Z3X EasyJtag Software ver. 1.1.0.0 Skip loading eMMC Addon Firmware CMD Pullup Level:1608 mV CMD Active Level:2217 mV Writing 000000200000 bytes to 00000000 ...ROM2 Write Length has been corrected to 0x000000080000 bytes... Write Speed: 820 kB/s Done !!! Cheers BR,

04-21-2014, 17:36	#17 (permalink)
titanic Freak Poster Join Date: Apr 2004 Location: Mumbai, kuwait, UAE Posts: 164 Member: 63065 Status: Offline Sonork: 100.102547 Thanks Meter: 24	bugs to be fixed usb port open fail. read emmc error: "cant init emmc" BR,

04-21-2014, 18:44	#19 (permalink)
titanic Freak Poster Join Date: Apr 2004 Location: Mumbai, kuwait, UAE Posts: 164 Member: 63065 Status: Offline Sonork: 100.102547 Thanks Meter: 24	error log sorry could not log them but will respond to it soon. and help with logs too. but the speed is the best. i9300 whole process finished in 14min. BR,

04-24-2014, 07:43	#29 (permalink)
titanic Freak Poster Join Date: Apr 2004 Location: Mumbai, kuwait, UAE Posts: 164 Member: 63065 Status: Offline Sonork: 100.102547 Thanks Meter: 24	can any one highlight thie error Z3X EasyJtag Software ver. 1.1.0.1 Loading eMMC Addon Firmware... Box S/N: 0606F80FA22B6D2F, ,FW Ver.: 01.49 CMD Pullup Level:1474 mV CMD Active Level:2258 mV eMMC Device Information EMMC CID : 15010056545530304DF1084B4D707F88 EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 07/2012 Rev.0xf1 EMMC NAME: VTU00M , S/N: 139152752 EMMC ROM1 (Main User Data) Capacity: 15028 MB EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB Extended CSD rev 1.6 (MMC 4.5) Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48. Backup saved: VTU00M_ 139152752_20140304_0942.extcsd Searching for partition tables... Read Pages Failed, Reason: CARD Data FIFO Timeout Error Done. Br, Last edited by titanic; 04-24-2014 at 07:43. Reason: spelling mistake

04-22-2014, 03:24	#20 (permalink)
tungkick Freak Poster Join Date: Nov 2012 Age: 38 Posts: 132 Member: 1836541 Status: Offline Thanks Meter: 92	tHANK TEAM VERY FAST

04-22-2014, 15:33	#22 (permalink)
F-Buzz Freak Poster Join Date: Mar 2008 Location: Tangerang indonesia Age: 42 Posts: 218 Member: 730337 Status: Offline Thanks Meter: 65	speed jet write done

04-22-2014, 15:39	#23 (permalink)
alkim No Life Poster Join Date: Mar 2009 Location: earth Posts: 1,430 Member: 992568 Status: Offline Sonork: kulit Thanks Meter: 231	support nexus s i9020t thanks

04-22-2014, 18:52	#24 (permalink)
drjaved_akhter No Life Poster Join Date: Sep 2007 Location: PAKISTAN Posts: 1,130 Member: 585807 Status: Offline Thanks Meter: 781	thanks z3x team for ideal speed.it is work perfect and very good speed. EasyJtag Suite ver.: 1.1.0.0 / wxWidgets 3.1.0-W-U started. Operating system ver.: Windows 7 (build 7601, Service Pack 1). Successefuly connected to box on COM3 Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.49 Box Working Mode: JTAG Box. Box Drivers version: 3.0.0.0, are OK Z3X Card Serial : AA3B-2511 , ver: 22 Z3X EasyJtag Software ver. 1.1.0.0 Loading eMMC Addon Firmware... Box S/N: 1717160DCD0D8A9F, ,FW Ver.: 01.49 CMD Active Level:1680 mV eMMC Device Information EMMC CID : 15010056545530304D08637E86212178 EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 02/1998 Rev.0x8 EMMC NAME: VTU00M , S/N: 1669236257 EMMC ROM1 (Main User Data) Capacity: 14910 MB EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB Extended CSD rev 1.6 (MMC 4.5) Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48. Backup saved: VTU00M_1669236257_20140302_1031.extcsd Done. Writing file...E:\ALL DEVISES\z3x\9. Easy Jtag files\Samsung\GT-I9300\Dump\EMMC_ROM2_00000000_00200000.bin Z3X EasyJtag Software ver. 1.1.0.0 Skip loading eMMC Addon Firmware CMD Pullup Level:1185 mV CMD Active Level:1680 mV Writing 000000200000 bytes to 00000000 ...ROM2 Write Speed: 511 kB/s Done !!! Writing file...E:\ALL DEVISES\z3x\9. Easy Jtag files\Samsung\GT-I9300\Dump\EMMC_ROM1_00000000_20000000.bin Z3X EasyJtag Software ver. 1.1.0.0 Skip loading eMMC Addon Firmware CMD Pullup Level:1185 mV CMD Active Level:1680 mV Writing 000020000000 bytes to 00000000 ...ROM1 Write Speed: 508 kB/s Done !!!

04-23-2014, 15:31	#25 (permalink)
NoName® Product Supporter Join Date: Mar 2005 Location: China Posts: 3,338 Member: 129885 Status: Offline Sonork: 100:1603514 Thanks Meter: 6,202	1ST Post has been updated and new build attached.

04-23-2014, 15:38	#26 (permalink)
drjaved_akhter No Life Poster Join Date: Sep 2007 Location: PAKISTAN Posts: 1,130 Member: 585807 Status: Offline Thanks Meter: 781	sir, beta exe not repair no product problem.old exe repair please check.beta exe not power on phon

04-23-2014, 16:39	#27 (permalink)
a65333002 Freak Poster Join Date: Sep 2012 Location: madrid spain Posts: 322 Member: 1815849 Status: Offline Thanks Meter: 17	Z3X EasyJtag Software ver. 1.1.0.1 Loading eMMC Addon Firmware... Box S/N: 0707051BED842DAD, ,FW Ver.: 01.49 CMD Pullup Level:2691 mV CMD Active Level:2774 mV eMMC Device Information EMMC CID : 15010056594C30304D19228C48D99E40 EMMC CSD : D02701320F5903FFF6DBFFEF8A404066 EMMC Manufacturer ID: 0000 , OEM ID: 0000 EMMC Date: 00/0000 Rev.0x0 EMMC NAME: , S/N: 0 Can't init EMMC, Reason: CARD Data FIFO Timeout Error Check Data Line !!! =================================== i9100,before repair connect,i format samsung,format movinand,repair extcsd,and with error writing rom 1. now cant connect

04-23-2014, 19:03	#28 (permalink)
shadigsm No Life Poster Join Date: May 2006 Location: West Jerusalem Posts: 621 Member: 280342 Status: Offline Thanks Meter: 73	EasyJtag Suite ver.: 1.1.0.1 / wxWidgets 3.1.0-W-U started. Operating system ver.: Windows 7 (build 7601, Service Pack 1). Successefuly connected to box on COM10 Box S/N: 18FF501759B481A6, ,FW Ver.: 01.49 Box Working Mode: JTAG Box. Box Drivers version: 3.0.0.0, are OK Z3X Card Serial : AACA-40CD , ver: 22 Z3X EasyJtag Software ver. 1.1.0.1 Loading eMMC Addon Firmware... Box S/N: 18FF501759B481A6, ,FW Ver.: 01.49 CMD Pullup Level:1216 mV CMD Active Level:1660 mV eMMC Device Information EMMC CID : 15010056545530304DF7D55234A6CF5A EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 12/2012 Rev.0xf7 EMMC NAME: VTU00M , S/N: 3578934438 EMMC ROM1 (Main User Data) Capacity: 15028 MB EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB Extended CSD rev 1.6 (MMC 4.5) Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48. Backup saved: VTU00M_3578934438_20140305_2211.extcsd Done. Writing file...C:\Users\Shadi\Documents\i9300\EMMC_ROM1_51 2Mb_USER\EMMC_ROM1_00000000_20000000.bin Z3X EasyJtag Software ver. 1.1.0.1 Skip loading eMMC Addon Firmware CMD Pullup Level:1216 mV CMD Active Level:1660 mV Writing 000020000000 bytes to 00000000 ...ROM1 Write Speed: 495 kB/s Done !!! Writing file...C:\Users\Shadi\Documents\i9300\EMMC_ROM2_2M b_BOOT\EMMC_ROM2_00000000_00200000.bin Z3X EasyJtag Software ver. 1.1.0.1 Skip loading eMMC Addon Firmware CMD Pullup Level:1216 mV CMD Active Level:1660 mV Writing 000000200000 bytes to 00000000 ...ROM2 Write Speed: 490 kB/s Done !!! tHANK TEAM VERY FAST

04-24-2014, 16:00	#30 (permalink)
johnkago Insane Poster Join Date: Oct 2012 Location: Technology city Posts: 78 Member: 1823012 Status: Offline Thanks Meter: 10	Hallo ihave z3x jtag iwant to repair deadboot sgh i337 and the pinout u show dont mach with my cable eg idont hav NRST RTCK and TDO or which colours are they?