galaxy nexus m200k boot don but same - GSM-Forum

jailbreak-how · 10-04-2014, 12:42

galaxy nexus boot repair don but same condition it givs on DC supply on 4.8
0.30 or 0.29

logs are here

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG SHW-M200K Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 01008006F9541AEB ,FW Ver.: 01.50
Connecting to Target...
JTAG device: S5PC110
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing SBL...
NAND Write OK! Elapsed time: 17.799631s (88.991 KiB/s)
NAND Writing BOOT...
NAND Write OK! Elapsed time: 99.528175s (42.440 KiB/s)
NAND Writing RECOVERY...
NAND Write OK! Elapsed time: 108.061386s (41.532 KiB/s)
All Done.

jailbreak-how · 10-04-2014, 13:05

one more think my nexus model is m200s but no boot file at server for m200s
i tried it with m200k file.

jailbreak-how · 10-09-2014, 14:35

hello z3x support are you there?

10-04-2014, 12:42	#1 (permalink)
jailbreak-how Freak Poster Join Date: Jun 2011 Location: earth Posts: 261 Member: 1598016 Status: Offline Thanks Meter: 61	galaxy nexus m200k boot don but same galaxy nexus boot repair don but same condition it givs on DC supply on 4.8 0.30 or 0.29 logs are here For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL Check security...OK Initialising: SAMSUNG SHW-M200K Config ver.:1.00 I/O Level set to : 2800 mV Box S/N: 01008006F9541AEB ,FW Ver.: 01.50 Connecting to Target... JTAG device: S5PC110 CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1 CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8 Halting CPU... Initialize hardware... Starting target communication... Detecting nand memory parameters ... NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages NAND Writing SBL... NAND Write OK! Elapsed time: 17.799631s (88.991 KiB/s) NAND Writing BOOT... NAND Write OK! Elapsed time: 99.528175s (42.440 KiB/s) NAND Writing RECOVERY... NAND Write OK! Elapsed time: 108.061386s (41.532 KiB/s) All Done.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-04-2014, 13:05	#2 (permalink)
jailbreak-how Freak Poster Join Date: Jun 2011 Location: earth Posts: 261 Member: 1598016 Status: Offline Thanks Meter: 61	one more think my nexus model is m200s but no boot file at server for m200s i tried it with m200k file.

10-09-2014, 14:35	#3 (permalink)
jailbreak-how Freak Poster Join Date: Jun 2011 Location: earth Posts: 261 Member: 1598016 Status: Offline Thanks Meter: 61	hello z3x support are you there?