GSM Shop  
GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 06-21-2017, 07:14   #16 (permalink)
Insane Poster
 
Join Date: Apr 2012
Posts: 72
Member: 1751613
Status: Offline
Thanks Meter: 23

hello z3x tem all phone pinout .but wher dump file?
  Reply With Quote
The Following User Says Thank You to riaz88833 For This Useful Post:
Old 06-21-2017, 07:27   #17 (permalink)
No Life Poster
 
vickyjadhav6161's Avatar
 
Join Date: Apr 2015
Location: Left out from our gsm field
Age: 23
Posts: 979
Member: 2386560
Status: Offline
Sonork: NOW I DON'T USE IT
Thanks Meter: 535
Donate money to this user
add moto dead cid repair,if it possible.thx in advance.
  Reply With Quote
Old 06-21-2017, 07:39   #18 (permalink)
Freak Poster
 
Join Date: Nov 2014
Posts: 135
Member: 2287102
Status: Online
Thanks Meter: 32
untel now don't have sm-j100ml dump file on support
  Reply With Quote
Old 06-21-2017, 09:31   #19 (permalink)
No Life Poster
 
Join Date: Mar 2010
Location: Cambodia
Posts: 4,090
Member: 1260512
Status: Offline
Sonork: 100.1605447
Thanks Meter: 417
Pls add dump file Honor 4x CHe2-L11 to support.
  Reply With Quote
Old 06-21-2017, 10:24   #20 (permalink)
Freak Poster
 
Join Date: Aug 2005
Age: 46
Posts: 370
Member: 169616
Status: Offline
Thanks Meter: 17
Good update bro.
I need urgently lenovo A6000i.
EMMC pro have this model but I have only EASY JTAG
  Reply With Quote
Old 06-21-2017, 10:45   #21 (permalink)
Freak Poster
 
$ktelecom's Avatar
 
Join Date: Apr 2007
Location: searching ....
Age: 9
Posts: 490
Member: 484060
Status: Offline
Sonork: 100.1596821
Thanks Meter: 372
Quote:
Originally Posted by NoName® View Post
EasyJtag v2.5.1.0 Released

GUI/CORE changes:

- Partition resize dialog added (Short Guide).
- Partition delete function added.
- Partition Table CRC Repair Added.
- Partition List load fixed.
- Sandisk SmartReport reading (iNAND_Extreme_SDIN9DW4 * ).
- SDHC SD Card support fixed.
- eMMC Core bugs fixed.
- Log bold font after clear log fixed.
- EasyJTAG new hardware fw 2.02 beta added


* You can read description if a Sandisk SMART Report here

New Phones/ISP eMMC pinouts added:

- ALCATEL OT-5020N (ISP eMMC Pinout)
- AMAZON FIRE TV (ISP eMMC Pinout)
- ANDROMAX T INNOS AD682 (ISP eMMC Pinout)
- ARTEL AD-5 (ISP eMMC Pinout)
- ASUS FONEPAD 7 K00E ME372CG (ISP eMMC Pinout)
- ASUS FONEPAD 7 ME175CG (ISP eMMC Pinout)
- ASUS FONEPAD K012 (Read/Write/Dump/ISP eMMC Pinout)
- ASUS MEMOPAD 7 K01A (Read/Write/Dump/ISP eMMC Pinout)
- ASUS MEMOPAD 7 ME70CX (ISP eMMC Pinout)
- ASUS TF700T (ISP eMMC Pinout)
- ASUS ZENFONE 5 T00F (Read/Write/Dump/ISP eMMC Pinout)
- ASUS ZENFONE 5 T00P KL (Read/Write/Dump/ISP eMMC Pinout)
- DNS P102G (ISP eMMC Pinout)
- FLY LIFE CONNECT 10.1 3G (ISP eMMC Pinout)
- HTC 8S (ISP eMMC Pinout)
- HTC 8X (Read/Write/Dump/ISP eMMC Pinout)
- HTC BUTTERFLY X920E PL99300 (ISP eMMC Pinout)
- HTC DESIRE 200 PO60100 (ISP eMMC Pinout)
- HTC DESIRE 600 PO49110 (Read/Write/Dump/ISP eMMC Pinout)
- HTC DESIRE 601 DUAL SIM (ISP eMMC Pinout)
- HTC DESIRE 610 (Read/Write/Dump/ISP eMMC Pinout)
- HTC DESIRE 616 DUAL SIM NAVY (Read/Write/Dump/ISP eMMC Pinout)
- HTC DESIRE 626 (Read/Write/Dump/ISP eMMC Pinout)
- HTC DESIRE 626N (Read/Write/Dump/ISP eMMC Pinout)
- HTC DESIRE C PL01100 (ISP eMMC Pinout)
- HTC DESIRE D618W (ISP eMMC Pinout)
- HTC DESIRE EYE M910N (Read/Write/Dump/ISP eMMC Pinout)
- HTC DESIRE V REV02M-B (Read/Write/Dump/ISP eMMC Pinout)
- HTC DROID INCREDIBLE 2 ADR6350 PG32100 (ISP eMMC Pinout)
- HTC EVO 3D X515M SHOOTER PG86300 (Read/Write/Dump/ISP eMMC Pinout)
- HTC ONE 802D PN075200 (ISP eMMC Pinout)
- HTC ONE DS PN07710 (Read/Write/Dump/ISP eMMC Pinout)
- HTC ONE M4 MINI (ISP eMMC Pinout)
- HTC ONE M5 MINI (ISP eMMC Pinout)
- HTC ONE M8 OP6BIMG (ISP eMMC Pinout)
- HTC ONE MINI 2 (ISP eMMC Pinout)
- HTC ONE MINI 601N PO58200 (ISP eMMC Pinout)
- HTC ONE MINI (ISP eMMC Pinout)
- HTC ONE V T320E PK76100 (Read/Write/Dump/ISP eMMC Pinout)
- HTC SENSATION XE Z715E PG58130 (Read/Write/Dump/ISP eMMC Pinout)
- HTC T329D (ISP eMMC Pinout)
- HUAWEI ASCEND G600 HONOR PRO U8950 (ISP eMMC Pinout)
- HUAWEI ASCEND G6-U10 (ISP eMMC Pinout)
- HUAWEI ASCEND G730-U10 (ISP eMMC Pinout)
- HUAWEI ASCEND MT7-L09 (Read/Write/Dump/ISP eMMC Pinout)
- HUAWEI ASCEND Y300-100 (ISP eMMC Pinout)
- HUAWEI C8812 (Read/Write/Dump/ISP eMMC Pinout)
- HUAWEI C8813D (ISP eMMC Pinout)
- HUAWEI C8813Q (ISP eMMC Pinout)
- HUAWEI C8950D (ISP eMMC Pinout)
- HUAWEI G520 (Read/Write/Dump/ISP eMMC Pinout)
- HUAWEI HONOR 4X CHE2-L11 (Read/Write/Dump/ISP eMMC Pinout)
- HUAWEI T8620 (ISP eMMC Pinout)
- HUAWEI U8825D (ISP eMMC Pinout)
- HUAWEI U9200 (ISP eMMC Pinout)
- HUAWEI Y300 (Read/Write/Dump/ISP eMMC Pinout)
- HUAWEI Y550-L03 (Read/Write/Dump/ISP eMMC Pinout)
- JIAYU JY-F1 (ISP eMMC Pinout)
- KARBONN A9P (ISP eMMC Pinout)
- LENOVO A1000L-F (ISP eMMC Pinout)
- LENOVO A3000-H (ISP eMMC Pinout)
- LENOVO B6000 (ISP eMMC Pinout)
- LENOVO S898T (ISP eMMC Pinout)
- LG D290AR (Read/Write/Dump/ISP eMMC Pinout)
- LG D390 (ISP eMMC Pinout)
- LG F350S (Read/Write/Dump/ISP eMMC Pinout)
- LG F460L (ISP eMMC Pinout)
- LG H343 (ISP eMMC Pinout)
- LG K600 (Read/Write/Dump/ISP eMMC Pinout)
- LG LS665 (Read/Write/Dump/ISP eMMC Pinout)
- MOTOROLA MZ608 (ISP eMMC Pinout)
- MOTOROLA XT1021 (Read/Write/Dump/ISP eMMC Pinout)
- MOTOROLA XT1032 (Read/Write/Dump/ISP eMMC Pinout)
- NOKIA LUMIA 635 RM-975 (Read/Write/Dump/ISP eMMC Pinout)
- OPPO R1100 (ISP eMMC Pinout)
- OPPO R3007 (ISP eMMC Pinout)
- SAMSUNG GT-I9060M (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG GT-I9080L (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG SHV-E210L (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG SM-A500M (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG SM-G3812 (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG SM-G530BT (ISP eMMC Pinout)
- SAMSUNG SM-J500F (ISP eMMC Pinout)
- SKY A760S (Read/Write/Dump/ISP eMMC Pinout)
- SONY LT26 (ISP eMMC Pinout)
- SONY XPERIA M2 D2303 (Read/Write/Dump/ISP eMMC Pinout)
- SONY XPERIA Z2 C6503 (ISP eMMC Pinout)
- XIAOMI MI3W (Read/Write/Dump/ISP eMMC Pinout)
- ZTE V811 (Read/Write/Dump/ISP eMMC Pinout )





Z3x Team Plz Add Sony Model I have Sony c4 e5333 so plz support dump and pinout





br,
$ktelecom
  Reply With Quote
The Following User Says Thank You to $ktelecom For This Useful Post:
Old 06-21-2017, 15:07   #22 (permalink)
No Life Poster
 
shabirahmad22's Avatar
 
Join Date: Nov 2014
Location: (pakistan)(chichawatni)
Age: 32
Posts: 522
Member: 2293727
Status: Online
Sonork: 100.1660528
Thanks Meter: 351
huawei G730-U10

huawei G730-U10

  Reply With Quote
The Following User Says Thank You to shabirahmad22 For This Useful Post:
Old 06-21-2017, 15:20   #23 (permalink)
No Life Poster
 
Join Date: Dec 2005
Location: syria
Posts: 935
Member: 205475
Status: Offline
Thanks Meter: 170
error

at jtag plus

Code:
28.05.2017 (ver 1.0.0.47)
   Fix:   Bugs that have been found through your crash report
   Fix:   Searching for partitions when scanning MBR
   Fix:   Searching for MassStorage devices
   Add:  AutoUpdate for the program

HiPower mode is OFF
CMD Pullup Level: 1206 mV
CMD Active Level: 2536 mV
EMMC Device Information :
EMMC CID: 1501004D414732474103D70A6B233050
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: D70A6B23 , rev. 03
EMMC NAME (HEX): 4D4147324741
   EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Backup saved: MAG2GA_D70A6B23_20170621_161453.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: bota0, [000000400000 - 000000800000], size: 000000400000
Partition: bota1, [000000800000 - 000000C00000], size: 000000400000
Partition: efs, [000000C00000 - 000002000000], size: 000001400000
Partition: param, [000002000000 - 000002800000], size: 000000800000
Partition: boot, [000002800000 - 000003000000], size: 000000800000
Partition: recovery, [000003000000 - 000003800000], size: 000000800000
Partition: radio, [000003800000 - 000005800000], size: 000002000000
Partition: cache, [000005800000 - 000065800000], size: 000060000000
Partition: system, [000065800000 - 000105800000], size: 0000A0000000
Partition: hidden, [000105800000 - 000128800000], size: 000023000000
Partition: ota, [000128800000 - 000129000000], size: 000000800000
Partition: userdata, [000129000000 - 0003AB400000], size: 000282400000
GPT header successfully parsed

Get firmware version

Brand = samsung
Model = GT-N5100
Phone platform = exynos4
CPU Abi = armeabi-v7a
Android release = 4.4.2
Firmware version = KOT49H.N5100XXDNH3
Firmware date = Fri Aug 29 16:49:09 KST 2014


at easy jtag

Code:
Compression is ON
Z3X EasyJtag Software ver. 2.5.1.0
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 0100801AB3C0706E, ,FW Ver.: 01.58
CMD Pullup Level:804 mV
CMD Active Level:2743 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD CRC Error 
Done.

at old easy jtag


Code:
Z3X EasyJtag Software ver. 2.5.0.9

Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 0100801AB3C0706E, ,FW Ver.: 01.58
CMD Pullup Level:835 mV
CMD Active Level:2536 mV
Box IO Level:3300 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 1501004D414732474103D70A6B233050
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 03/2013  Rev.0x3
EMMC NAME: MAG2GA , S/N: 3607784227
EMMC NAME (HEX): 4D414732474100 
EMMC ROM1 (Main User Data)   Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits  , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: MAG2GA_3607784227_20170621_1619.extcsd
Warning! Disk size is smaller than the main header indicates! Loading
Caution: invalid backup GPT header, but valid main header!
Caution! After loading partitions, the CRC doesn't check out!
Warning! Main and backup partition tables differ!n
Warning! One or more CRCs don't match. You should repair the disk!
Partition table scan:
 GPT: damaged
Caution: Found protective or hybrid MBR and corrupt GPT.
Real (Hardware) Disk/Image size: 1D5A000 sectors 14.7 GiB 
Soft (Partitioned) Disk/Image size: 1D59FDD sectors 14.7 GiB 
Logical sector size: 0x200  bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30777343
Partition info successfully found
---------------------------------------------
P0 (BOTA0) [0x400000 0x400000] Size: 4.0MB
P1 (BOTA1) [0x800000 0x400000] Size: 4.0MB
P2 (EFS) [0xc00000 0x1400000] Size: 20.0MB
P3 (PARAM) [0x2000000 0x800000] Size: 8.0MB
P4 (BOOT) [0x2800000 0x800000] Size: 8.0MB
P5 (RECOVERY) [0x3000000 0x800000] Size: 8.0MB
P6 (RADIO) [0x3800000 0x2000000] Size: 32.0MB
P7 (CACHE) [0x5800000 0x60000000] Size: 1.500GB
P8 (SYSTEM) [0x65800000 0xa0000000] Size: 2.500GB
P9 (HIDDEN) [0x105800000 0x23000000] Size: 560.0MB
P10 (OTA) [0x128800000 0x800000] Size: 8.0MB
P11 (USERDATA) [0x129000000 0x282400000] Size: 10.35GB
P12 (￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿ￿Ÿᄆ좞岾ࠈ) [0xfffffe01fffffe00 0x200] Size: 512.0B
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0065800000 (2.500GB)
Build ID:  KOT49H
Display Build ID:  KOT49H.N5100XXDNH3
Release ID:  4.4.2
Device Model:  GT-N5100
Device Name:  kona3gxx
Architecture ABI:  armeabi-v7a
Device manufacturer:  samsung
Device Platform:  exynos4
Product ID:  kona3g
Build Description:  kona3gxx-user 4.4.2 KOT49H N5100XXDNH3 release-keys
Samsung CPU:  smdk4x12
---------------------------------------------
Done.
  Reply With Quote
Old 06-21-2017, 15:43   #24 (permalink)
Junior Member
 
Join Date: Jan 2009
Posts: 24
Member: 958990
Status: Offline
Thanks Meter: 2
please give usb Qdloader connection method. LIKE medosa or ATF
  Reply With Quote
The Following User Says Thank You to bah999 For This Useful Post:
Old 06-21-2017, 17:32   #25 (permalink)
Insane Poster
 
Join Date: Jul 2013
Posts: 60
Member: 1971074
Status: Offline
Thanks Meter: 10
repair emmc oppo r2001 ok

Z3X EasyJtag Software ver. 2.5.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2021 mV
CMD Active Level:2279 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Erasing 100000000 bytes from 00000000 ...ROM1
Erase Length has been corrected to 0x0000E9000000 bytes...
Erase Done.

Running:Change BOOT CONFIG...
Z3X EasyJtag Software ver. 2.5.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2021 mV
CMD Active Level:2279 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Writing eMMC Register...
Written: REG : 179 VAL :0 , result 0
Done.

Running:Change BOOT WIDTH...
Z3X EasyJtag Software ver. 2.5.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2021 mV
CMD Active Level:2279 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Writing eMMC Register...
Written: REG : 177 VAL :0 , result 0
Done.

Running:JEDEC: Partitions config burn...
Z3X EasyJtag Software ver. 2.5.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2021 mV
CMD Active Level:2279 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
GP Multiplier: 800000, 8192 Kb, 8Mb
Partition configuration:
No enhanced user data area
User partition write reliability: off
No GP1 partition

GP1 write reliability: on
No GP2 partition

GP2 write reliability: on
No GP3 partition

GP3 write reliability: on
No GP4 partition

GP4 write reliability: on
Partitioning successful, power-cycle to make effective

HW Parts Config Done.

by hw 1.xx and what is hw 2.xx?
  Reply With Quote
Old 06-22-2017, 14:02   #26 (permalink)
Insane Poster
 
Join Date: Jul 2013
Location: Tanzania -Shy-Town
Posts: 82
Member: 1979644
Status: Offline
Sonork: mk47
Thanks Meter: 21
IM a NEW USER
Today ireceived my jtagbox from gsmsaver
  Reply With Quote
The Following User Says Thank You to zamkallytel For This Useful Post:
Old 06-22-2017, 15:37   #27 (permalink)
Insane Poster
 
Join Date: Jul 2013
Location: Tanzania -Shy-Town
Posts: 82
Member: 1979644
Status: Offline
Sonork: mk47
Thanks Meter: 21
hi team
what is this error?
https://www.mediafire.com/?azn69jrxiwagbnb
  Reply With Quote
Old 07-05-2017, 18:36   #28 (permalink)
No Life Poster
 
foufou34's Avatar
 
Join Date: Feb 2008
Location: Algeria
Posts: 1,467
Member: 695274
Status: Offline
Thanks Meter: 779
I HAVE one i8730 8gb remplaced by MVT00M 16 GB all ok but in phone i get only 8gb user data 4.7 GB

i try this update 2.5.1 but i cant resize user data like guide.....i get this error:

Quote:
Partition info successfully found
---------------------------------------------
P0 (MODEM) [0x400000 0x3c00000] Size: 60.0MB
P1 (SBL1) [0x4000000 0x20000] Size: 128.0KB
P2 (SBL2) [0x4020000 0x40000] Size: 256.0KB
P3 (SBL3) [0x4060000 0x80000] Size: 512.0KB
P4 (ABOOT) [0x40e0000 0x200000] Size: 2.0MB
P5 (RPM) [0x42e0000 0x80000] Size: 512.0KB
P6 (BOOT) [0x4360000 0xa00000] Size: 10.0MB
P7 (TZ) [0x4d60000 0x80000] Size: 512.0KB
P8 (PAD) [0x4de0000 0x80000] Size: 512.0KB
P9 (PARAM) [0x4e60000 0xa00000] Size: 10.0MB
P10 (EFS) [0x5860000 0xda0000] Size: 13.625MB
P11 (MODEMST1) [0x6600000 0x300000] Size: 3.0MB
P12 (MODEMST2) [0x6900000 0x300000] Size: 3.0MB
P13 (SYSTEM) [0x6c00000 0x54600000] Size: 1.318GB
P14 (USERDATA) [0x5b200000 0x12ec00000] Size: 4.730GB
P15 (PERSIST) [0x189e00000 0x800000] Size: 8.0MB
P16 (CACHE) [0x18a600000 0x34800000] Size: 840.0MB
P17 (RECOVERY) [0x1bee00000 0xa00000] Size: 10.0MB
P18 (FOTA) [0x1bf800000 0xa00000] Size: 10.0MB
P19 (HIDDEN) [0x1c0200000 0x10a00000] Size: 266.0MB
P20 (BACKUP) [0x1d0c00000 0x600000] Size: 6.0MB
P21 (FSG) [0x1d1200000 0x300000] Size: 3.0MB
P22 (SSD) [0x1d1500000 0x2000] Size: 8.0KB
P23 (GROW) [0x1d1502000 0x1d9efe000] Size: 7.404GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0006C00000 (1.318GB)
---------------------------------------------
Done.

Warning! Disk size is smaller than the main header indicates! Loading
Caution: invalid backup GPT header, but valid main header!
Caution! After loading partitions, the CRC doesn't check out!
Warning! Main and backup partition tables differ!n
Warning! One or more CRCs don't match. You should repair the disk!
Partition table scan:
GPT: damaged
Caution: Found protective or hybrid MBR and corrupt GPT.
Current partition is not supported...
You will need to delete this partition or resize it in another utility.
  Reply With Quote
Old 07-07-2017, 21:17   #29 (permalink)
No Life Poster
 
foufou34's Avatar
 
Join Date: Feb 2008
Location: Algeria
Posts: 1,467
Member: 695274
Status: Offline
Thanks Meter: 779
i detected bug in resize partition....
you c'ant resize any medium partition in the liste . it work juste for latest partition in the list

if delet latest partion then it work with previous partition ( you can resize only latest partition) so if you need to resize USER DATA partition not work get this message ( partition not supported ...). you need to delete all next partition until user data (wile be latest ) then you can resize user data partition.....





  Reply With Quote
Old 07-07-2017, 21:50   #30 (permalink)
No Life Poster
 
foufou34's Avatar
 
Join Date: Feb 2008
Location: Algeria
Posts: 1,467
Member: 695274
Status: Offline
Thanks Meter: 779
in the Guide of resizing GPT partitions ...... the USER DATA is latest partition in the list

but if USER DATA in medium so you c'ant resize

  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 11:13.



Powered by Searchlight © 2017 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.44527 seconds with 8 queries

SEO by vBSEO