EasyJtag Classic Tool 3.1. Released. New phones added

[joseluisalvarez]

Originally Posted by NoName®

Reconnect box and wait until all leds blink. Then launch software or try to update it on another system.

hello I also had the same problem but already the solutions the problem is due to the new update but the solution is easy remove the sim card from the box you enter in another reader you go to the shell check that you read the sim card once you the read you open the program of the EasyJTAG Tool and you will leave reprogramming box then you will leave that does not have sim card you remove it from the reader that you had it and you go back to enter the box and you open the program and you are ready to work usually

[yuluosheng]

Hopefully, the easy jtag addition will allow you to read the partition functionality separately and write the partition functionality separately, saving the user a lot of time to fix it.

[chmsc_ELX]

Huawei G750-U10 EMMC pinout and dump?

[layder]

Originally Posted by chmsc_ELX

Huawei G750-U10 EMMC pinout and dump?

It's a Mesiatek phone - it's simple restore with Flashtool and blank eMMC

[SILVER ANJEL]

Originally Posted by layder

It's a Mesiatek phone - it's simple restore with Flashtool and blank eMMC

Hi.
i have desolder emmc from a dead phone for extract user data.
the easy jtag recognize it like emmc bat cant create partition table.
is any solution for this ?
i cant resolder back becouse damage in print circuit.
is any tool for extract user data and especialy photos and videos?

[layder]

Originally Posted by SILVER ANJEL

Hi.
i have desolder emmc from a dead phone for extract user data.
the easy jtag recognize it like emmc bat cant create partition table.
is any solution for this ?
i cant resolder back becouse damage in print circuit.
is any tool for extract user data and especialy photos and videos?

post log, please.

you emmc may be dead