also called emmc identify on UFI :D

i think can't. that's hardware only have data 0.hardware is old.

Hi,
eMMC spec can use only 1 bit, 4 bit or 8 bit data. I can add 4 bit data flashing, but flashing speed is limited by full speed USB hardware (~1 MB/s).
All eMMC data lines support (1bit, 4 bit and 8 bit) with high speed USB hardware (~20 MB/s) will be available in new Easy-Jtag Plus box.
Best Regards

oh my *** this is really good update to me z3x best of the best !!!!

Hi,
Thanks for quick reply PS,
my mistake sorry, eMMC support 3 data bus widths, 1bit (default), 4bit, 8bit :D
so we need new Easy-Jtag Plus box, while we waiting it release, can we get more speed to the classic box?
(maybe another silly question)
br,
Iwan

here is experia z5 i want unlock frp via emmc possible
 

here is sony experia z5 i want unlock frp via emmc esocket possible ?
waiting for reply inbox me any new beta software

Is Qualcomm HS-USB QDLoader 9008 solution?

Bug in software
 

EMMC_tool Suite - Write by vendor - LG - Write - can not open file .tot
EMMC live

Hi,
We already fixed some can't open .tot file bugs.
You can download easyjtag_emmc_plus_1.0.0.36.exe from support.
Best Regards

Finaly Its Arrive Thanks Team

a very powerfull update please update emmc pin out for those phone

emmc plus 1.0.0.36 i try to reset factory emmc skhynix and sandisk still no luck "Error: Unknown error"

Everything is fine

what emmc adapter you use
i cant connect via moorc emmc adapter

i need pin out for huawei hol-u19 emmc pin out

hello team plz share how to connect MTK eMMC ..........!!!!

so there is a coming new Easy Jtag Plus box for emmc tool. :D

if possible make auto choose voltage (vcc and vccq), frequence (clock), also update emmc firmware
thx

So you're saying that current box doesn't support USB 2.0? That's strange cause i've seen speeds at about 2MB/s when reading full dumps for data recovery.

On the other hand, will users be able to just buy a new box and keep the current card and activations going or it's gonna be a whole, complete set?

Hi,

Current box use CPU LPC1768 with Full Speed USB (12 Mbit Link). So maximum theoretical speed is 12 / 8 = 1.5 MB/s, but due to USB bus protocol and CPU's hardware delays real speed is 0.8 - 1.2 MB/s. Fast box hardware require another CPU with High Speed USB support (480 Mbit Link). High Speed USB (480 Mbit Link) real speed is 20-25 MB/s. You can see speed 2MB/s, because we are using data compression technology and write optimization for empty blocks.
We did everything to make current Easy-Jtag box as fast as possible, but progress never stop !

We are planning (means only planning) to develop Easy Jtag Plus hardware with High Speed USB support.
New box approximate tested speed:
1 bit eMMC ISP interface up to 2.5 MB/s (limited by maximum clock rate and 1 bit data line),
8 bit eMMC interface up to 20 MB/s (use eMMC socket on maximum clock rate).

We are not planning to discontinue old box production immediately after new box production starts.
We are not planning to stop support for current box, after release new box (software, protocol, drivers are the same).
We are not planning any additional cost activations (all current Easy-Jtag users will use new box with current card or keep to use old box).

Best Regards
P.S. All other details and features after release. Just use current box, download new advanced updates and make money now ;)

Well, that make sense. One more question about that planned new hardware. Are there plans to support UFS type memory with it?

great update team...
please add flashing feature via usb in easy jtag if possible.

Can you please add eMMC pinout finder?
In current hardware or maybe in new, but with this feature we can find new pinouts by ourselves. Very useful I think.

very very nice n great update..many thanks for z3x team

really good update
keep it up

mediatek emmc repair
 

mediatek emmc repair video help.

and full guide need.

Can you add flashing feature via usb in easy jtag if possible?

i think very dificult for build emmc finder. but i have trick for find that without remove emmc for normal hardware phone with normal emmc.

1. emmc pinout it's always around emmc, but clk pin some phone placed
around cpu
2. find 1.8v and 2.8v -3.3v around emmc with usb connect to phone
vcc always conected to capasitor smd with brown collor smd
and conect ground and found vcc 1.8 and 2.8 - 3.3v to box
3. just find clk and cmd pin. box can read emmc with eror data line
a. clk always connect to 0 ohm resistor smd with black color smd
search 0 ohm resistor around emmc/cpu
b. cmd always conect to 1,8v with 9-11 kohm resistor smd
search 9-11 kohm resistor around emmc
4. find cmd and clk pin
a. if you just find cmd pin, you can try used noodle for clk pin for search
pin, when you try some pin, klik detect emmc on easy jtag tool until
detect emmc with eror data line.
b. if you just find clk pin, you can try used noodle for cmd pin for search
pin, when you try some pin, klik detect emmc on easy jtag tool until
detect emmc with eror data line.
c. when box can detect emmc with eror data line, remove noddle and
solder to that pin
5. find dat0 pin.
used noddle for search dat0, dato pin always conect to
1.8v vcc with resistor. some phone used resistor 9-11 kohm, some
phone not used resistor but have pin resistor on phone board without
resistor installed on phone board.
when you want try some dat0 pin, klik detect emmc on easy jtag tool,
until detected emmc without eror data line.

some phone not have complete emmc pinot, like samsung ace 3 gt-s7270
for search resistor don't forget disconect phone from any vcc
for search posisition resistor reference you must see many emmc pinout from another phonr from reference.

sory for my bad english. my be some one can make this better.

can you share emmc direct pinout oppo r2001 and oppo r831k. thanks

oppo R1001 wipe fail, formar not work?
http://i258.photobucket.com/albums/h...psey1fd7g9.png

yes, same problem with me..!
but some people work with this :
- erase emmc using 2.4.0.0.
- SET WRITE REL USER
- WR_REL_GP1
- WR_REL_GP2
- WR_REL_GP3
- WR_REL_GP4
- in colum confirmation type CONFIRM
- and write extCSD

maybe it work, please correct me if am wrong

Yes, I can try the way you tell me, it can be usefull also and sincerely I didn't thought about it.
But I think those operations can be simplified with some development from team. Remember that already there is one box that can do it, ATF Box, but I would like to see this feature in our great Easy JTAG.

mediatek emmc repair halp
 

z3x team plz mediatek emmc repair need solution

Read functions carefully. That function only available for SAMSUG eMMC, you're trying to fomat SKHYNIX eMMC.

Thank you easy jtag team great work

as i said, they suggested to use easy jtag ver. 2.4.0.0., am not saying emmc tool suite!
was been try and worked for me

Thank you easy jtag team great work

good update but need more modify
need format and update frim for skhynix emmc .
need guide to repair sony mtk cpu and htc mtk cpu
i try to write htc 616 scatter but get errors

try this, it work for me writing to skhynix...

- choose easy jtag ver. 2.4.0.0
- in FLASHER tab erase emmc card
- wait untill all done and then
- go to eMMC hw partition
- SET WRITE REL USER
- WR_REL_GP1
- WR_REL_GP2
- WR_REL_GP3
- WR_REL_GP4
- in colum confirmation type CONFIRM
- and write extCSD.

- after that go to emmc tool suite, and write full dump or write by vendor, and done.

this methode work perfectly for me

Samsung SM-G531F dead in Flash.May I recovery that handset with this update?
 

Samsung SM-G531f dead in Flashing.Handset is on condition when it was given from customer.I was just trying to upgrade OS.It was failed in Odin Flasher in beginning process.Now handset is not power on and it was not came download mode also.It was not detected PC also.In this dead condition may I recover that handset?Please any body tell me that?It was so helpful to me.After confirmation I was immediatly buy this box.Thank you.

im from pakistan please any body gi me resellers list in my country

THANS IN ADVANCE

Plz give me the sulotion i wanto write dload file to emmc with qoulcom cpu when i dont have dump thanks

i have same question with you :D

mediatek emmc repair video upload

i know this update is only warming up for easy jtag and am waiting for bigest update from easy jtag....bravo easy jtag

eMMC can use only 1, 4 or 8 bits. Not 2.

hi Z3x team
can this update repair and flash dump any emmc for mtk except samsung emmc like sandisk,kingston,skhynix ?

Thanks

hi Z3x team
can this update repair and flash dump any emmc for mtk except samsung emmc like sandisk,kingston,skhynix ?

Thanks

great update >>>>>>>>>>.