EasyJTAG MTK Scatter Support + Hard FRP Update Ready!

[dark140]

Please. How do I work on Alusband
usb or not

[yales666]

I can't write scatter files to the EMMC, always showing

write failed address 0x0000008000

[samadyo]

why easy jtag plus sign appears administrator error when activated deepfreeze ?

[yales666]

HELP : Can' write MTK Scatter file
I can't write scatter files to the EMMC, always showing

Error: eMMC has a small size

[samadyo]

HiPower mode is OFF
CMD Pullup Level: 2743 mV
CMD Active Level: 2794 mV
Can't init device. Reason: CMD Timeout Error


what's the solution? alternated scatter files remain so

[Multi-COM]

Originally Posted by KrzychuG

Logic says that as long as you have pinout for ISP connection you can solder to mainboard. If there's no pinout available for the phone you need, then taking out the eMMC is the only way.

There's no "universal" pinout if that's what you meant and MTK phones that does communicate via USB can mostly be done via USB only so no changes here.

It's not really true..... you can find eMMC ISP without any soldering using few methods.... we will soon show to perform those using VR-Table

[chmsc_ELX]

JTAG pinout for alcatel 7040E MT6582..

phone prob: Logo restart no boot mode/ key combination failed to detect phone no reactio on device manager

[tsabila]

Originally Posted by vikboston

Hi,
eMMC spec can use only 1 bit, 4 bit or 8 bit data. I can add 4 bit data flashing, but flashing speed is limited by full speed USB hardware (~1 MB/s).
All eMMC data lines support (1bit, 4 bit and 8 bit) with high speed USB hardware (~20 MB/s) will be available in new Easy-Jtag Plus box.
Best Regards

so..., is it possible to enable 4bit data lines to current box?? due to there many
emmc socket / adapter compatible with current easy jtag box??

[printis]

good job great team .................................

[KrzychuG]

Originally Posted by Multi-COM

It's not really true..... you can find eMMC ISP without any soldering using few methods.... we will soon show to perform those using VR-Table

Yes, you're right, you can check schematics if possible, try on another board or just use a trial and error method like described here. It's easier with your vr-table as you don't have to solder anything, but there are also phones that has at least one of the required pins connected directly to the CPU (like Lumia 435 with data lines) and it's a no-go anyway.

[Bond.Flasher]

Good Update from Team Easy-Jtag....I love Easy-Jtag

[archy906]

great update easy jtag, next update please add feature reset emmc for sk hynix. sandisk etc, repartition non samsung emmc, and feature from qdloader 9008 to 9006 via usb, cause nothing possible for easy jtag.
bravo more power for easy jtag....

[dark140]

Please. How do I work on Alusband
usb or not

[pinmobilepr]

i wait 3 mounth for Z3 emmc update write by vendor MTK, LG, Samsung.....anythings qualcomm.... this is a big solutions , big thank for Z3 Team .i love you

[Multi-COM]

Originally Posted by KrzychuG

Yes, you're right, you can check schematics if possible, try on another board or just use a trial and error method like described here. It's easier with your vr-table as you don't have to solder anything, but there are also phones that has at least one of the required pins connected directly to the CPU (like Lumia 435 with data lines) and it's a no-go anyway.

If there are no full pinout needed for direct (so eMMC ISP) then ofcurse you cannot locate it but there is also other way not described here using oscilloscope and signals tracing - similar method are using for compliance test/debuging eMMC....