EasyJTAG MTK Scatter Support + Hard FRP Update Ready! - Page 12 - GSM-Forum

tarique ali · 10-29-2016, 21:00

Plz add lg g4 h810 modll. .??

joel_3mo · 10-30-2016, 08:37

Quote:

Originally Posted by vikboston

Hi,
eMMC spec can use only 1 bit, 4 bit or 8 bit data. I can add 4 bit data flashing, but flashing speed is limited by full speed USB hardware (~1 MB/s).
All eMMC data lines support (1bit, 4 bit and 8 bit) with high speed USB hardware (~20 MB/s) will be available in new Easy-Jtag Plus box.
Best Regards

Quote:

Originally Posted by tsabila

so..., is it possible to enable 4bit data lines to current box?? due to there many
emmc socket / adapter compatible with current easy jtag box??

Read red text. It is not hard and avoid asking again and again the same question.
Makes no sense to add such thing when you don't obtain any benefits of it.

tattoum · 10-31-2016, 09:34

hi, is it possible to reset FRP with emmc tool for j700f J700FXXU3BPJ1 ?

bs123 · 11-01-2016, 10:02

After pressing "Check eMMC" button, the program shuts down.
With Easyjtag_emmc_plus 1.0.0.37 all is ok.

KrzychuG · 11-01-2016, 11:12

Quote:

Originally Posted by vikboston

Hi,
eMMC spec can use only 1 bit, 4 bit or 8 bit data. I can add 4 bit data flashing, but flashing speed is limited by full speed USB hardware (~1 MB/s).
All eMMC data lines support (1bit, 4 bit and 8 bit) with high speed USB hardware (~20 MB/s) will be available in new Easy-Jtag Plus box.

Out of curiosity, i haven't tried that, but can we use DAT1 or DAT2 etc instead of DAT0 or if it gets damaged during extracting the eMMC from the board to read the data out of the chip?

katemkoo · 11-01-2016, 12:37

oky,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

zuhrul · 11-02-2016, 01:27

this update is very very nice...

Multi-COM · 11-02-2016, 21:27

Quote:

Originally Posted by KrzychuG

Out of curiosity, i haven't tried that, but can we use DAT1 or DAT2 etc instead of DAT0 or if it gets damaged during extracting the eMMC from the board to read the data out of the chip?

Sorry, No - this is not possible... please refer to the ONFI standard (Home - ONFi) which all major NAND supplier accepts (Samsung, Hynix, ScanDisk, Toshiba ....... ) and you will know why primary and obligatory data bus signal is DATA 0 - this mainly reflect to bus timing

tungkick · 11-04-2016, 01:05

Pls add easy jtag support emmc qualcomm 820 of samsung. Need direct flash with odin new.

reza.moheyisen · 11-04-2016, 16:04

this is big update for easy jtag box . thanks

mdsajju86 · 11-26-2016, 07:05

hello team plzZ share how to connect MTK eMMC

echoakira · 11-26-2016, 22:02

dear easy jtag delepment...please add factory tool for intel board and spreadrum cpu devices...for intel can brick cloverview device detect on device manager like lenovo k900 and asus etc.......thanks

faizafirdous · 11-28-2016, 11:47

Sir I want to know that when new hardware box well be available in market
new advanced eMMC Plus ToolBox.

mobjle2 · 12-03-2016, 18:07

this update is very very nice...

es3prodigy · 12-15-2016, 00:59

I think one of the bigest disadvantages of easy jtag box is the lak of complete toturial or manual witch can show the users how to apply and use it.
I would be so glad if some one introduce such a sources that can rearn me how to get all from Easy jtag box.

11-01-2016, 10:02	#169 (permalink)
bs123 Insane Poster Join Date: Sep 2011 Location: rusia Posts: 82 Member: 1656416 Status: Offline Thanks Meter: 23	Easyjtag_emmc_plus 1.0.0.38 turns off After pressing "Check eMMC" button, the program shuts down. With Easyjtag_emmc_plus 1.0.0.37 all is ok.

12-15-2016, 00:59	#180 (permalink)
es3prodigy Junior Member Join Date: Oct 2013 Posts: 1 Member: 2056667 Status: Offline Sonork: 100.1648468 Thanks Meter: 0	I think one of the bigest disadvantages of easy jtag box is the lak of complete toturial or manual witch can show the users how to apply and use it. I would be so glad if some one introduce such a sources that can rearn me how to get all from Easy jtag box. Last edited by es3prodigy; 12-15-2016 at 01:06.

10-29-2016, 21:00	#166 (permalink)
tarique ali Freak Poster Join Date: Dec 2013 Location: LARKANA PAK Age: 35 Posts: 118 Member: 2080580 Status: Offline Thanks Meter: 42	Plz add lg g4 h810 modll. .??

10-31-2016, 09:34	#168 (permalink)
tattoum No Life Poster Join Date: Oct 2002 Location: tunisia Posts: 771 Member: 16625 Status: Offline Sonork: 1578753 Thanks Meter: 161	hi, is it possible to reset FRP with emmc tool for j700f J700FXXU3BPJ1 ?

11-01-2016, 12:37	#171 (permalink)
katemkoo Junior Member Join Date: Sep 2015 Posts: 4 Member: 2453380 Status: Offline Thanks Meter: 0	oky,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

11-02-2016, 01:27	#172 (permalink)
zuhrul Junior Member Join Date: Apr 2013 Posts: 1 Member: 1919298 Status: Offline Thanks Meter: 0	this update is very very nice...

11-04-2016, 01:05	#174 (permalink)
tungkick Freak Poster Join Date: Nov 2012 Age: 38 Posts: 132 Member: 1836541 Status: Offline Thanks Meter: 92	Pls add easy jtag support emmc qualcomm 820 of samsung. Need direct flash with odin new.

11-04-2016, 16:04	#175 (permalink)
reza.moheyisen Junior Member Join Date: Nov 2016 Location: Iran Posts: 3 Member: 2644984 Status: Offline Thanks Meter: 1	this is big update for easy jtag box . thanks

11-26-2016, 07:05	#176 (permalink)
mdsajju86 Crazy Poster Join Date: Sep 2007 Location: india Posts: 53 Member: 584215 Status: Offline Sonork: 9831735786 Thanks Meter: 14	hello team plzZ share how to connect MTK eMMC

11-26-2016, 22:02	#177 (permalink)
echoakira Junior Member Join Date: Oct 2012 Location: indonesian Posts: 7 Member: 1824125 Status: Offline Thanks Meter: 3	dear easy jtag delepment...please add factory tool for intel board and spreadrum cpu devices...for intel can brick cloverview device detect on device manager like lenovo k900 and asus etc.......thanks

11-28-2016, 11:47	#178 (permalink)
faizafirdous No Life Poster Join Date: Apr 2010 Location: Paradise on Earth Posts: 676 Member: 1281866 Status: Offline Thanks Meter: 330	Sir I want to know that when new hardware box well be available in market new advanced eMMC Plus ToolBox.

12-03-2016, 18:07	#179 (permalink)
mobjle2 Junior Member Join Date: May 2013 Posts: 19 Member: 1929148 Status: Offline Thanks Meter: 7	this update is very very nice...