EasyJtag Release v2.2.0.1. Very big Update. Lot of phones and changes!!!

[kopito]

Originally Posted by Repair4u

Please add lg d855 ,if possible

Supported long time ago

Enviado desde mi SM-G925I mediante Tapatalk

[kopito]

Originally Posted by Kashembd

good update..........good job......

please update sm-j700f dead bood repear.......

Supported long time ago

Enviado desde mi SM-G925I mediante Tapatalk

[MARVZ_TG]

any one tested repair boot file for j700h

Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 161609229E54864B, ,FW Ver.: 01.55
CMD Pullup Level:474 mV
CMD Active Level:2351 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower™ mode is off!
eMMC Device Information
EMMC CID : 1101003430303037330084DA289962D6
EMMC CSD : D07E00320F5903FFFFFFFFE78A4000D0
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 06/2015 Rev.0x0
EMMC NAME: 400073 , S/N: 2228889753
EMMC NAME (HEX): 34303030373300
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: 400073_2228889753_20160715_1950.extcsd
Done.

[mfk1990]

upload setup on support.
big big upadte easy jtag

[sureshlion]

Nice update team

Regards
Kanth.suresh

[zLenin]

I need help with this error team

[feritk]

yes big update very thanks but please add more video or manual for how to use

[mr.omphonx]

i need pinout emmc for LG VS930
on support not show CMD

Hi,
Use CMD pinout from here:
https://gyazo.com/b7d28bfa3774ab6f53605635ee552e79
Thank you for cooperation!
Best Regards

[iory]

Originally Posted by zLenin

I need help with this error team

you can't open bin file it's not supported for this job

[vikboston]

Originally Posted by iory

you can't open bin file it's not supported for this job

Hi,
At this moment Easy Repair tab works only with JTAG interface and .rcp files.
Steps to repair phone via eMMC direct interface:
1. Press Download Files From Support ;-) button in Easy Repair Tab. After that type part of phone name "SM-G360M" in <Type part of filename here >", then save searched file (typically .rar or .zip ).
2. Unpack .rar or .zip file, then use eMMC Tool tab
3. You can use Region tab to search partitions in dump (Image:Select eMMC Image file *.bin), select required partitions and write into eMMC.
We will add automatic search support file by selected model and one click repair via eMMC interface in next updates.
Thank you for cooperation and reporting problems.
Best Regards

[zLenin]

Originally Posted by iory

you can't open bin file it's not supported for this job

as would be the correct method of writing Dumps

[vikboston]

Originally Posted by zLenin

as would be the correct method of writing Dumps

Easy Repair works only for JTAG interface .rcp file.
For eMMC direct, please unpack support files and use eMMC direct Flasher.
Best Regards

[andreiza]

Originally Posted by nurulfaiq

sorry after disable avast antivirus problem solved

ohhhhh nooooo..............

[taliyusif]

please update sm-j700f dead bood repear

[Fusion Rock]

support МOTOROLA MOTO XT1022 (ISP Pinout, Dumps)
Nice update