GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 03-01-2014, 13:09   #16 (permalink)
No Life Poster
 
Join Date: Nov 2008
Location: saudi arabia
Posts: 3,661
Member: 904809
Status: Offline
Sonork: 100.1615464
Thanks Meter: 677

plz upload any video,,to back up dump file,,read full dump from i9070

and write to an other ,,,how to
  Reply With Quote
Old 05-29-2014, 12:15   #17 (permalink)
Freak Poster
 
Join Date: Mar 2008
Location: Nepal (Dr.Mobile)
Age: 31
Posts: 100
Member: 724757
Status: Offline
Sonork: 100.1627486
Thanks Meter: 15
Talking plz upload more video

emmc how to repair for easy jtag

and more video upload plzzzzzzzz easy jtag Team
  Reply With Quote
Old 05-30-2014, 09:46   #18 (permalink)
Major Poster
 
Join Date: Apr 2011
Location: Kerala,DRC
Posts: 46
Member: 1549945
Status: Offline
Thanks Meter: 2
Donate money to this user
Dear team,

how to repair dead boot in GT-I9505

Now the phone not detected by odin

in device manager which shows Qualcomm HS-USB QDLoader 9008 how to solve this
  Reply With Quote
Old 08-05-2014, 02:38   #19 (permalink)
No Life Poster
 
Join Date: Feb 2010
Posts: 500
Member: 1227040
Status: Offline
Sonork: 100:1654728
Thanks Meter: 32
Does Easy-Jtag compatible with Dolphin Clip for Nokia Lumia's?
  Reply With Quote
Old 08-05-2014, 06:57   #20 (permalink)
Junior Member
 
Join Date: Jun 2014
Location: malaysia
Posts: 13
Member: 2199063
Status: Offline
Sonork: [email protected]
Thanks Meter: 5
yes plz upload any video,,to back up dump file,,read full dump from i9070

and write to an other ,,,how to
  Reply With Quote
Old 08-11-2014, 21:35   #21 (permalink)
No Life Poster
 
Join Date: Nov 2008
Location: saudi arabia
Posts: 3,661
Member: 904809
Status: Offline
Sonork: 100.1615464
Thanks Meter: 677
plz upload any samsung ,read full dump and write full dump,,
plz explain,,about adreses,which adress sellect in read full dump
  Reply With Quote
Old 10-27-2014, 03:04   #22 (permalink)
Freak Poster
 
viewprofile's Avatar
 
Join Date: Jul 2012
Posts: 391
Member: 1784151
Status: Offline
Sonork: 0
Thanks Meter: 53
This is my firstime using Easy JTAG but dont know step by step... here what already i did
to Samsung S5570

1. solder cable to pcb
2. connect phone to jtag port

but when i pres repair it show message done with error. what i messed up? did i need to connect power to phone using PS (power amplifier) or just connect usb to boot?

what is RESET pin at PCB?

Please help
Attached Images
File Type: jpg S5570.JPG (121.5 KB, 147 views)

Last edited by viewprofile; 10-27-2014 at 03:13.
  Reply With Quote
Old 10-27-2014, 03:22   #23 (permalink)
Freak Poster
 
viewprofile's Avatar
 
Join Date: Jul 2012
Posts: 391
Member: 1784151
Status: Offline
Sonork: 0
Thanks Meter: 53
Quote:
Originally Posted by viewprofile View Post
This is my firstime using Easy JTAG but dont know step by step... here what already i did
to Samsung S5570

1. solder cable to pcb
2. connect phone to jtag port

but when i pres repair it show message done with error. what i messed up? did i need to connect power to phone using PS (power amplifier) or just connect usb to boot?

what is RESET pin at PCB?

Please help
After i connect USB dan battery to phone
Code:
For support and updates visit http://easy-jtag.com
Check security...OK
Initialising: SAMSUNG GT-S5570 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 0FFFCxxxxxxxxxxxxx ,FW Ver.: 01.50
Connecting to Target...
JTAG device: MSM7227 
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Target not halted ;-(
  Reply With Quote
Old 11-29-2014, 07:03   #24 (permalink)
Freak Poster
 
Join Date: Mar 2010
Posts: 185
Member: 1260168
Status: Offline
Thanks Meter: 46
Hello sir iam facing problem whenever i tryied to flash zte s183 always giving error riff shows 8mb flash file but can't flash blinking mobile & z3x jtag shows 16mb & gives error
log is here

EasyJtag Suite ver.: 1.6.3.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: ZTE S168 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: XXXXXXXXXXXXX ,FW Ver.: 01.50
Connecting to Target...
JTAG device: QSC1110
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting NOR memory parameters of bank (0) ...
NOR FlashID:0001:007E 'S29NS128J 16MB (Spansion)' found
Writing memory from file...G:\EASY Jtag\Files\ZTE\S183\ZTE_S183_dump_rom1_16mb.bin
embeddedice handshake timeout
Timeout Error while reading approx : 0x00000100 bytes over DCC
Unknown DCC answer /PROTOCOL/
dcc_fastnor_write_pages error (PACKET_ADRESS:00010000,PACKET_LENGTH:00008000,MAX _DCC_BUFFER_LENGTH:00010c00,f:00) happened...
Failed writing file G:/EASY Jtag/Files/ZTE/S183/ZTE_S183_dump_rom1_16mb.bin to NOR flash 0 at offset 0x00010000
  Reply With Quote
Old 11-29-2014, 07:26   #25 (permalink)
Freak Poster
 
Join Date: Mar 2010
Posts: 185
Member: 1260168
Status: Offline
Thanks Meter: 46
Problem solved MTS zte s183 8mb flashed sucessfully with Easy Jtag
here is log

Check security...OK
Initialising: Generic QSC1100 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: XXXXXXXXXXXXXXXXXXXX ,FW Ver.: 01.50
Connecting to Target...
JTAG device: QSC1100
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting NOR memory parameters of bank (0) ...
NOR FlashID:0001:007E 'S29NS128J 16MB (Spansion)' found
Checking NAND Image : D:\RIFF BOX\RIFF BOX\FLASH FILE\ZTE\S183 C132\ZTE S183_B03_May16 2013.bin
File successefuly loaded!
Writing memory from file...D:\RIFF BOX\RIFF BOX\FLASH FILE\ZTE\S183 C132\ZTE S183_B03_May16 2013.bin
NOR Write OK! Elpsed time: 704.703125s (11.625 KiB/s)
  Reply With Quote
Old 05-19-2015, 12:29   #26 (permalink)
Insane Poster
 
Join Date: Aug 2009
Location: jaipur (rajasthan)
Age: 45
Posts: 82
Member: 1095731
Status: Offline
Sonork: nts21713
Thanks Meter: 2
zte s183 not connected with z3x jtag ,
target not halted problem


Initialising: ZTE S168 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: 14005009B43886A3 ,FW Ver.: 01.52
Connecting to Target...
JTAG device: QSC1110
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Target not halted ;-(
  Reply With Quote
Old 09-24-2015, 19:48   #27 (permalink)
Junior Member
 
Join Date: Sep 2015
Posts: 1
Member: 2463648
Status: Offline
Thanks Meter: 0
Spd Service Tool V1.0.0.1646
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 13:25.



Powered by Searchlight © 2017 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2015 -
Page generated in 0.37104 seconds with 8 queries

SEO by vBSEO