Which file to use GT-N8010 - GSM-Forum

Jane1 · 01-11-2019, 15:35

I would like to program eMMC for GT-N8010, but I did not find a dump.
May I use a file for GT-N8000?

From Z3X shell ( in support files section)I found GT-N8000 dirctory and there a subdirectory named Dump
So I think I should use one of the files. But which one?
There is N8000_dump_full_N8000XXUDPB1.bin of 1.02GB
and N8000_dump_full_N8000XXUDPB1.bin of only about 18MB
I checked them and ROM2 and ROM1 are different in each file.
What file should I use?What is a difference in?

Can I flash only ROM2( boot1) and after the device is unbricked, flash firmware via ODIN?
Thanks for the explanation

Jane1 · 01-12-2019, 22:39

Nobody knows which file??Thanks

JefMaximo · 01-13-2019, 00:27

I would like to know too.

layder · 01-14-2019, 19:04

You may write 4-files Samsung firmware by vendor to eMMC.

Also you need find good EFS file, if you have probles with restore system settings (IMEI, SN, etc.)

Jane1 · 01-14-2019, 21:28

@layder: Thanks for your reply. Which 4 files do you mean?
I understand I must flash( via Easy Jtag ) ROM2( that is bootloader).
But which all other files do you mean?
Must I also FIRST write ( via Easy Jtag ) any file to user area otherwise I am not able to use ODIN to flash?

layder · 01-14-2019, 23:01

Quote:

Originally Posted by Jane1

@layder: Thanks for your reply. Which 4 files do you mean?
I understand I must flash( via Easy Jtag ) ROM2( that is bootloader).
But which all other files do you mean?
Must I also FIRST write ( via Easy Jtag ) any file to user area otherwise I am not able to use ODIN to flash?

you can flash 4 files Samsung firmware like this:

Çàïèñü ïî âåíäîðó: Samsung

Jane1 · 01-15-2019, 07:32

@layder Thanks a lot. Video there is the best :-) for the explanation.

Jane1 · 01-15-2019, 07:46

Two more questions:
I need to write via Easy Jtag ONLY Boot loader file.( BL file) The rest can be loaded via ODIN later?

If I need to replace old eMMC with the new eMMC i need not a dump but standard flash files that are used with ODIN?

Thanks for your explanation

layder · 01-21-2019, 18:24

Quote:

Originally Posted by Jane1

Two more questions:
I need to write via Easy Jtag ONLY Boot loader file.( BL file) The rest can be loaded via ODIN later?

If I need to replace old eMMC with the new eMMC i need not a dump but standard flash files that are used with ODIN?

Thanks for your explanation

If you write only BL files, you need to flash all from download mode

01-11-2019, 15:35	#1 (permalink)
Jane1 No Life Poster Join Date: Jan 2010 Posts: 755 Member: 1212133 Status: Offline Thanks Meter: 58	Which file to use GT-N8010 I would like to program eMMC for GT-N8010, but I did not find a dump. May I use a file for GT-N8000? From Z3X shell ( in support files section)I found GT-N8000 dirctory and there a subdirectory named Dump So I think I should use one of the files. But which one? There is N8000_dump_full_N8000XXUDPB1.bin of 1.02GB and N8000_dump_full_N8000XXUDPB1.bin of only about 18MB I checked them and ROM2 and ROM1 are different in each file. What file should I use?What is a difference in? Can I flash only ROM2( boot1) and after the device is unbricked, flash firmware via ODIN? Thanks for the explanation

01-12-2019, 22:39	#2 (permalink)
Jane1 No Life Poster Join Date: Jan 2010 Posts: 755 Member: 1212133 Status: Offline Thanks Meter: 58	Nobody knows which file??Thanks

01-13-2019, 00:27	#3 (permalink)
JefMaximo Insane Poster Join Date: Oct 2017 Posts: 86 Member: 2772222 Status: Offline Thanks Meter: 9	I would like to know too.

01-14-2019, 19:04	#4 (permalink)
layder Product Supporter Join Date: Jun 2002 Location: Belarus Age: 47 Posts: 3,188 Member: 13148 Status: Offline Thanks Meter: 2,948	You may write 4-files Samsung firmware by vendor to eMMC. Also you need find good EFS file, if you have probles with restore system settings (IMEI, SN, etc.)

01-14-2019, 21:28	#5 (permalink)
Jane1 No Life Poster Join Date: Jan 2010 Posts: 755 Member: 1212133 Status: Offline Thanks Meter: 58	@layder: Thanks for your reply. Which 4 files do you mean? I understand I must flash( via Easy Jtag ) ROM2( that is bootloader). But which all other files do you mean? Must I also FIRST write ( via Easy Jtag ) any file to user area otherwise I am not able to use ODIN to flash?

01-15-2019, 07:32	#7 (permalink)
Jane1 No Life Poster Join Date: Jan 2010 Posts: 755 Member: 1212133 Status: Offline Thanks Meter: 58	@layder Thanks a lot. Video there is the best :-) for the explanation.

01-15-2019, 07:46	#8 (permalink)
Jane1 No Life Poster Join Date: Jan 2010 Posts: 755 Member: 1212133 Status: Offline Thanks Meter: 58	Two more questions: I need to write via Easy Jtag ONLY Boot loader file.( BL file) The rest can be loaded via ODIN later? If I need to replace old eMMC with the new eMMC i need not a dump but standard flash files that are used with ODIN? Thanks for your explanation