first try for dump emmc with ram for N915 need help - GSM-Forum

project-luminol · 09-10-2019, 21:01

this chip is kmr210008m all pinouts look fine , there is any special settings for those combined chip ?

this is the log

eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
Microsoft Windows 10 (64 bit) build 18362 (10.0.18362.1)

Looking for EasyJTAG box...
EasyJTAG API ver. 3307

EasyJTAG Box Firmware = 2.44

Changelog:

30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 1799 mV
CMD Active Level: 1854 mV
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 2731 mV
CMD Active Level: 2792 mV
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 3110 mV
CMD Active Level: 3277 mV
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 1 MHz
CMD Pullup Level: 3111 mV
CMD Active Level: 3277 mV
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]

layder · 09-10-2019, 21:36

Quote:

Originally Posted by project-luminol

this chip is kmr210008m all pinouts look fine , there is any special settings for those combined chip ?

N915 have BGA529 eMMC and no have ISP
N910 have BGA280 eMMC, and no have ISP

N915 eMMC can connect via eMMC soket (but eMMC soket have mistake - VCC and VCCQ mixed up)

eMMC from N910/G850 can connect via wires

Ðåøåíî BGA280 eMMC Pinout (KMR2W0009M-A803))

project-luminol · 09-12-2019, 23:15

so there is no way to dump this chip with easy box ?
or just cant dump with wires and just with socket ?

Thank you very much !

akash48 · 09-13-2019, 05:11

project-luminol

hy bro please give the N915 isp pinout

project-luminol · 09-15-2019, 19:37

[IMG]https://2.bp.blogspo*.com/-deJsqVgDUu4/WQ70NdmOqhI/AAAAAAAABSA/fbF52Jksfk01Cgb3mk_QZkNcrTWoxSUaACLcB/s320/17458422_812025118954934_6297695817820655844_n.jpg[/IMG]

09-10-2019, 21:01	#1 (permalink)
project-luminol Freak Poster Join Date: May 2011 Posts: 297 Member: 1580345 Status: Offline Sonork: 555444333 Thanks Meter: 28	first try for dump emmc with ram for N915 need help this chip is kmr210008m all pinouts look fine , there is any special settings for those combined chip ? this is the log eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019) Microsoft Windows 10 (64 bit) build 18362 (10.0.18362.1) Looking for EasyJTAG box... EasyJTAG API ver. 3307 EasyJTAG Box Firmware = 2.44 Changelog: 30.06.2019 (ver 1.6.1.0) Fix: Bugs that have been found through your crash report Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting frequence to 36 MHz CMD Pullup Level: 1799 mV CMD Active Level: 1854 mV Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD] Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting frequence to 36 MHz CMD Pullup Level: 2731 mV CMD Active Level: 2792 mV Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD] Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting frequence to 36 MHz CMD Pullup Level: 3110 mV CMD Active Level: 3277 mV Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD] Setting interface to EasyJtag2/ISP Setting bus width to 1 Bit Setting frequence to 1 MHz CMD Pullup Level: 3111 mV CMD Active Level: 3277 mV Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD] Last edited by project-luminol; 09-10-2019 at 21:08.

09-13-2019, 05:11	#4 (permalink)
akash48 Freak Poster Join Date: Jun 2011 Location: jahanian punjab pakistan Posts: 153 Member: 1588653 Status: Online Sonork: imran_Gill Thanks Meter: 83	N915 project-luminol hy bro please give the N915 isp pinout

09-15-2019, 19:37	#5 (permalink)
project-luminol Freak Poster Join Date: May 2011 Posts: 297 Member: 1580345 Status: Offline Sonork: 555444333 Thanks Meter: 28	its for n910 but same chip [IMG]https://2.bp.blogspo*.com/-deJsqVgDUu4/WQ70NdmOqhI/AAAAAAAABSA/fbF52Jksfk01Cgb3mk_QZkNcrTWoxSUaACLcB/s320/17458422_812025118954934_6297695817820655844_n.jpg[/IMG]

09-12-2019, 23:15	#3 (permalink)
project-luminol Freak Poster Join Date: May 2011 Posts: 297 Member: 1580345 Status: Offline Sonork: 555444333 Thanks Meter: 28	so there is no way to dump this chip with easy box ? or just cant dump with wires and just with socket ? Thank you very much !