GSM Shop  
GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 08-01-2018, 19:12   #16 (permalink)
No Life Poster
 
farukpdm's Avatar
 
Join Date: Oct 2010
Location: DHAKA Mobile
Posts: 1,181
Member: 1417131
Status: Offline
Sonork: 100.1625249
Thanks Meter: 741

Where preloder on this bl
Need preloder because its mtk bass Phone
Or one more thing,
Flash all time without preloder on this model
Will not dead
Quote:
Originally Posted by techtogsm View Post
Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0001D1FFBE00
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 429.79 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 90.26 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 639.62 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 658.59 KB/s

Check BOOT_PARTITION_EN for the selected vendor

All done time: [00:00:09:614]
Sent from my Redmi 4X using Tapatalk
  Reply With Quote
The Following User Says Thank You to farukpdm For This Useful Post:
Old 08-01-2018, 19:27   #17 (permalink)
No Life Poster
 
farukpdm's Avatar
 
Join Date: Oct 2010
Location: DHAKA Mobile
Posts: 1,181
Member: 1417131
Status: Offline
Sonork: 100.1625249
Thanks Meter: 741
Pm me
I have solution
Quote:
Originally Posted by yvssiva View Post
i need to repair g532f dead boot but this error comes im new to easy jtag what is the problem please help me

Sent from my Redmi 4X using Tapatalk
  Reply With Quote
The Following User Says Thank You to farukpdm For This Useful Post:
Old 08-02-2018, 10:06   #18 (permalink)
Freak Poster
 
Join Date: May 2008
Posts: 264
Member: 775567
Status: Offline
Sonork: tybsky
Thanks Meter: 46
Setting frequence to 14 Mhz
CMD Pullup Level: 2217 mV
CMD Active Level: 2444 mV
EMMC Device Information :
EMMC CID: 90014A483847347592011196604DA4E6
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 1196604D , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 10/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_1196604D_20180802_015905.extcsd
EMMC Init completed.

Setting frequence to 14 Mhz
CMD Pullup Level: 2423 mV
CMD Active Level: 2598 mV
EMMC Device Information :
EMMC CID: 90014A483847347592011196604DA4E6
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 1196604D , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 10/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_1196604D_20180802_015911.extcsd
EMMC Init completed.

Opening file: H8G4u_samsung.pit

Pit: H8G4u_samsung.pit
Entry count: 31

The size of the last section has been updated

Setting frequence to 14 Mhz
CMD Pullup Level: 2423 mV
CMD Active Level: 2588 mV
EMMC Device Information :
EMMC CID: 90014A483847347592011196604DA4E6
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 1196604D , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 10/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_1196604D_20180802_015917.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0001D1FFBE00
Writing PIT at address: 000000004400
GPT-partitioning done

Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 2097152 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 598.84 KB/s
Partition name: EFUSE
Filename: efuse.bin , Offset: 000001B80000 , filesize: 524288 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 683.98 KB/s
Partition name: TEE1
Filename: tee1.bin , Offset: 000001C00000 , filesize: 6291456 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 752.23 KB/s
Partition name: PARAM
Filename: PARAM.bin , Offset: 000005000000 , filesize: 8388608 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 738.05 KB/s

Writing BootConfig ...
Reg: 179 Value: 0x48
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
Done

All done time: [00:00:30:916]

Setting frequence to 14 Mhz
CMD Pullup Level: 2402 mV
CMD Active Level: 2578 mV
EMMC Device Information :
EMMC CID: 90014A483847347592011196604DA4E6
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 1196604D , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 10/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_1196604D_20180802_020422.extcsd
EMMC Init completed.
but still dead
  Reply With Quote
Old 08-02-2018, 10:17   #19 (permalink)
No Life Poster
 
pintu_das's Avatar
 
Join Date: Jan 2015
Location: Narsingdi, Dhaka, Bangladesh
Age: 22
Posts: 1,013
Member: 2325851
Status: Offline
Sonork: 100.1680491
Thanks Meter: 978
Donate money to this user
a lot of problems with the bl file


100%% tested


Here the file

Last edited by pintu_das; 08-02-2018 at 10:26.
  Reply With Quote
The Following 2 Users Say Thank You to pintu_das For This Useful Post:
Old 08-02-2018, 10:22   #20 (permalink)
Junior Member
 
Join Date: Apr 2014
Posts: 20
Member: 2170126
Status: Offline
Sonork: Whtas & Fb
Thanks Meter: 12
Donate money to this user
use this File

https://mega.nz/#!BtwQUYqR!YLT3CBCF0...nwtx34u3MbDDLU

press thanks Buttun
  Reply With Quote
The Following User Says Thank You to rajeshda69 For This Useful Post:
Old 08-02-2018, 16:36   #21 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 41
Posts: 234
Member: 13148
Status: Online
Thanks Meter: 112
http://forum.gsmhosting.com/vbb/f672...ixing-2444381/

use 1.5.0 to write BL, or use bin files from support (z3x shell)
  Reply With Quote
The Following User Says Thank You to layder For This Useful Post:
Old 08-02-2018, 17:11   #22 (permalink)
Freak Poster
 
Join Date: Aug 2015
Location: KATHMANDU,NEPAL
Posts: 483
Member: 2438408
Status: Offline
Thanks Meter: 362
SM-G532f after flash dead. How to repair

samsung g532f after flash dead write pit and bl latest but phone still dead

see pic

https://ibb.co/jgGadz
  Reply With Quote
Old 08-02-2018, 17:12   #23 (permalink)
Freak Poster
 
Join Date: Aug 2015
Location: KATHMANDU,NEPAL
Posts: 483
Member: 2438408
Status: Offline
Thanks Meter: 362
Quote:
Originally Posted by Yashbanswara View Post
Try This:

samsung G532F Boot repair done but still dead

After Write Please Give Report Here ( With LOG & Screen Shot )

If Problem Not Solve I Will Give Other Solution

Thanks & Regards By:
All TECH 4 You
samsung g532f after flash dead write pit and bl latest but phone still dead

see pic

https://ibb.co/jgGadz
  Reply With Quote
The Following User Says Thank You to alexid For This Useful Post:
Old 08-02-2018, 18:22   #24 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 41
Posts: 234
Member: 13148
Status: Online
Thanks Meter: 112
Quote:
Originally Posted by alexid View Post
samsung g532f after flash dead write pit and bl latest but phone still dead

see pic

https://ibb.co/jgGadz
At you log can't write preloader to rom2
It fixed at 1.5.2, use bin files from support (G532F_dump_G532FXXU1AQG2.bin.zip) or wait 1.5.2
  Reply With Quote
Old 08-03-2018, 09:06   #25 (permalink)
No Life Poster
 
meeza_84's Avatar
 
Join Date: May 2006
Location: Gojra
Posts: 2,219
Member: 279362
Status: Offline
Sonork: 100.1594141
Thanks Meter: 410
Quote:
Originally Posted by yvssiva View Post
i need to repair g532f dead boot but this error comes im new to easy jtag what is the problem please help me

bro use latest bl file
  Reply With Quote
Old 08-03-2018, 17:14   #26 (permalink)
Product Manager
 
blang's Avatar
 
Join Date: Oct 2000
Location: future
Posts: 20,393
Member: 2368
Status: Offline
Sonork: 100.111111
Thanks Meter: 174,910
Quote:
Originally Posted by alexid View Post
samsung g532f after flash dead write pit and bl latest but phone still dead

see pic

https://ibb.co/jgGadz
what firmware version was in phone before and what version you write in to phone?
  Reply With Quote
Old 08-04-2018, 11:05   #27 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 41
Posts: 234
Member: 13148
Status: Online
Thanks Meter: 112
Quote:
Originally Posted by alexid View Post
samsung g532f after flash dead write pit and bl latest but phone still dead
eMMC Tool Shuite: Log of changes, khown bugs and info about fixing it

Use 1.5.0 version, or wait some days to 1.5.2, or flash binary files to ROM2
  Reply With Quote
Old 08-05-2018, 11:18   #28 (permalink)
Freak Poster
 
Join Date: Aug 2015
Location: KATHMANDU,NEPAL
Posts: 483
Member: 2438408
Status: Offline
Thanks Meter: 362
Quote:
Originally Posted by blang View Post
what firmware version was in phone before and what version you write in to phone?
i dont no other shop flash and dead first phone problem in frp
  Reply With Quote
Old 08-05-2018, 19:31   #29 (permalink)
Major Poster
 
Join Date: Aug 2006
Posts: 45
Member: 340271
Status: Offline
Thanks Meter: 3
hello i have the same prolem g532f anyone have solution plz help

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0001D1FFBE00
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 339,65 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 30,49 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 509,23 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 505,90 KB/s

Check BOOT_PARTITION_EN for the selected vendor

All done time: [00:00:24:320]
  Reply With Quote
Old 08-05-2018, 19:59   #30 (permalink)
Moderator
 
...:::::NP™:::::...'s Avatar
 
Join Date: Nov 2009
Location: BD ⇌ ZA
Age: 36
Posts: 9,527
Member: 1162626
Status: Online
Sonork: 100.1591727 QQ:2337938173
Thanks Meter: 9,105
@ All forum members

Those who have had dead boot problems, just download this firmware G532FXWU1AQB5_G532FXFV1AQC1_XFV_6.0.1

Write the [BL File] ''BL_G532FXWU1AQB5_CL10802954_QB12732196_REV00_use r_low_ship_MULTI_CERT'' file with JTAG box, hopefully you will be get your phone again download mode.

Some phones was dead by the latest version firmware but my recommended firmware was revitalized.
__________________
Use Search Button to get Instant Result | Follow Forum Rules
Avoid Spams in the forum to prevent ban your account.


Br,
Palash Ahammad
  Reply With Quote
The Following 2 Users Say Thank You to ...:::::NP™:::::... For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 12:10.



Powered by Searchlight © 2018 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.22994 seconds with 7 queries

SEO by vBSEO