g610f/dd frp via emmc isp connection

[Bhagat20]

please suggest if i can unlock samsung g610f frp via easy jatag plus emmc isp connection and how?

[Bhagat20]

Please someone help, phone is frp locked, only showing custom binary blocked by frp, can frp be unlocked by easy jtag plus?

[UzjavaAzizbek]

Originally Posted by Bhagat20

Please someone help, phone is frp locked, only showing custom binary blocked by frp, can frp be unlocked by easy jtag plus?

Flash ofitsall samsung firmare with home.csc and data will be saved

[Bhagat20]

Originally Posted by UzjavaAzizbek

Flash ofitsall samsung firmare with home.csc and data will be saved

Flashed many firmware from many different countries also but still only rebooting on custom binary blocked by frp.

[Bhagat20]

Easy jtag team please help, I was unable to connect g610f with easy jtag... Cmd crc error, maybe problem with soldering, so I decided to desolder isp connections, and connected display to it, but phone not getting on, completely dead, when connecting to PC detecting as exonys 7088.... Please suggest what's wrong?

[duythangvn]

Originally Posted by Bhagat20

Easy jtag team please help, I was unable to connect g610f with easy jtag... Cmd crc error, maybe problem with soldering, so I decided to desolder isp connections, and connected display to it, but phone not getting on, completely dead, when connecting to PC detecting as exonys 7088.... Please suggest what's wrong?

change pullup cmd resistor and clk resistor

[Bhagat20]

Originally Posted by duythangvn

change pullup cmd resistor and clk resistor

sir but now after desoldering all pinouts phone not getting on, completely dead, before phone was just frp locked, i removed pinout also carefully, what is the problem?

[duythangvn]

Originally Posted by Bhagat20

sir but now after desoldering all pinouts phone not getting on, completely dead, before phone was just frp locked, i removed pinout also carefully, what is the problem?

do you used hot air to remove metal shield? before solder wire is phone turn on normally ??
often phone dead after solder isp only change those 2 resistor (not resoldering them) after phone will turn on nomally.

[Bhagat20]

Originally Posted by duythangvn

do you used hot air to remove metal shield? before solder wire is phone turn on normally ??
often phone dead after solder isp only change those 2 resistor (not resoldering them) after phone will turn on nomally.

no sir didn't understand what to do for phone to get back alive? should i change cmd and clk ic on pcb, but where i'll get those ic?

[duythangvn]

Originally Posted by Bhagat20

no sir didn't understand what to do for phone to get back alive? should i change cmd and clk ic on pcb, but where i'll get those ic?

with hight temp iron solder r5005,5007 often broken when solder it.
try to change it.

[Bhagat20]

Originally Posted by duythangvn

with hight temp iron solder r5005,5007 often broken when solder it.
try to change it.

but from where ill get another ic(r5005,5007)

[Bhagat20]

Please suggest from where I can get cmd and clk ic? Can I desoldered it from any phones dead board or same model phone's board and solder it on this board?

[Bhagat20]

Layder sir, please provide some help on this matter?

[layder]

most likely you have damaged resistors when soldering ISP wires.

I use some time ISP connection succesfully

[Bhagat20]

Originally Posted by layder

most likely you have damaged resistors when soldering ISP wires.

I use some time ISP connection succesfully

Sir you mean cmd and clk? Now how to bring the phone back to life? And how to replace the resistors(cmd and clk) can I desolder it from any phone and solder it to g610f or only from another g610f?