Error After Fix Dead Boot in G532G
 

hello to all users that can help I have 4psc of Samsung J2 Prime that Dead after Flash I fix this Dead boot with A EasyJtag now the phone turn on but in the recovery I gut allot of error 2 device I manage to fix not ask me how it's just work now the 2 device that as left to fix have the same error but they not want to fix if somebody have a solution for my problem please help me


here is the error in picture


https://imgur.com/a/gSO4n

team please help our brother how to solve his problem...i encounter that issue before but its R.T.O

Flash This Firmware Will Be Solove-----SM-G532G_1_20170531181753_3t9qeznpo3_fac

you can give me a link to this firmware

I try to find the name that you give me I not find in google nothing

Thanks all done with this file

1st try to reset efs... when problem not solve then

2nd try to download official firmware via kies for ur device

then flash again & see problem solve or not...


when not solve then please tell me,
I will give you next & final solution for this problem...

I secssed to fix another j2 but now i have the last one i have this only 2 error in recovery

E:Faild to mount /efs (Invalid argument)
E:Faild to mount /efs (Invalid argument)
dm-verity verification faild

For red errors you need to flash phone with 4parts firmware along pit file

how to reset the efs i try same Methods not work

OK, Now You Try This :

Reset efs of this model not available right now (I'm Sorry)...

So, Now Final & Last Solution :

1. Backup 1GB user area & rom 2

2. Factory Reset+Format eMMC Chip,

3. Repair EXT_CSD full from Backup,

4. Right only currect PIT file with tick Repartition From write by Vendor Tab ,

5. Write Other Tested 1 GB User area file & rom 1

6. Now check when download mode come then Flash with Samsung Official Firmware,

And see After flash Problem Solve or not.....

(I Request to you please try it, your problem 100% solve)

The problem that when I solder the wire and connect to the EasyJtag every 30/40 sec the phone disconnect and after 15 seconds its connect again and show in the device manger and so I can't do prosses that take a long time because its turn off and its give me error that its fail because have too many error