GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag


Reply
 
LinkBack Thread Tools Display Modes
Old 11-09-2019, 10:51   #436 (permalink)
No Life Poster
 
eivelice's Avatar
 
Join Date: Nov 2006
Location: philippines
Age: 37
Posts: 949
Member: 388962
Status: Offline
Sonork: 100.1637202
Thanks Meter: 249
Donate money to this user

type of connection is via moorc adapter 5 in 1

box type is i really don't know, i bought this box in 2017.. its an old one not yet easy jtag plus but i updated it to plus.

Quote:
EasyJtag Suite Classic ver.: 3.6.1.15 / wxWidgets 3.1.2-W-U started.
OS ver.: Windows 7 (build 7601, Service Pack 1). Admin rights OK
Android Explorer ver:1.0.0.13
Autorun Agent ver:1.0.0.0
Crash Reporting ver:1.4.0.3
eMMC Odin ver:1.0.0.6
QUALCOMM Direct ver:1.0.6936.8894
Android ADB API ver:2.0.0.0
FTDI API ver:3.2.4.0
LibUSB API ver:1.2.6.0
Visual C++ Runtime ver:10.0.30319.1
Setting box Pinout ...

Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA69-xxxx , ver: 22
Z3X Card Activation [JTAGPLUS] : NOT ACTIVATED
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED
i tried this now : universal format

and i have resoldered all wires

Quote:
Running:eMMC: Factory Format
Z3X EasyJtag Software ver. 3.6.1.15
Skip loading eMMC Addon Firmware
CMD Pullup Level:2928 mV
CMD Active Level:3217 mV
Box IO Level:3300 mV
CLK Rate:14000 kHz
Formatting eMMC card, please wait up to 3 min...
Setting Service Mode...
eMMC Format Done.

Done.
and then i try to write all roms again using the 2 file from support with only charger in phone. with 3.3v and 21 mhz clk

and this is logs :

Quote:
Done.
Checking NAND Image : C:\emmc file repair jtag\g532g\SAMSUNG_SM-G532G_emmc_dump_ROM1_ROM2_200MB\Samsung_SM-G532G_emmc_dump_ROM1.bin
Autodetected RAW data
Partition info successfully found
Linux partitions is not found in image...
File successefuly loaded!

Found ROM2 and automatically selected.
extCSD Are not selected , skip writing extCSD
Processing file...C:\emmc file repair jtag\g532g\SAMSUNG_SM-G532G_emmc_dump_ROM1_ROM2_200MB\Samsung_SM-G532G_emmc_dump_ROM1.bin
Processing file...C:\emmc file repair jtag\g532g\SAMSUNG_SM-G532G_emmc_dump_ROM1_ROM2_200MB\Samsung_SM-G532G_emmc_dump_ROM2.bin
ROM3 Are not selected , skip writing ROM3
Z3X EasyJtag Software ver. 3.6.1.15
Skip loading eMMC Addon Firmware
CMD Pullup Level:2928 mV
CMD Active Level:3217 mV
Input file : C:\emmc file repair jtag\g532g\SAMSUNG_SM-G532G_emmc_dump_ROM1_ROM2_200MB\Samsung_SM-G532G_emmc_dump_ROM1.bin
Writing 000AC00000 bytes to 0000000000... ROM1 (USER ROM)
Error writing address 0x03000000 Error Code:-1 Reason :CMD Timeout Error
Retry writing address 0x0003000000 (Attempt #1)...
Retry Success!
Error writing address 0x06800000 Error Code:-1 Reason :CMD Timeout Error
Retry writing address 0x0006800000 (Attempt #1)...
Retry Success!
Done, time taken: 123 sec. Average Write Speed: 1464 kB/s

Z3X EasyJtag Software ver. 3.6.1.15
Skip loading eMMC Addon Firmware
CMD Pullup Level:2928 mV
CMD Active Level:3217 mV
Input file : C:\emmc file repair jtag\g532g\SAMSUNG_SM-G532G_emmc_dump_ROM1_ROM2_200MB\Samsung_SM-G532G_emmc_dump_ROM2.bin
Writing 0000200000 bytes to 0000000000 ...ROM2 (BOOT1 ROM)
Done, time taken: 2 sec. Average Write Speed: 703 kB/s
but when i detect the phone again after writing rom, this is the logs :

there is an error see logs :

Quote:
Z3X EasyJtag Software ver. 3.6.1.15
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 12FF9016CE5F1172, ,FW Ver.: 01.63
CMD Pullup Level:2939 mV
CMD Active Level:3238 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 90014A483847347592010B5A3088A40C
eMMC CSD : D02701320F5903FFFFFFFFE78A40002A
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 10/2017 Rev.0x1
eMMC NAME: H8G4u , S/N: 190460040
eMMC NAME (HEX): 483847347520
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 0 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00002000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H8G4u_ 190460040_20191109_1755.extcsd
Caution: invalid backup GPT header, but valid main header!
Warning! Main and backup partition tables differ!
Warning! One or more CRCs don't match. You should repair the disk!
Caution: Found protective or hybrid MBR and corrupt GPT.
Real (Hardware) Disk/Image size: E90000 sectors 7.3 GiB
Soft (Partitioned) Disk/Image size: E8FFBC sectors 7.3 GiB
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,15269854
Partition info successfully found
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x000C000000 (3.7GB)
Unable to mount SYSTEM , code : 95
---------------------------------------------
Detected USERDATA USERDATA : 0x00E9400000 (3.632GB)
Unable to mount USERDATA , code : 95
Done.
then i go to easy jtag plus for write by vendor and this is logs:

Quote:
eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 3307
EasyJTAG Box Serial = 12FF9016CE5F1172
Card Serial = AA699FF3
EasyJTAG Box Firmware = 1.63

Changelog:

30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report

HiPower mode is ON
Setting frequence to 21 MHz
CMD Pullup Level: 2939 mV
CMD Active Level: 3227 mV
EMMC Device Information :
EMMC CID: 90014A483847347592010B5A3088A40C
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 0B5A3088 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 10/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_0B5A3088_20191109_175746.extcsd
EMMC Init completed.

Opening file: GRANDPPLTE_CIS_SER.pit

Pit: GRANDPPLTE_CIS_SER.pit
Entry count: 34

The size of the last section has been updated

BL_G532GDXU1AQI2_CL12327063_QB15069235_REV00_user_ low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

HiPower mode is ON
Setting frequence to 21 MHz
CMD Pullup Level: 2939 mV
CMD Active Level: 3238 mV
EMMC Device Information :
EMMC CID: 90014A483847347592010B5A3088A40C
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 0B5A3088 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 10/2017
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_0B5A3088_20191109_175758.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0001D1FFBE00
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 330.89 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 490.43 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 56.12 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 836.97 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 863.14 KB/s

Partition CACHE : formatting as EXT4. Please wait ...
Formatting completed
Partition HIDDEN : formatting as EXT4. Please wait ...
Formatting completed

Check BootConfig for the selected vendor

All done time: [00:00:31:611]
but phone still dead.

what do i need to do next please?

thank you

ALSO, when i try to do hw partition to write to extCSD

this is error :

Quote:
Running:JEDEC: Partitions config burn...
Z3X EasyJtag Software ver. 3.6.1.15
Skip loading eMMC Addon Firmware
CMD Pullup Level:2939 mV
CMD Active Level:3238 mV
Box IO Level:3300 mV
CLK Rate:14000 kHz
GP Multiplier: 400000, 4096 Kb, 4Mb
Partition configuration:
No enhanced user data area
User partition write reliability: off
No GP1 partition
GP1 write reliability: on
No GP2 partition
GP2 write reliability: on
No GP3 partition
GP3 write reliability: on
No GP4 partition
GP4 write reliability: on
All GP Partitions are 0 set size of at least one GP Partition
HW Parts Config Fail.

Last edited by layder; 11-09-2019 at 11:39. Reason: merge posts
  Reply With Quote
Old 11-09-2019, 11:38   #437 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 43
Posts: 1,648
Member: 13148
Status: Offline
Thanks Meter: 1,446
FW Ver.: 01.63 - old box, 1st generation

you can set lover freq (14Mhz) if you get errors, and use 2,8 IO
also you can add 2 resistors to adapter ~200 Ohm from CMD and D0 to IO (1,8 line) as at pinouts pictures

When you restore boot via BL files and Plus Software, you need De-select Repartition (it needed when eMMC change)

Now after repair boot you need write only GPT from ane worked dump from same device (write by vendor - from file - select only GPT)
  Reply With Quote
The Following User Says Thank You to layder For This Useful Post:
Old 12-02-2019, 16:36   #438 (permalink)
No Life Poster
 
kamraankisskiss's Avatar
 
Join Date: Mar 2010
Location: pakistan jhelum
Posts: 905
Member: 1261180
Status: Online
Sonork: 100.1590645
Thanks Meter: 86
write latest bl but sill dead

12/2/2019 8:02:51 PM>
12/2/2019 8:02:51 PM> eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
12/2/2019 8:02:54 PM> Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.18015)
12/2/2019 8:02:54 PM>
12/2/2019 8:02:54 PM> Looking for EasyJTAG box...
12/2/2019 8:02:54 PM> EasyJTAG API ver. 3307
12/2/2019 8:02:57 PM> OpenUSB returned = 0
12/2/2019 8:02:58 PM> EasyJTAG Box Serial = 0B011006F8DECFFA
12/2/2019 8:03:00 PM> Card Serial = AA41406B
12/2/2019 8:03:00 PM> EasyJTAG Box Firmware = 1.63
12/2/2019 8:03:00 PM>
12/2/2019 8:03:14 PM> Looking for EasyJTAG box...
12/2/2019 8:03:14 PM> EasyJTAG API ver. 3307
12/2/2019 8:03:14 PM> Setting IO Levels to 3.3V
12/2/2019 8:03:14 PM> Setting frequence to 21 MHz
12/2/2019 8:03:15 PM> EasyJTAG Box Serial = 0B011006F8DECFFA
12/2/2019 8:03:15 PM> EasyJTAG Box Firmware = 1.63
12/2/2019 8:03:18 PM> HiPower mode is ON
12/2/2019 8:03:18 PM> Setting frequence to 21 MHz
12/2/2019 8:03:18 PM> CMD Pullup Level: 2062 mV
12/2/2019 8:03:18 PM> CMD Active Level: 2959 mV
12/2/2019 8:03:19 PM> eMMC Init returned = 0
12/2/2019 8:03:19 PM> EMMC Device Information :
12/2/2019 8:03:19 PM> EMMC CID: 90014A48384734759201195728561534
12/2/2019 8:03:19 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
12/2/2019 8:03:19 PM> EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 19572856 , rev. 0x01
12/2/2019 8:03:19 PM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 1/2018
12/2/2019 8:03:19 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
12/2/2019 8:03:19 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
12/2/2019 8:03:19 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
12/2/2019 8:03:19 PM> EMMC Permanent Write Protection: No
12/2/2019 8:03:19 PM> EMMC Temporary Write Protection: No
12/2/2019 8:03:19 PM> Extended CSD Information :
12/2/2019 8:03:19 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
12/2/2019 8:03:19 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
12/2/2019 8:03:19 PM> Boot Bus Config: 0x00 , width 1bit
12/2/2019 8:03:19 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
12/2/2019 8:03:19 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
12/2/2019 8:03:19 PM> Device supports partitioning features
12/2/2019 8:03:19 PM> Device can have enhanced technological features in partitions and user data area
12/2/2019 8:03:19 PM> Device can have extended partitions attribute
12/2/2019 8:03:19 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
12/2/2019 8:03:19 PM> Backup saved: H8G4u_19572856_20191202_200319.extcsd
12/2/2019 8:03:19 PM> EMMC Init completed.
12/2/2019 8:03:19 PM>
12/2/2019 8:03:19 PM> Get firmware version
12/2/2019 8:03:19 PM>
12/2/2019 8:03:28 PM> Brand = samsung
12/2/2019 8:03:28 PM> Manufacturer = samsung
12/2/2019 8:03:28 PM> Device = grandpplte
12/2/2019 8:03:28 PM> Model = SM-G532G
12/2/2019 8:03:28 PM> Phone platform = mt6737t
12/2/2019 8:03:28 PM> CPU Abi = armeabi-v7a
12/2/2019 8:03:28 PM> Mediatek platform = MT6737T
12/2/2019 8:03:28 PM> Android release = 6.0.1
12/2/2019 8:03:28 PM> Firmware version = MMB29T.G532GDXU1APJ7
12/2/2019 8:03:28 PM> Firmware date = Wed Oct 26 23:36:39 KST 2016
12/2/2019 8:04:16 PM>
12/2/2019 8:04:16 PM> Looking for EasyJTAG box...
12/2/2019 8:04:16 PM> EasyJTAG API ver. 3307
12/2/2019 8:04:16 PM> Setting IO Levels to 3.3V
12/2/2019 8:04:16 PM> Setting frequence to 21 MHz
12/2/2019 8:04:17 PM> EasyJTAG Box Serial = 0B011006F8DECFFA
12/2/2019 8:04:17 PM> EasyJTAG Box Firmware = 1.63
12/2/2019 8:04:21 PM> HiPower mode is ON
12/2/2019 8:04:21 PM> Setting frequence to 21 MHz
12/2/2019 8:04:21 PM> CMD Pullup Level: 1969 mV
12/2/2019 8:04:21 PM> CMD Active Level: 2887 mV
12/2/2019 8:04:21 PM> eMMC Init returned = 0
12/2/2019 8:04:21 PM> EMMC Device Information :
12/2/2019 8:04:21 PM> EMMC CID: 90014A48384734759201195728561534
12/2/2019 8:04:21 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
12/2/2019 8:04:21 PM> EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 19572856 , rev. 0x01
12/2/2019 8:04:21 PM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 1/2018
12/2/2019 8:04:21 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
12/2/2019 8:04:21 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
12/2/2019 8:04:21 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
12/2/2019 8:04:21 PM> EMMC Permanent Write Protection: No
12/2/2019 8:04:21 PM> EMMC Temporary Write Protection: No
12/2/2019 8:04:21 PM> Extended CSD Information :
12/2/2019 8:04:21 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
12/2/2019 8:04:21 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
12/2/2019 8:04:21 PM> Boot Bus Config: 0x00 , width 1bit
12/2/2019 8:04:21 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
12/2/2019 8:04:21 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
12/2/2019 8:04:21 PM> Device supports partitioning features
12/2/2019 8:04:21 PM> Device can have enhanced technological features in partitions and user data area
12/2/2019 8:04:21 PM> Device can have extended partitions attribute
12/2/2019 8:04:21 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
12/2/2019 8:04:21 PM> Backup saved: H8G4u_19572856_20191202_200421.extcsd
12/2/2019 8:04:21 PM> EMMC Init completed.
12/2/2019 8:04:21 PM>
12/2/2019 8:04:21 PM> Opening file: E:\download\G532G DEAD BOOT REPAIR FILE\G532G DEAD BOOT REPAIR FILE\GRANDPPLTE_CIS_SER.pit
12/2/2019 8:04:21 PM>
12/2/2019 8:04:21 PM> Pit: GRANDPPLTE_CIS_SER.pit
12/2/2019 8:04:21 PM> Entry count: 34
12/2/2019 8:04:21 PM>
12/2/2019 8:04:21 PM> The size of the last section has been updated
12/2/2019 8:05:06 PM> Selected file: E:\download\NPL-G532GDDU1ASA3_G532GODD1BRL1-20190124\BL_G532GDDU1ASA3_CL14107410_QB21621617_RE V00_user_low_ship_MULTI_CERT.tar.md5
12/2/2019 8:05:06 PM>
12/2/2019 8:05:06 PM> BL_G532GDDU1ASA3_CL14107410_QB21621617_REV00_user_ low_ship_MULTI_CERT.tar.md5
12/2/2019 8:05:06 PM> The list of files in the firmware:
12/2/2019 8:05:06 PM> preloader.img
12/2/2019 8:05:06 PM> lk.bin
12/2/2019 8:05:06 PM> param.bin
12/2/2019 8:05:06 PM> trustzone.bin
12/2/2019 8:05:06 PM> efuse.img
12/2/2019 8:05:06 PM>
12/2/2019 8:05:14 PM> Looking for EasyJTAG box...
12/2/2019 8:05:14 PM> EasyJTAG API ver. 3307
12/2/2019 8:05:14 PM> Setting IO Levels to 3.3V
12/2/2019 8:05:14 PM> Setting frequence to 21 MHz
12/2/2019 8:05:15 PM> EasyJTAG Box Serial = 0B011006F8DECFFA
12/2/2019 8:05:15 PM> EasyJTAG Box Firmware = 1.63
12/2/2019 8:05:18 PM> HiPower mode is ON
12/2/2019 8:05:18 PM> Setting frequence to 21 MHz
12/2/2019 8:05:18 PM> CMD Pullup Level: 1928 mV
12/2/2019 8:05:18 PM> CMD Active Level: 2835 mV
12/2/2019 8:05:19 PM> eMMC Init returned = 0
12/2/2019 8:05:19 PM> EMMC Device Information :
12/2/2019 8:05:19 PM> EMMC CID: 90014A48384734759201195728561534
12/2/2019 8:05:19 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
12/2/2019 8:05:19 PM> EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 19572856 , rev. 0x01
12/2/2019 8:05:19 PM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 1/2018
12/2/2019 8:05:19 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
12/2/2019 8:05:19 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
12/2/2019 8:05:19 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
12/2/2019 8:05:19 PM> EMMC Permanent Write Protection: No
12/2/2019 8:05:19 PM> EMMC Temporary Write Protection: No
12/2/2019 8:05:19 PM> Extended CSD Information :
12/2/2019 8:05:19 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
12/2/2019 8:05:19 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
12/2/2019 8:05:19 PM> Boot Bus Config: 0x00 , width 1bit
12/2/2019 8:05:19 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
12/2/2019 8:05:19 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
12/2/2019 8:05:19 PM> Device supports partitioning features
12/2/2019 8:05:19 PM> Device can have enhanced technological features in partitions and user data area
12/2/2019 8:05:19 PM> Device can have extended partitions attribute
12/2/2019 8:05:19 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
12/2/2019 8:05:19 PM> Backup saved: H8G4u_19572856_20191202_200519.extcsd
12/2/2019 8:05:19 PM> EMMC Init completed.
12/2/2019 8:05:19 PM>
12/2/2019 8:05:19 PM> Operation: Write by vendor (Samsung)
12/2/2019 8:05:19 PM>
12/2/2019 8:05:19 PM> Creating GPT-partitioninig
12/2/2019 8:05:19 PM> Writing PrimaryGPT at address: 000000000000
12/2/2019 8:05:19 PM> Writing BackupGPT at address: 0001D1FFBE00
12/2/2019 8:05:19 PM> Writing PIT at address: 000000004400
12/2/2019 8:05:19 PM> GPT-partitioning done
12/2/2019 8:05:19 PM>
12/2/2019 8:05:19 PM> Unpacking file: preloader.img
12/2/2019 8:05:19 PM> Unpacking file: lk.bin
12/2/2019 8:05:19 PM> Unpacking file: efuse.img
12/2/2019 8:05:19 PM> Unpacking file: trustzone.bin
12/2/2019 8:05:19 PM> Unpacking file: param.bin
12/2/2019 8:05:19 PM>
12/2/2019 8:05:19 PM> Partition name: BOOTLOADER
12/2/2019 8:05:19 PM> Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
12/2/2019 8:05:19 PM> eMMC switching to ROM2
12/2/2019 8:05:20 PM> Erasing partition...
12/2/2019 8:05:41 PM> Writing partition...
12/2/2019 8:05:42 PM> Done writing partition. Write speed: 166.43 KB/s
12/2/2019 8:05:42 PM> Partition name: LK
12/2/2019 8:05:42 PM> Filename: lk.bin , Offset: 000001000000 , filesize: 614912 bytes
12/2/2019 8:05:42 PM> eMMC switching to ROM1
12/2/2019 8:05:42 PM> Erasing partition...
12/2/2019 8:05:45 PM> Writing partition...
12/2/2019 8:05:47 PM> Done writing partition. Write speed: 330.41 KB/s
12/2/2019 8:05:47 PM> Partition name: EFUSE
12/2/2019 8:05:47 PM> Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
12/2/2019 8:05:47 PM> eMMC switching to ROM1
12/2/2019 8:05:47 PM> Erasing partition...
12/2/2019 8:05:48 PM> Writing partition...
12/2/2019 8:05:48 PM> Done writing partition. Write speed: 15.02 KB/s
12/2/2019 8:05:48 PM> Partition name: TEE1
12/2/2019 8:05:48 PM> Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
12/2/2019 8:05:48 PM> eMMC switching to ROM1
12/2/2019 8:05:48 PM> Erasing partition...
12/2/2019 8:05:49 PM> Writing partition...
12/2/2019 8:05:50 PM> Done writing partition. Write speed: 475.51 KB/s
12/2/2019 8:05:50 PM> Partition name: PARAM
12/2/2019 8:05:50 PM> Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
12/2/2019 8:05:50 PM> eMMC switching to ROM1
12/2/2019 8:05:50 PM> Erasing partition...
12/2/2019 8:05:52 PM> Writing partition...
12/2/2019 8:05:53 PM> Done writing partition. Write speed: 532.61 KB/s
12/2/2019 8:06:08 PM>
12/2/2019 8:06:08 PM> Check BootConfig for the selected vendor
12/2/2019 8:06:08 PM>
12/2/2019 8:06:08 PM> All done time: [00:00:48:952]
12/2/2019 8:06:08 PM>
12/2/2019 8:06:23 PM> Looking for EasyJTAG box...
12/2/2019 8:06:23 PM> EasyJTAG API ver. 3307
12/2/2019 8:06:23 PM> Setting IO Levels to 3.3V
12/2/2019 8:06:23 PM> Setting frequence to 21 MHz
12/2/2019 8:06:24 PM> EasyJTAG Box Serial = 0B011006F8DECFFA
12/2/2019 8:06:24 PM> EasyJTAG Box Firmware = 1.63
12/2/2019 8:06:28 PM> HiPower mode is ON
12/2/2019 8:06:28 PM> Setting frequence to 21 MHz
12/2/2019 8:06:28 PM> CMD Pullup Level: 2072 mV
12/2/2019 8:06:28 PM> CMD Active Level: 2959 mV
12/2/2019 8:06:28 PM> eMMC Init returned = 0
12/2/2019 8:06:28 PM> EMMC Device Information :
12/2/2019 8:06:28 PM> EMMC CID: 90014A48384734759201195728561534
12/2/2019 8:06:28 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
12/2/2019 8:06:28 PM> EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 19572856 , rev. 0x01
12/2/2019 8:06:28 PM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 1/2018
12/2/2019 8:06:28 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
12/2/2019 8:06:28 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
12/2/2019 8:06:28 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
12/2/2019 8:06:28 PM> EMMC Permanent Write Protection: No
12/2/2019 8:06:28 PM> EMMC Temporary Write Protection: No
12/2/2019 8:06:28 PM> Extended CSD Information :
12/2/2019 8:06:28 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
12/2/2019 8:06:28 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
12/2/2019 8:06:28 PM> Boot Bus Config: 0x00 , width 1bit
12/2/2019 8:06:28 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
12/2/2019 8:06:28 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
12/2/2019 8:06:28 PM> Device supports partitioning features
12/2/2019 8:06:28 PM> Device can have enhanced technological features in partitions and user data area
12/2/2019 8:06:28 PM> Device can have extended partitions attribute
12/2/2019 8:06:28 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
12/2/2019 8:06:28 PM> Backup saved: H8G4u_19572856_20191202_200628.extcsd
12/2/2019 8:06:28 PM> EMMC Init completed.
12/2/2019 8:06:28 PM>
12/2/2019 8:06:28 PM> Operation: Write by vendor (Samsung)
12/2/2019 8:06:28 PM>
12/2/2019 8:06:28 PM> Creating GPT-partitioninig
12/2/2019 8:06:28 PM> Writing PrimaryGPT at address: 000000000000
12/2/2019 8:06:28 PM> Writing BackupGPT at address: 0001D1FFBE00
12/2/2019 8:06:29 PM> Writing PIT at address: 000000004400
12/2/2019 8:06:29 PM> GPT-partitioning done
12/2/2019 8:06:29 PM>
12/2/2019 8:06:29 PM> Unpacking file: preloader.img
12/2/2019 8:06:29 PM> Unpacking file: lk.bin
12/2/2019 8:06:29 PM> Unpacking file: efuse.img
12/2/2019 8:06:29 PM> Unpacking file: trustzone.bin
12/2/2019 8:06:29 PM> Unpacking file: param.bin
12/2/2019 8:06:29 PM>
12/2/2019 8:06:29 PM> Partition name: BOOTLOADER
12/2/2019 8:06:29 PM> Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
12/2/2019 8:06:29 PM> eMMC switching to ROM2
12/2/2019 8:06:29 PM> Erasing partition...
12/2/2019 8:06:50 PM> Writing partition...
12/2/2019 8:06:51 PM> Done writing partition. Write speed: 159.44 KB/s
12/2/2019 8:06:51 PM> Partition name: LK
12/2/2019 8:06:51 PM> Filename: lk.bin , Offset: 000001000000 , filesize: 614912 bytes
12/2/2019 8:06:51 PM> eMMC switching to ROM1
12/2/2019 8:06:52 PM> Erasing partition...
12/2/2019 8:06:54 PM> Writing partition...
12/2/2019 8:06:56 PM> Done writing partition. Write speed: 288.42 KB/s
12/2/2019 8:06:56 PM> Partition name: EFUSE
12/2/2019 8:06:56 PM> Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
12/2/2019 8:06:56 PM> eMMC switching to ROM1
12/2/2019 8:06:57 PM> Erasing partition...
12/2/2019 8:06:57 PM> Writing partition...
12/2/2019 8:06:57 PM> Done writing partition. Write speed: 14.68 KB/s
12/2/2019 8:06:57 PM> Partition name: TEE1
12/2/2019 8:06:57 PM> Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
12/2/2019 8:06:57 PM> eMMC switching to ROM1
12/2/2019 8:06:58 PM> Erasing partition...
12/2/2019 8:06:59 PM> Writing partition...
12/2/2019 8:07:00 PM> Done writing partition. Write speed: 445.95 KB/s
12/2/2019 8:07:00 PM> Partition name: PARAM
12/2/2019 8:07:00 PM> Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
12/2/2019 8:07:00 PM> eMMC switching to ROM1
12/2/2019 8:07:00 PM> Erasing partition...
12/2/2019 8:07:02 PM> Writing partition...
12/2/2019 8:07:03 PM> Done writing partition. Write speed: 560.99 KB/s
12/2/2019 8:07:06 PM>
12/2/2019 8:07:07 PM> Operation: Writing BootConfig ...
12/2/2019 8:07:07 PM> Reg: 179 Value: 0x48
12/2/2019 8:07:07 PM> Reg: 177 Value: 0x00
12/2/2019 8:07:08 PM> Reg: 162 Value: 0x01
12/2/2019 8:07:09 PM> Done
12/2/2019 8:07:09 PM>
12/2/2019 8:07:09 PM> All done time: [00:00:39:994]
12/2/2019 8:07:09 PM>
12/2/2019 8:07:13 PM> Looking for EasyJTAG box...
12/2/2019 8:07:13 PM> EasyJTAG API ver. 3307
12/2/2019 8:07:13 PM> Setting IO Levels to 3.3V
12/2/2019 8:07:13 PM> Setting frequence to 21 MHz
12/2/2019 8:07:15 PM> EasyJTAG Box Serial = 0B011006F8DECFFA
12/2/2019 8:07:15 PM> EasyJTAG Box Firmware = 1.63
12/2/2019 8:07:18 PM> HiPower mode is ON
12/2/2019 8:07:18 PM> Setting frequence to 21 MHz
12/2/2019 8:07:18 PM> CMD Pullup Level: 2052 mV
12/2/2019 8:07:18 PM> CMD Active Level: 2918 mV
12/2/2019 8:07:19 PM> eMMC Init returned = 0
12/2/2019 8:07:19 PM> EMMC Device Information :
12/2/2019 8:07:19 PM> EMMC CID: 90014A48384734759201195728561534
12/2/2019 8:07:19 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
12/2/2019 8:07:19 PM> EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 19572856 , rev. 0x01
12/2/2019 8:07:19 PM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 1/2018
12/2/2019 8:07:19 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
12/2/2019 8:07:19 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
12/2/2019 8:07:19 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
12/2/2019 8:07:19 PM> EMMC Permanent Write Protection: No
12/2/2019 8:07:19 PM> EMMC Temporary Write Protection: No
12/2/2019 8:07:19 PM> Extended CSD Information :
12/2/2019 8:07:19 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
12/2/2019 8:07:19 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
12/2/2019 8:07:19 PM> Boot Bus Config: 0x00 , width 1bit
12/2/2019 8:07:19 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
12/2/2019 8:07:19 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
12/2/2019 8:07:19 PM> Device supports partitioning features
12/2/2019 8:07:19 PM> Device can have enhanced technological features in partitions and user data area
12/2/2019 8:07:19 PM> Device can have extended partitions attribute
12/2/2019 8:07:19 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
12/2/2019 8:07:19 PM> Backup saved: H8G4u_19572856_20191202_200719.extcsd
12/2/2019 8:07:19 PM> EMMC Init completed.
12/2/2019 8:07:19 PM>
12/2/2019 8:07:19 PM> Get firmware version
12/2/2019 8:07:19 PM>
12/2/2019 8:07:27 PM> Brand = samsung
12/2/2019 8:07:27 PM> Manufacturer = samsung
12/2/2019 8:07:27 PM> Device = grandpplte
12/2/2019 8:07:27 PM> Model = SM-G532G
12/2/2019 8:07:27 PM> Phone platform = mt6737t
12/2/2019 8:07:27 PM> CPU Abi = armeabi-v7a
12/2/2019 8:07:27 PM> Mediatek platform = MT6737T
12/2/2019 8:07:27 PM> Android release = 6.0.1
12/2/2019 8:07:27 PM> Firmware version = MMB29T.G532GDXU1APJ7
12/2/2019 8:07:27 PM> Firmware date = Wed Oct 26 23:36:39 KST 2016
  Reply With Quote
Old 12-02-2019, 19:39   #439 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 43
Posts: 1,648
Member: 13148
Status: Offline
Thanks Meter: 1,446
You need read forum sometime to know how to work with the program

http://forum.gsmhosting.com/vbb/f672.../#post13889604
  Reply With Quote
Old 12-03-2019, 13:48   #440 (permalink)
No Life Poster
 
kamraankisskiss's Avatar
 
Join Date: Mar 2010
Location: pakistan jhelum
Posts: 905
Member: 1261180
Status: Online
Sonork: 100.1590645
Thanks Meter: 86
can u give me full detail because first time try to repair boot.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 14:00.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.40146 seconds with 8 queries

SEO by vBSEO