GPT Error - GSM-Forum

mobirepair · 02-07-2018, 07:33

Hi Team..
Im having HW PART CONFIG FAIL error while making GPT Partition..while if i try to make same GPT Partition in EASY JTAG PLUS Software..that shows partition done sucessful ..but again if i try again in Old Soft EASY JTAG TOOL that again shows error...pls guide me what is this problem............
Logs are below:

MMC CID : 1501004B3758564D420357C0D829717E
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 07/2014 Rev.0x3
EMMC NAME: K7XVMB , S/N: 1472256041
EMMC NAME (HEX): 4B3758564D4200
EMMC ROM1 (Main User Data) Capacity: 3360 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x10] Boot from:ROM3 (Boot Partition 2)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x10.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: K7XVMB_1472256041_20180207_1156.extcsd
Partition table scan:
GPT: not present
Done.

Running:JEDEC: Partitions config burn...
Z3X EasyJtag Software ver. 2.9.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2846 mV
CMD Active Level:2743 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
GP Multiplier: 800000, 8192 Kb, 8Mb
Partition configuration:
No enhanced user data area
User partition write reliability: off
No GP1 partition
GP1 write reliability: on
No GP2 partition
GP2 write reliability: on
No GP3 partition
GP3 write reliability: on
No GP4 partition
GP4 write reliability: on
Card does not support host controlled partition write reliability settings
HW Parts Config Fail.

mickeypopoy · 02-07-2018, 08:00

change emmc ur problem will be solve

mobirepair · 02-07-2018, 09:11

Quote:

Originally Posted by mickeypopoy

change emmc ur problem will be solve

I have this problem in 10 EMMCs out of 12 EMMCs ..while all are giving info and able to format and create boot partitions too....
Mean all of those 10 EMMCs also are dead ??????????

mobirepair · 02-07-2018, 15:32

Anyone there to guide...................

**blang** · 02-08-2018, 15:21

Quote:

Originally Posted by mobirepair

I have this problem in 10 EMMCs out of 12 EMMCs ..while all are giving info and able to format and create boot partitions too....
Mean all of those 10 EMMCs also are dead ??????????

provide mode details about emmc type and other information.

mobirepair · 02-11-2018, 06:31

Sir..as a LG S996 came to me in Dead Boot ,Logs are below...acc to which i want to describe that
First in EMMC info GPT was present
After i format it..Shown NO GPT Present
When tried to make GPT partition..It gives error that :Card does not support host controlled partition write reliability settings
HW Parts Config Fail.

First info in Easy Jtag:
Selected pinout: EasyJTAG GEN1 ISP Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 2.9.0.0
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 06002010C0FA5FCC, ,FW Ver.: 01.62
CMD Pullup Level:2835 mV
CMD Active Level:2763 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 15010042474E4433520108835FADC10E

EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2014 Rev.0x1
EMMC NAME: BGND3R , S/N: 142827437
EMMC NAME (HEX): 42474E44335200
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

---------------------------------------------

Backup saved: BGND3R_ 142827437_20180209_1830.extcsd
Found Data areas (firmware parts) count is: 49
Partition info successfully found
---------------------------------------------

P0 (MODEM) [0x1000000 0x5000000] Size: 80.0MB
P1 (PMIC) [0x6000000 0x80000] Size: 512.0KB
P2 (SBL1) [0x6080000 0x100000] Size: 1.0MB
P3 (TZ) [0x6180000 0x100000] Size: 1.0MB
P4 (SDI) [0x6280000 0x80000] Size: 512.0KB
P5 (HYP) [0x6300000 0x80000] Size: 512.0KB
P6 (RPM) [0x6380000 0x80000] Size: 512.0KB
P7 (ABOOT) [0x6400000 0x200000] Size: 2.0MB
P8 (SBL1BAK) [0x6600000 0x100000] Size: 1.0MB
P9 (PMICBAK) [0x6700000 0x80000] Size: 512.0KB
P10 (TZBAK) [0x6780000 0x100000] Size: 1.0MB
P11 (HYPBAK) [0x6880000 0x80000] Size: 512.0KB
P12 (RPMBAK) [0x6900000 0x80000] Size: 512.0KB
P13 (ABOOTBAK) [0x6980000 0x200000] Size: 2.0MB
P14 (SDIBAK) [0x6b80000 0x80000] Size: 512.0KB
P15 (LIMITS) [0x6c00000 0x80000] Size: 512.0KB
P16 (DEVINFO) [0x6c80000 0x80000] Size: 512.0KB
P17 (APDP) [0x6d00000 0x80000] Size: 512.0KB
P18 (MSADP) [0x6d80000 0x80000] Size: 512.0KB
P19 (DPO) [0x6e00000 0x80000] Size: 512.0KB
P20 (MISC) [0x7000000 0x1000000] Size: 16.0MB
P21 (PERSIST) [0x8000000 0x2000000] Size: 32.0MB
P22 (MODEMST1) [0xa000000 0x180000] Size: 1.500MB
P23 (MODEMST2) [0xa180000 0x180000] Size: 1.500MB
P24 (FSG) [0xa300000 0x180000] Size: 1.500MB
P25 (FSC) [0xa480000 0x80000] Size: 512.0KB
P26 (SSD) [0xa500000 0x80000] Size: 512.0KB
P27 (KEYSTORE) [0xa580000 0x80000] Size: 512.0KB
P28 (DDR) [0xa600000 0x200000] Size: 2.0MB
P29 (SEC) [0xa800000 0x80000] Size: 512.0KB
P30 (ENCRYPT) [0xa880000 0x80000] Size: 512.0KB
P31 (EKSST) [0xa900000 0x80000] Size: 512.0KB
P32 (RCT) [0xa980000 0x2000] Size: 8.0KB
P33 (PERSISTENT) [0xa982000 0x400000] Size: 4.0MB
P34 (LAF) [0xb000000 0x3000000] Size: 48.0MB
P35 (BOOT) [0xe000000 0x2800000] Size: 40.0MB
P36 (RECOVERY) [0x10800000 0x2800000] Size: 40.0MB
P37 (DRM) [0x13000000 0x800000] Size: 8.0MB
P38 (SNS) [0x13800000 0x800000] Size: 8.0MB
P39 (MPT) [0x14000000 0x2000000] Size: 32.0MB
P40 (CARRIER) [0x16000000 0x2800000] Size: 40.0MB
P41 (FACTORY) [0x18800000 0x2e00000] Size: 46.0MB
P42 (FOTA) [0x1b600000 0xa00000] Size: 10.0MB
P43 (RAW_RESOURCES) [0x1c000000 0x400000] Size: 4.0MB
P44 (RAW_RESOURCESBAK) [0x1c400000 0x400000] Size: 4.0MB
P45 (SYSTEM) [0x1c800000 0xff000000] Size: 3.984GB
P46 (CACHE) [0x11b800000 0x4d000000] Size: 1.203GB
P47 (USERDATA) [0x168800000 0x5de800000] Size: 23.476GB
P48 (GROW) [0x747000000 0xbfbe00] Size: 11.983MB
------ Android information ------

Detected LINUX(Android) SYSTEM : 0x001C800000 (3.984GB)
Build ID: LRX21Y
Display Build ID: LRX21Y
Release ID: 5.0.1
Device Model: LGLS996
Device Name: z2_spr_us
Architecture ABI: arm64-v8a
Device manufacturer: LGE
Device Platform: msm8994
Product ID: z2
Build Description: z2_spr_us-user 5.0.1 LRX21Y LS996ZV5.1426313313 release-keys
---------------------------------------------

Format EMMC :
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:2846 mV
CMD Active Level:2763 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.

After Format Info:
Z3X EasyJtag Software ver. 2.9.0.0
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 06002010C0FA5FCC, ,FW Ver.: 01.62
CMD Pullup Level:2846 mV
CMD Active Level:2763 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 15010042474E4433520108835FADC10E

EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2014 Rev.0x1
EMMC NAME: BGND3R , S/N: 142827437
EMMC NAME (HEX): 42474E44335200
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

---------------------------------------------

Backup saved: BGND3R_ 142827437_20180209_1838.extcsd
Done.

Boot Config Setting :
Running:Change BOOT CONFIG...
Z3X EasyJtag Software ver. 2.9.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2846 mV
CMD Active Level:2763 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Writing eMMC Register...
Written: REG : 179 VAL :8 , result 0
Done.

Running:Change BOOT CONFIG...
Z3X EasyJtag Software ver. 2.9.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2846 mV
CMD Active Level:2763 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Writing eMMC Register...
Written: REG : 179 VAL :38 , result 0
Done.

Z3X EasyJtag Software ver. 2.9.0.0
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 06002010C0FA5FCC, ,FW Ver.: 01.62
CMD Pullup Level:2835 mV
CMD Active Level:2774 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 15010042474E4433520108835FADC10E

EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2014 Rev.0x1
EMMC NAME: BGND3R , S/N: 142827437
EMMC NAME (HEX): 42474E44335200
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)

Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x00

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

---------------------------------------------

Backup saved: BGND3R_ 142827437_20180209_1839.extcsd
Done.

Having GPT Error while making GPT Partition :

Running:JEDEC: Partitions config burn...
Z3X EasyJtag Software ver. 2.9.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2835 mV
CMD Active Level:2774 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
GP Multiplier: 800000, 8192 Kb, 8Mb
Partition configuration:
No enhanced user data area
User partition write reliability: off
No GP1 partition

GP1 write reliability: on
No GP2 partition

GP2 write reliability: on
No GP3 partition

GP3 write reliability: on
No GP4 partition

GP4 write reliability: on
Card does not support host controlled partition write reliability settings
HW Parts Config Fail.

Now If i try use use without making GPT partiotion just writing Dump......
Set remains same in Dead Boot Condition

Pls help me.... Where i m making mistake and Is this emmc also beacame scrap like others EMMCs

pai_d · 02-12-2018, 03:36

it's Samsung eMMC.
try experimenting with boot1, 2 & rpmb size.

mobirepair · 02-12-2018, 07:03

Quote:

Originally Posted by pai_d

it's Samsung eMMC.
try experimenting with boot1, 2 & rpmb size.

Cant uderstand ur mean bro...
Pls tell in detail

02-07-2018, 07:33	#1 (permalink)
mobirepair Freak Poster Join Date: Mar 2012 Location: BARNALA Posts: 449 Member: 1734313 Status: Offline Sonork: 100.1620886 Thanks Meter: 70	GPT Error Hi Team.. Im having HW PART CONFIG FAIL error while making GPT Partition..while if i try to make same GPT Partition in EASY JTAG PLUS Software..that shows partition done sucessful ..but again if i try again in Old Soft EASY JTAG TOOL that again shows error...pls guide me what is this problem............ Logs are below: MMC CID : 1501004B3758564D420357C0D829717E EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 07/2014 Rev.0x3 EMMC NAME: K7XVMB , S/N: 1472256041 EMMC NAME (HEX): 4B3758564D4200 EMMC ROM1 (Main User Data) Capacity: 3360 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.7 (MMC 5.0) Boot configuration [PARTITION_CONFIG: 0x10] Boot from:ROM3 (Boot Partition 2) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x10. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01 --------------------------------------------- Backup saved: K7XVMB_1472256041_20180207_1156.extcsd Partition table scan: GPT: not present Done. Running:JEDEC: Partitions config burn... Z3X EasyJtag Software ver. 2.9.0.0 Skip loading eMMC Addon Firmware CMD Pullup Level:2846 mV CMD Active Level:2743 mV Box IO Level:2800 mV CLK Rate:14000 kHz GP Multiplier: 800000, 8192 Kb, 8Mb Partition configuration: No enhanced user data area User partition write reliability: off No GP1 partition GP1 write reliability: on No GP2 partition GP2 write reliability: on No GP3 partition GP3 write reliability: on No GP4 partition GP4 write reliability: on Card does not support host controlled partition write reliability settings HW Parts Config Fail.

02-11-2018, 06:31	#6 (permalink)
mobirepair Freak Poster Join Date: Mar 2012 Location: BARNALA Posts: 449 Member: 1734313 Status: Offline Sonork: 100.1620886 Thanks Meter: 70	Sir..as a LG S996 came to me in Dead Boot ,Logs are below...acc to which i want to describe that First in EMMC info GPT was present After i format it..Shown NO GPT Present When tried to make GPT partition..It gives error that :Card does not support host controlled partition write reliability settings HW Parts Config Fail. First info in Easy Jtag: Selected pinout: EasyJTAG GEN1 ISP Pinout Change EasyJTAG Pinout OK Z3X EasyJtag Software ver. 2.9.0.0 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 06002010C0FA5FCC, ,FW Ver.: 01.62 CMD Pullup Level:2835 mV CMD Active Level:2763 mV Box IO Level:2800 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- EMMC CID : 15010042474E4433520108835FADC10E EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 12/2014 Rev.0x1 EMMC NAME: BGND3R , S/N: 142827437 EMMC NAME (HEX): 42474E44335200 EMMC ROM1 (Main User Data) Capacity: 29820 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.7 (MMC 5.0) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: BGND3R_ 142827437_20180209_1830.extcsd Found Data areas (firmware parts) count is: 49 Partition info successfully found --------------------------------------------- P0 (MODEM) [0x1000000 0x5000000] Size: 80.0MB P1 (PMIC) [0x6000000 0x80000] Size: 512.0KB P2 (SBL1) [0x6080000 0x100000] Size: 1.0MB P3 (TZ) [0x6180000 0x100000] Size: 1.0MB P4 (SDI) [0x6280000 0x80000] Size: 512.0KB P5 (HYP) [0x6300000 0x80000] Size: 512.0KB P6 (RPM) [0x6380000 0x80000] Size: 512.0KB P7 (ABOOT) [0x6400000 0x200000] Size: 2.0MB P8 (SBL1BAK) [0x6600000 0x100000] Size: 1.0MB P9 (PMICBAK) [0x6700000 0x80000] Size: 512.0KB P10 (TZBAK) [0x6780000 0x100000] Size: 1.0MB P11 (HYPBAK) [0x6880000 0x80000] Size: 512.0KB P12 (RPMBAK) [0x6900000 0x80000] Size: 512.0KB P13 (ABOOTBAK) [0x6980000 0x200000] Size: 2.0MB P14 (SDIBAK) [0x6b80000 0x80000] Size: 512.0KB P15 (LIMITS) [0x6c00000 0x80000] Size: 512.0KB P16 (DEVINFO) [0x6c80000 0x80000] Size: 512.0KB P17 (APDP) [0x6d00000 0x80000] Size: 512.0KB P18 (MSADP) [0x6d80000 0x80000] Size: 512.0KB P19 (DPO) [0x6e00000 0x80000] Size: 512.0KB P20 (MISC) [0x7000000 0x1000000] Size: 16.0MB P21 (PERSIST) [0x8000000 0x2000000] Size: 32.0MB P22 (MODEMST1) [0xa000000 0x180000] Size: 1.500MB P23 (MODEMST2) [0xa180000 0x180000] Size: 1.500MB P24 (FSG) [0xa300000 0x180000] Size: 1.500MB P25 (FSC) [0xa480000 0x80000] Size: 512.0KB P26 (SSD) [0xa500000 0x80000] Size: 512.0KB P27 (KEYSTORE) [0xa580000 0x80000] Size: 512.0KB P28 (DDR) [0xa600000 0x200000] Size: 2.0MB P29 (SEC) [0xa800000 0x80000] Size: 512.0KB P30 (ENCRYPT) [0xa880000 0x80000] Size: 512.0KB P31 (EKSST) [0xa900000 0x80000] Size: 512.0KB P32 (RCT) [0xa980000 0x2000] Size: 8.0KB P33 (PERSISTENT) [0xa982000 0x400000] Size: 4.0MB P34 (LAF) [0xb000000 0x3000000] Size: 48.0MB P35 (BOOT) [0xe000000 0x2800000] Size: 40.0MB P36 (RECOVERY) [0x10800000 0x2800000] Size: 40.0MB P37 (DRM) [0x13000000 0x800000] Size: 8.0MB P38 (SNS) [0x13800000 0x800000] Size: 8.0MB P39 (MPT) [0x14000000 0x2000000] Size: 32.0MB P40 (CARRIER) [0x16000000 0x2800000] Size: 40.0MB P41 (FACTORY) [0x18800000 0x2e00000] Size: 46.0MB P42 (FOTA) [0x1b600000 0xa00000] Size: 10.0MB P43 (RAW_RESOURCES) [0x1c000000 0x400000] Size: 4.0MB P44 (RAW_RESOURCESBAK) [0x1c400000 0x400000] Size: 4.0MB P45 (SYSTEM) [0x1c800000 0xff000000] Size: 3.984GB P46 (CACHE) [0x11b800000 0x4d000000] Size: 1.203GB P47 (USERDATA) [0x168800000 0x5de800000] Size: 23.476GB P48 (GROW) [0x747000000 0xbfbe00] Size: 11.983MB ------ Android information ------ Detected LINUX(Android) SYSTEM : 0x001C800000 (3.984GB) Build ID: LRX21Y Display Build ID: LRX21Y Release ID: 5.0.1 Device Model: LGLS996 Device Name: z2_spr_us Architecture ABI: arm64-v8a Device manufacturer: LGE Device Platform: msm8994 Product ID: z2 Build Description: z2_spr_us-user 5.0.1 LRX21Y LS996ZV5.1426313313 release-keys --------------------------------------------- Format EMMC : Running:SAMSUNG: MoviNAND Factory Reset... Skip loading eMMC Addon Firmware CMD Pullup Level:2846 mV CMD Active Level:2763 mV Box IO Level:2800 mV CLK Rate:14000 kHz Sending Smart Wipe Request... Wiping Card... Please do not touch it! Please don't forget to repair extCSD from backup! Done. After Format Info: Z3X EasyJtag Software ver. 2.9.0.0 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 06002010C0FA5FCC, ,FW Ver.: 01.62 CMD Pullup Level:2846 mV CMD Active Level:2763 mV Box IO Level:2800 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- EMMC CID : 15010042474E4433520108835FADC10E EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 12/2014 Rev.0x1 EMMC NAME: BGND3R , S/N: 142827437 EMMC NAME (HEX): 42474E44335200 EMMC ROM1 (Main User Data) Capacity: 29820 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.7 (MMC 5.0) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: BGND3R_ 142827437_20180209_1838.extcsd Done. Boot Config Setting : Running:Change BOOT CONFIG... Z3X EasyJtag Software ver. 2.9.0.0 Skip loading eMMC Addon Firmware CMD Pullup Level:2846 mV CMD Active Level:2763 mV Box IO Level:2800 mV CLK Rate:14000 kHz Writing eMMC Register... Written: REG : 179 VAL :8 , result 0 Done. Running:Change BOOT CONFIG... Z3X EasyJtag Software ver. 2.9.0.0 Skip loading eMMC Addon Firmware CMD Pullup Level:2846 mV CMD Active Level:2763 mV Box IO Level:2800 mV CLK Rate:14000 kHz Writing eMMC Register... Written: REG : 179 VAL :38 , result 0 Done. Z3X EasyJtag Software ver. 2.9.0.0 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 06002010C0FA5FCC, ,FW Ver.: 01.62 CMD Pullup Level:2835 mV CMD Active Level:2774 mV Box IO Level:2800 mV CLK Rate:14000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- EMMC CID : 15010042474E4433520108835FADC10E EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 12/2014 Rev.0x1 EMMC NAME: BGND3R , S/N: 142827437 EMMC NAME (HEX): 42474E44335200 EMMC ROM1 (Main User Data) Capacity: 29820 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.7 (MMC 5.0) Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: BGND3R_ 142827437_20180209_1839.extcsd Done. Having GPT Error while making GPT Partition : Running:JEDEC: Partitions config burn... Z3X EasyJtag Software ver. 2.9.0.0 Skip loading eMMC Addon Firmware CMD Pullup Level:2835 mV CMD Active Level:2774 mV Box IO Level:2800 mV CLK Rate:14000 kHz GP Multiplier: 800000, 8192 Kb, 8Mb Partition configuration: No enhanced user data area User partition write reliability: off No GP1 partition GP1 write reliability: on No GP2 partition GP2 write reliability: on No GP3 partition GP3 write reliability: on No GP4 partition GP4 write reliability: on Card does not support host controlled partition write reliability settings HW Parts Config Fail. Now If i try use use without making GPT partiotion just writing Dump...... Set remains same in Dead Boot Condition Pls help me.... Where i m making mistake and Is this emmc also beacame scrap like others EMMCs Last edited by mobirepair; 02-11-2018 at 06:41. Reason: Editing

02-07-2018, 08:00	#2 (permalink)
mickeypopoy Insane Poster Join Date: Dec 2008 Posts: 72 Member: 921124 Status: Offline Thanks Meter: 8	change emmc ur problem will be solve

02-07-2018, 15:32	#4 (permalink)
mobirepair Freak Poster Join Date: Mar 2012 Location: BARNALA Posts: 449 Member: 1734313 Status: Offline Sonork: 100.1620886 Thanks Meter: 70	Anyone there to guide...................

02-12-2018, 03:36	#7 (permalink)
pai_d Freak Poster Join Date: Sep 2009 Location: Indonesia Posts: 269 Member: 1112585 Status: Offline Sonork: 100.1645028 Thanks Meter: 91	it's Samsung eMMC. try experimenting with boot1, 2 & rpmb size.