GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 08-15-2014, 08:24   #1 (permalink)
No Life Poster
 
Join Date: Apr 2006
Location: syria
Posts: 768
Member: 257716
Status: Offline
Sonork: 1650684
Thanks Meter: 53
help with n7100 dead


help with n7100 dead i repaier boot but when i write dump file iget this erorr
Z3X EasyJtag Software ver. 1.6.1.1
Loading eMMC Addon Firmware... IO: 2850 mV
Box S/N: ,FW Ver.: 01.50
Warning: CMD Pullup Level (825 mV) too low , check cables etc.!!!
CMD Active Level:2248 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1C01A144B7F64
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 07/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 3222934603
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_3222934603_20140705_0921.extcsd
Done.
Running:Change BOOT CONFIG...

Z3X EasyJtag Software ver. 1.6.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:825 mV
CMD Active Level:2248 mV
Writing eMMC Register...
Written: REG : 179 VAL :48
Done.
Running:Change BOOT WIDTH...

Z3X EasyJtag Software ver. 1.6.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:825 mV
CMD Active Level:2248 mV
Writing eMMC Register...
Written: REG : 177 VAL :1
Done.
log write dump
Z3X EasyJtag Software ver. 1.6.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:825 mV
CMD Active Level:2248 mV
Writing eMMC Register...
Written: REG : 179 VAL :48
Done.
Running:Change BOOT WIDTH...

Z3X EasyJtag Software ver. 1.6.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:825 mV
CMD Active Level:2248 mV
Writing eMMC Register...
Written: REG : 177 VAL :1
Done.

Z3X EasyJtag Software ver. 1.6.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:825 mV
CMD Active Level:2248 mV
Input file : D:\s6312\n7100\N7100_Rom1_Alive_Dump_BN.bin
Writing 000020000000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Write Length has been corrected to 0x000000200000 bytes...
Retry writing adress 0x00000000 (Attempt #1)...
Retry Fail !!!
Retry writing adress 0x00000000 (Attempt #2)...
Retry Fail !!!
Retry writing adress 0x00000000 (Attempt #3)...
Retry Fail !!!
Write Block Failed, Reason: DATA SND CRC Error
  Reply With Quote
Old 08-18-2014, 03:22   #2 (permalink)
No Life Poster
 
Join Date: Apr 2006
Location: syria
Posts: 768
Member: 257716
Status: Offline
Sonork: 1650684
Thanks Meter: 53
steel no answer from team
  Reply With Quote
Old 08-18-2014, 08:47   #3 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: (03434940123)PAKISTAN
Posts: 1,023
Member: 585807
Status: Offline
Thanks Meter: 759
Donate money to this user
Quote:
Originally Posted by harold6x View Post
steel no answer from team
repaire name 0000
and boot config than write rom 1 512 mb and rom2 2mb
your phone alive
how to repaire oooo search button use
  Reply With Quote
Old 08-19-2014, 07:08   #4 (permalink)
No Life Poster
 
Join Date: Apr 2006
Location: syria
Posts: 768
Member: 257716
Status: Offline
Sonork: 1650684
Thanks Meter: 53
EMMC NAME: VTU00M , S/N: 3222934603 not000000
  Reply With Quote
Old 08-19-2014, 10:31   #5 (permalink)
Freak Poster
 
Mansour Pakdel's Avatar
 
Join Date: May 2014
Posts: 161
Member: 2186335
Status: Offline
Thanks Meter: 44
from log I can see you changed boot config attach new log to see your boot partition
  Reply With Quote
Old 08-20-2014, 11:15   #6 (permalink)
Product Manager
 
blang's Avatar
 
Join Date: Oct 2000
Location: future
Posts: 21,466
Member: 2368
Status: Offline
Sonork: 100.111111
Thanks Meter: 178,041
looks like EMMC bad. change EMMC and see result.
  Reply With Quote
Old 08-22-2014, 14:20   #7 (permalink)
Freak Poster
 
lifegood8's Avatar
 
Join Date: Apr 2008
Location: gsmworld
Posts: 447
Member: 757297
Status: Offline
Thanks Meter: 35
Thumbs up try to find this emmc on markit

try to find this emmc .
i uplod emmc picture on this link
https://mega.co.nz/#!Fsk0WBhA!kzCdi2...yilseuGT-ocXPU.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 18:02.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.25887 seconds with 7 queries

SEO by vBSEO