help.. p3100 try to repair deadboot - GSM-Forum

memun · 07-07-2014, 13:11

hello,mr blang..ia have a p3100 bricked,i try to repair use easy jtag but cannot connect to phone,soldering is ok,
this is the log

EasyJtag Suite ver.: 1.5.6.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG GT-P3100 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 0400001D0E061858 ,FW Ver.: 01.50
Connecting to Target...
Done with error(s)...

i try to repair use emmc direct but error too
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
Can't init EMMC, Reason: CMD Timeout Error

is that emmc totally damage??or wrong in the repair step??

**blang** · 07-07-2014, 15:52

Quote:

Originally Posted by memun

hello,mr blang..ia have a p3100 bricked,i try to repair use easy jtag but cannot connect to phone,soldering is ok,
this is the log

EasyJtag Suite ver.: 1.5.6.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG GT-P3100 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 0400001D0E061858 ,FW Ver.: 01.50
Connecting to Target...
Done with error(s)...

i try to repair use emmc direct but error too
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
Can't init EMMC, Reason: CMD Timeout Error

is that emmc totally damage??or wrong in the repair step??

wrong connection of fully damaged phone hardware

memun · 07-08-2014, 13:19

thats mean i have to change the emmc ic??

magdiwa · 10-23-2015, 05:07

me to to sir same problem done with errors i try other phone like samsung gt-s5260p phone but same error sir done with error pls. help sir thank you so much

i follow the pinout from the picture at the z3x easy jtag folder

magdiwa · 11-19-2015, 10:46

me to sir with error i using moorc jpin

07-07-2014, 13:11	#1 (permalink)
memun Junior Member Join Date: Aug 2007 Posts: 36 Member: 569082 Status: Offline Thanks Meter: 3	help.. p3100 try to repair deadboot hello,mr blang..ia have a p3100 bricked,i try to repair use easy jtag but cannot connect to phone,soldering is ok, this is the log EasyJtag Suite ver.: 1.5.6.0 / wxWidgets 3.1.0-W-U started. Operating system ver.: Windows 7 (build 7601, Service Pack 1). For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL Check security...OK Initialising: SAMSUNG GT-P3100 Config ver.:1.00 I/O Level set to : 2600 mV Box S/N: 0400001D0E061858 ,FW Ver.: 01.50 Connecting to Target... Done with error(s)... i try to repair use emmc direct but error too xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx Can't init EMMC, Reason: CMD Timeout Error is that emmc totally damage??or wrong in the repair step??

07-08-2014, 13:19	#3 (permalink)
memun Junior Member Join Date: Aug 2007 Posts: 36 Member: 569082 Status: Offline Thanks Meter: 3	thats mean i have to change the emmc ic??

10-23-2015, 05:07	#4 (permalink)
magdiwa Insane Poster Join Date: Dec 2013 Location: laoag city ilocos norte philip Posts: 85 Member: 2080797 Status: Offline Sonork: I love karl & vinice Thanks Meter: 10	me to to sir same problem done with errors i try other phone like samsung gt-s5260p phone but same error sir done with error pls. help sir thank you so much i follow the pinout from the picture at the z3x easy jtag folder

11-19-2015, 10:46	#5 (permalink)
magdiwa Insane Poster Join Date: Dec 2013 Location: laoag city ilocos norte philip Posts: 85 Member: 2080797 Status: Offline Sonork: I love karl & vinice Thanks Meter: 10	me to sir with error i using moorc jpin