02-19-2018, 16:29
|
#1 (permalink)
|
| No Life Poster
Join Date: Feb 2015 Location: IRAN-TABRIIZ
Posts: 928
Member: 2339474
Status: Offline Sonork: 100.1662352 Thanks Meter: 332 |  hi team. where is wrong!
jtag plus - Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 12 Mhz
CMD Pullup Level: 2983 mV
CMD Active Level: 2790 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 12 Mhz
CMD Pullup Level: 2989 mV
CMD Active Level: 2789 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 12 Mhz
CMD Pullup Level: 2989 mV
CMD Active Level: 2791 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 2990 mV
CMD Active Level: 2790 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 Mhz
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 12 Mhz
CMD Pullup Level: 3187 mV
CMD Active Level: 1860 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 12 Mhz
CMD Pullup Level: 3188 mV
CMD Active Level: 1859 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 3188 mV
CMD Active Level: 1860 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 3244 mV
CMD Active Level: 3291 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 12 Mhz
CMD Pullup Level: 3244 mV
CMD Active Level: 3292 mV
Can't init device. Reason: CMD Timeout Error
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 Mhz
Can't init device. Reason: CMD Timeout Error
easy - EasyJtag Suite Classic ver.: 2.9.0.1 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 10 (build 16299), 64-bit edition. Admin ri
For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...
OK
Initialising: SAMSUNG GT-I9190 Config ver.:1.00
Connecting to Target...
Done with error(s)...
Compression if OFF
Z3X EasyJtag Software ver. 2.9.0.1
Loading eMMC GEN2 Firmware... IO: 2800 mV
Box S/N: 7604E355A5D3B120, ,FW Ver.: 02.21
CMD Pullup Level:2988 mV
CMD Active Level:2790 mV
Box IO Level:2800 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
 |
|
|  |
Linear Mode
