Htq26adftac is 128 mb????

[lihua]

HTQ26ADFTAC IS 128 MB????
OPPO R9PLUS CAN NOT READ User Data!!!


Compression is ON
Z3X EasyJtag Software ver. 2.9.0.2
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 17170D0XXXXXX, ,FW Ver.: 01.62
CMD Pullup Level:2609 mV
CMD Active Level:2701 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 65646F4D204D4F520240020012C00040
EMMC CSD : D07FFF320F59007FF6DB80001E40001C
EMMC Manufacturer ID: 0065 , OEM ID: 646F
EMMC Date: 00/2013 Rev.0x40
EMMC NAME: M MOR , S/N: 33559232
EMMC NAME (HEX): 4D204D4F522000
EMMC ROM1 (Main User Data) Capacity: 128 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x78] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x78.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: M MOR _ 33559232_20180621_1638.extcsd
Partition table scan:
GPT: not present
Done.

[layder]

Originally Posted by lihua

EMMC NAME: M MOR , S/N: 33559232

This eMMC is Dead

M MOR - bad eMMC

[lihua]

iphone is open!!!!!!!!!!!!!!