i8190 cannot conect plz help..

[wadood]

i have i8190 that is only go to download mode but cannot flash with odin so i flash with dum file of easy jtag but set cannot conect with easy jtag........... what is the problem here is the log of conect

EasyJtag Suite ver.: 1.0.61.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1717FA0F8810FA9B ,FW Ver.: 01.47
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
Sending XLOADER...
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error writing:
libusb0-dll:err [_usb_reap_async] timeout error
error reading:
libusb0-dll:err [_usb_reap_async] timeout error
Done.
Target detection failure!!!
Done with error(s)...

[NoName®]

I think that you have phone with hardware fault. Check PCB board for water damage etc, or try another PC - USB didnt responce correctly on odin and on xloader commands.

[Sagitarious]

I have same problem with my Samsung Mini (8190) connected with ODIN but when flash usb not connected with computer.