I9001 Dead boot repair done and can't enter DL mode!

[habibtomb]

Tried to repair boot with easy repair option, after the repair done without errors the phone can't enter in Download mode, tried with jig and with buttons without success.

Log

For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Check security...OK
Initialising: SAMSUNG GT-I9001 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: XXXXXXXXXXXXXX ,FW Ver.: 01.48
Connecting to Target...
JTAG device: MSM8255
CPU IDCODE : 0x27B360E1 Mfg.: 0x070, Part: 0x7b36, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM8255 Scorpion Rev 2.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000015 Name : M8G2FA Size : 7.2 G , (15106048) Blocks
eMMC flash device(s) found, Device ID : 0x00150000
NAND Writing GPT...
eMMC Write OK! Elapsed time: 1.974113s (64.839 KiB/s)
NAND Writing DBL...
eMMC Write OK! Elapsed time: 6.137351s (62.568 KiB/s)
NAND Writing OSBL...
eMMC Write OK! Elapsed time: 14.222813s (62.997 KiB/s)
NAND Writing PRT5...
eMMC Write OK! Elapsed time: 62.127556s (65.929 KiB/s)
NAND Writing ABOOT...
eMMC Write OK! Elapsed time: 33.667927s (60.829 KiB/s)
NAND Writing PARAM...
eMMC Write OK! Elapsed time: 14.009801s (63.955 KiB/s)
All Done.

I tried to write full dump but without success too

Log

For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Check security...OK
Initialising: SAMSUNG GT-I9001 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: XXXXXXXXXXXXXX ,FW Ver.: 01.48
Connecting to Target...
JTAG device: MSM8255
CPU IDCODE : 0x27B360E1 Mfg.: 0x070, Part: 0x7b36, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM8255 Scorpion Rev 2.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000015 Name : M8G2FA Size : 7.2 G , (15106048) Blocks
eMMC flash device(s) found, Device ID : 0x00150000
Checking NAND Image : C:\Users\Ethan\Desktop\Samsung_GTI9001_2GB.bin
File successefuly loaded!
Writing memory from file...C:\Users\Ethan\Desktop\Samsung_GTI9001_2GB. bin
failed to open 'C:/Users/Ethan/Desktop/Samsung_GTI9001_2GB.bin' for read access
Done with error(s)...

I don't understand why it couldn't open the file?!

[habibtomb]

Any advices about this problem please?

[habibtomb]

Where's the support team?

[NoName®]

Hello, kindly check support- we have uploaded smaller dump.

[habibtomb]

Originally Posted by NoName®

Hello, kindly check support- we have uploaded smaller dump.

I wrote the file without problems, but the phone didn't want to go into download mode again i think it's a HW problem!

Anyway, thank you for your help This dump is correct!