i9070 dead boot done but not downlode mode - GSM-Forum

sanyomobile · 10-01-2014, 13:01

Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing GPT...
eMMC Write OK! Elapsed time: 0.359375s (356.174 KiB/s)
EMMC Writing XLOADER...
eMMC Write OK! Elapsed time: 2.750000s (139.636 KiB/s)
EMMC Writing PIT...
eMMC Write OK! Elapsed time: 4.531250s (225.986 KiB/s)
EMMC Writing STE MEM INIT...
eMMC Write OK! Elapsed time: 2.406250s (212.779 KiB/s)
EMMC Writing PWR MGT...
eMMC Write OK! Elapsed time: 3.640625s (140.635 KiB/s)
EMMC Writing SBL...
eMMC Write OK! Elapsed time: 13.296875s (154.021 KiB/s)
EMMC Writing SBL2...
eMMC Write OK! Elapsed time: 13.828125s (148.104 KiB/s)
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 11.609375s (88.205 KiB/s)
EMMC Writing IPL MODEM...
eMMC Write OK! Elapsed time: 8.703125s (235.318 KiB/s)
All Done.

dead boot done but phone still dead

sanyomobile · 10-02-2014, 07:22

easy jtag team sleeeping why u not replying.......i creat so many thread but no reply from any suppoter

vikboston · 10-02-2014, 10:51

Hi,
Could you read back some dump 128Mb after resurection.
Possible eMMC problem, like write protection or eMMC fw problem.
Written data needs to be veryfied.
Also how did you enter download mode :
press VOL DOWN+PWR or plug magic usb jack?
What this phone boot damage history?

sanyomobile · 10-02-2014, 12:27

Thanx for reply

i have no dump file

i plug magick usb cable but not enter download mode

i dont know whats damge history

vikboston · 10-02-2014, 16:06

I mean, how phone become dead (after some flashing or no reason etc.).
You don't have dump file, but you can read for me first 128Mb or 64Mb
and share link I can analyze dump to make sure that eMMC written correctly
and in working condition.

10-01-2014, 13:01	#1 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	i9070 dead boot done but not downlode mode Connecting to Target... U8500 USB BOOTROM : device 04CC:8500 opened success: set configuration #1 success: claim_interface #0 Sending XLOADER... success: bulk read 4 bytes Done. JTAG device: U8500 CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4 CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9 JTAG device: U8500 CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6 CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC Halting CPU... Initialize hardware... Starting target communication... Detecting emmc memory parameters of bank (0) ... EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks eMMC flash device(s) found, Device ID : 0x00450000 EMMC Writing GPT... eMMC Write OK! Elapsed time: 0.359375s (356.174 KiB/s) EMMC Writing XLOADER... eMMC Write OK! Elapsed time: 2.750000s (139.636 KiB/s) EMMC Writing PIT... eMMC Write OK! Elapsed time: 4.531250s (225.986 KiB/s) EMMC Writing STE MEM INIT... eMMC Write OK! Elapsed time: 2.406250s (212.779 KiB/s) EMMC Writing PWR MGT... eMMC Write OK! Elapsed time: 3.640625s (140.635 KiB/s) EMMC Writing SBL... eMMC Write OK! Elapsed time: 13.296875s (154.021 KiB/s) EMMC Writing SBL2... eMMC Write OK! Elapsed time: 13.828125s (148.104 KiB/s) EMMC Writing PARAM... eMMC Write OK! Elapsed time: 11.609375s (88.205 KiB/s) EMMC Writing IPL MODEM... eMMC Write OK! Elapsed time: 8.703125s (235.318 KiB/s) All Done. dead boot done but phone still dead

10-02-2014, 07:22	#2 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	easy jtag team sleeeping why u not replying.......i creat so many thread but no reply from any suppoter

10-02-2014, 10:51	#3 (permalink)
vikboston Product Supporter Join Date: May 2011 Posts: 286 Member: 1569669 Status: Offline Thanks Meter: 257	Hi, Could you read back some dump 128Mb after resurection. Possible eMMC problem, like write protection or eMMC fw problem. Written data needs to be veryfied. Also how did you enter download mode : press VOL DOWN+PWR or plug magic usb jack? What this phone boot damage history?

10-02-2014, 12:27	#4 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	Thanx for reply i have no dump file i plug magick usb cable but not enter download mode i dont know whats damge history

10-02-2014, 16:06	#5 (permalink)
vikboston Product Supporter Join Date: May 2011 Posts: 286 Member: 1569669 Status: Offline Thanks Meter: 257	I mean, how phone become dead (after some flashing or no reason etc.). You don't have dump file, but you can read for me first 128Mb or 64Mb and share link I can analyze dump to make sure that eMMC written correctly and in working condition.